SiloPro - Roof Systems
From Flat Bottom Silos
Our aim for designing the silo roof with 30° degree inclination is to easily flow out the moisture in the silo. During the ventilation, it also helps the air to flow out easily. SILOPRO roofs are produced to be resistant upto a maximum peek load from 15.000lb. to 30.000lb. During designing, we consider values as a standart in snow load 40lb/ft and in wind load 90mph. Silos between 3.65 mt-12.80 mt diameters have roof structure supported on a single stage. This type of roof structures are suitable to carry loads up to 907kg (2.000lb.) and have resistance against 78 kg/m² (16 psf) alive loads.
In 14.63 mt diameter and above silos,we use CNC bending twisted double stage beams. This type of roof structures are suitable to carry loads up to 4.536 kg (10.000lb.) and have resistances against 122 kg/m² (25 psf) alive loads.
SILOPRO roof panels are triangle in shape and both sides of the panels are roll formed as a 90 mm deep trapeze. There are inspection covers on each silo roof providing entrance in to the silo when the grain level is above the sidewall access door.