Autolink

- Model 25 - Field Transfer Trailers

From

0

The product has been in development for a period of 3 years. It has been tested during the 2008 and 2009 harvest with barley, wheat and sunflower. The major parts such as the frame, the axles, the reduction gear, cylinders, ball bearings, tires and other are from leading European manufacturers. Details can be found in the product specification. The product itself, has been manufactured on a specialized production line which guarantees high quality and long life.

IRGOS field transfer trailers for grain are the key implements for efficient harvesting, increasing combine output by around 30 percent.
Use the PIRGOS system as mobile drill fillerand increase sowing area performance and ease of drilling.

Your advantages:
Better performance during grain and rapeseed harvests through combine tank emptying on the move
More efficiency at sowing time through speedier filling of drills
Less soil compaction in the fields through the large volume low profile tyres
Lorries stay on the road and do need to enter the fields
Sufficient capacity of hopper for modern combine harvesters
4.50 metre auger height meaning all road transport vehicles can be rapidly and safely loaded

MANUFACTORING: the product has been in development for a period of 3 years. It has been tested during the 2008 and 2009 harvests with barley, wheat and sunflower. The major parts, such as the frame, the axles, the reduction gear, cylinders, ball bearings, tires and other are from leading European manufacturers. Details can be found in the product specification. The product has been manufactured on a specialized production line, guaranteeing high quality and long life.

HAREVESTING: One Field transfer trailer can service between 2 and 3 harvesters, thus increasing effectiveness by up to 30%. A combine unloads for 1-2m in the FTT (field transfer trailer). The FTT moves on the next combine/s, which also unload for a total of 5-6m The FTT then travels to the lorry for 3-5m depending on the distance and unloads for 2m with 1 additional minute necessary for maneuvering. One cycle lasts around 20 minutes.

SOWING/DRILLING: the trailer can be used to fill the seeders/drillers with seed. The trailer is filled with seed, which it unloads to each driller via the the auger and the chute. The flow of seed can be controlled at all times with the restriction valves. One cycle of the trailer with 15t is enough for around 500 da.

FERTELLIZING: as with sowing, the trailer can be used to fill the fertilizer spreaders on the field quickly and efficiently.

TRANSPORT: the trailer can be used to transport grain as it can be unloaded via the emergency slide valves without the use of the auger.

FRAME: The trailer is built on a frame and the box is easily removed and replaced with a dumper or other body trailer.

Hopper volume: 25 m3
Auger unloading rate: 300-430t/h
Unloading time: 2 min.
Weight fully loaded: 22,000kg
Weight empty: 8,7000kg
Usable weight: 15,300kg

Dimensions
Length: 9050mm
Width: 2850mm
Height: 3600mm

Auger measurments
Diameter: 412mm
Length: 5200mm
Height: 4560mm

Suspension: tandem - 2 axle parabolic leaf springs and
steering axle with hydraulic locking

Braking system: twin circuit air brakes

Vertical load of draw-bar: 2000kg

Tires: 700/50-26.5

Top speed: 40km/h

Min. tractor requirements: 165Hp/132KW

ADITIONAL STANDART EQUIPMENT
Emergency slide valves for unloading
Dual restriction valves to stop the product
during operation
Load cover as standart
Seed chute

Customer reviews

No reviews were found for PIRGOS - Model 25 - Field Transfer Trailers. Be the first to review!