AMANDUS KAHL - Proportioning and Conveying Screws for Bulk Material Handling
A simple design and low maintenance requirements - this is what distinguishes our KAHL proportioning and conveying screw and ensures a high level of operational reliability. The proportioning and conveying screw is suitable for conveying bulk products of any kind in horizontal or ascending direction. Apart from our standard lengths of 1500, 2000, 2500 and 3000 mm, we also supply special lengths on request. The worm shaft consists of a tubular shaft with welded-on solid thread (sheet steel). In addition, it runs on anti-friction bearings with stuffing box packing. If larger lengths are required, maintenance-free intermediate bearings are used. The tubular shaft parts are connected by means of bolts. The inlets and outlets can be arranged according to requirement. The proportioning and conveying screw is driven by offset geared motors - however, if space is limited, other drive types are also possible.
Product Overview:
The conveying screws serve for continuous transport of bulk material in horizontal or ascending direction. The simple design and low maintenance requirements of the conveying screws contribute to their high operational reliability. The screw troughs with removeable covers are executed in a stable construction.
The troughs, in the standard lengths of 1500, 2000, 2500, 3000 mm, are connected with each other by means of flanges. Special trough lengths are available.
The worm shaft consists of a tubular shaft with welded-on solid thread made of sheet steel. It runs on antifriction bearings with stuffing box sealings. In case of larger lengths maintenancefree intermediate bearings are used.
The tubular shaft parts are connected by means of bolts. The inlets and outlets can be arranged according to requirement. The screws are driven by offset geared motors. If sufficient space is lacking, other drive types are possible, too.
Designs:
- Controllable proportioning screws
- Conveying screws
- Thread types: solid blade thread, belt thread, paddle thread
Proportioning and conveying screws
The arrangement of the inlets and outlets, the thread type, and the direction of rotation depend on the local conditions.
The following examples show the 4 most frequent de...
The following examples show the 4 most frequent designs:
- Right-hand thread, anticlockwise rotation, conveying away from the drive.
- Right-hand thread, clockwise rotation,conveying towards the drive.
- Right-hand and left-hand thread, clockwise rotation, conveying from the centre to the ends.
- Right-hand and left-hand thread, anticlockwise rotation, conveying from the ends to the centre.
- Speed sensor,
- Product detector,
- Air shut-off flap
Customer reviews
No reviews were found for AMANDUS KAHL - Proportioning and Conveying Screws for Bulk Material Handling. Be the first to review!