DIG Corporation

Model Series 038 - Micro Sprayer



Designed for use in greenhouses, 52-038-xx micro sprayers produce fine droplets and come in a wide range of flow rates. Ideal for maintaining conditions conducive to propagation and germination. An optional anti- leak device prevents dripping at the beginning and the end of each irrigation cycle, keeping the entire line pressurized.

  • Use in germination, seeding and rooting in greenhouses and nurseries
  • Use for overhead irrigation, propagation and cooling in greenhouses and nurseries

  • Maintains constant humidity or cooling in greenhouses
  • High uniformity due to distribution accuracy and low precipitation rate



  • Excellent performance with uniform water distribution
  • Color coded nozzles for flow rate identification
  • Modular design allows for a wide range of interchangeable components
  • Suitable for upright and inverted position

Performance and Technical Data

  • Material: polyacetal
  • Flow rates: 9 - 42 GPH (35 l/h - 160 l/h)
  • Nominal flow rate: 29.4 PSI
  • Wetting diameter: 6.5' - 13' (1.9 - 3.9 m)
  • Operating pressure: 20-35PSI(1-2.4BAR)
  • Operating pressure for overlap irrigation: 35 PSI (2.4 BAR)
  • Pattern: 340°
  • Trajectory angle: approximately 1°
  • Average droplet size: .0008' (0.2 mm) very fine at 45 PSI
  • Filter requirements: 120 mesh (130 micron) upto24GPH,24-42 GPH 80 mesh (180 micron)

Customer reviews

No reviews were found for Model Series 038 - Micro Sprayer. Be the first to review!