SULPRO is a herbicide additive for post-emergence treatment. Under difficult application conditions, such as low humidity, hot and dry weather or weeds with thick waxy layers, SULPRO ensures reliable control success. SULPRO contains surface-active components that lower the evaporation rate of the spray solution and simultaneously promote the formation of a very uniform spray film on the leaf surface. The active substance absorption through the leaf is improved, and the active substance applied to the leaf is utilised more efficiently.
Active substance: 75% polyoxyethylene, propoxypropanol; 15% alkyl polyglycol ether
- Reliable efficacy even under dry conditions and with pronounced waxy layers
- Rapid active substance absorption into the leaf at low temperatures
- Better efficacy against larger weeds and grasses (> 4-6 leaves)
- More reliability against weeds that are harder to control and problem weeds
- Cost-effectiveness thanks to significantly improved utilisation of the applied active substance
- Earlier onset of the herbicidal effect
- Rapid elimination of weed competition
- Low application rate
- Optimal miscibility
- Full crop tolerance
SULPRO® is combined with herbicides for post-emergence treatment, particularly for herbicides from the sulfonylurea group, which exhibit good activity in the neutral pH range, but always need a wetting agent to act quickly enough. Use is particularly recommended when working with reduced application rates, when spraying on weeds that have already developed a hard waxy layer under dry conditions, or when larger weed stages are already dominant in the crop.
SULPRO® can be mixed with all commercially available crop protection products.
Do not use for late applications of growth regulators or in combination with oil-based additives.
SULPRO® enhances the efficacy of herbicide mixtures. Herbicide mixtures with the constraint (WP734) „Possible damage to crops“ should only be treated with SULPRO® after previous consultation.
100 – 200 ml/ha (0,1 – 0,2% of the spray solution)
Under dry conditions, the higher application rate should be selected.
Fill 2/3 of the spray tank with water. Add the crop protection product according to the manufacturer specifications. With the agitator running, add SULPRO® and then continue to fill the tank. Use the mixed spray liquid as quickly as possible.