Tnemec Company, Inc.

- Model Series 1028 - High Dispersion Pure Acrylic Polymers

0

Generic Type: HDP Acrylic Polymer. Common Usage: Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Application methods include 'dry-fall' under certain conditions (See Application). Note: Series 1028's 'dry-fall' characteristics help to reduce the potential for overspray problems on buildings and surrounding property.

  • Colors: Refer to Tnemec Color Guide. Note: Certain colors may require multiple coats depending on method of application and finish coat color. When feasible, the preceding coat should be in the same color family (blue, gray, etc.), but noticeably different.
  • Finish: Gloss - Note: Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
  • Primers: Wood: Series 10-99W, V10-99W or 151-1051
  • Steel: Series 1, 10, 22, 30, 37H, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, 90G-1K97, 91-H2O, 94-H2O, 113, 115, 135, L140, L140F, N140, N140F, V140, V140F, 141, 161, 287, 394. Note: Allow Series 10, V10 and 37H to cure three days before topcoating. Additionally, Series 1, 90-97, 90G-1K97, 91-H2O, 94-H2O and 394 must be exterior exposed for three days prior to topcoating. Note: This product exhibits direct-to-metal capabilities for dry interior environments. Contact Tnemec Technical Service for more information.
  • Aluminum & Galvanized: Series 66, L69, L69F, N69, N69F, V69, V69F, 115, 135
  • Concrete: Self-priming or Series 6, 54, 66, L69, L69F, N69, N69F, V69, V69F, 130, 151, 156, 180, 287, 1254
  • CMU: Series 54, 130, 1254
  • Drywall: Series 51, 151-1051, 287
  • Topcoats: Series 1029, 1080, 1081
  • Volume Solids: 40.0 ± 2.0% †
  • Recommended DFT: 2.0 to 3.0 mils (50 to 75 microns) per coat.
  • Curing Time
    • Temperature: 75°F (24°C)
    • To Touch: 30 minutes
    • To Handle: 2 hours
    • To Recoat: 2 hours
    • To Resist Moisture: 6 hours
    • Curing time varies with surface temperature, air movement, humidity and film thickness.
  • Volatile Organic Compounds: Unthinned: 0.79 lbs/gallon (94 grams/litre)
  • Thinned 5%: 0.79 lbs/gallon (94 grams/litre) †
  • HAPS: Unthinned: 0.35 lbs/gal solids
  • Thinned 5%: 0.35 lbs/gal solids
  • Theoretical Coverage: 633 mil sq ft/gal (15.5 m²/L at 25 microns). See APPLICATION for coverage rates. †
  • Number of Components: One

Customer reviews

No reviews were found for Enduratone - Model Series 1028 - High Dispersion Pure Acrylic Polymers. Be the first to review!