- Model TC-12 - Tree Chipper

From

0

The TC-12 can be equipped with either a Pintle or 2-5/16' Ball hitch. Either hitch includes a safety chain and breakaway brake switch for added safety.

OPTIONAL FEED HEIGHT SENSOR
The optional feed height sensor is located at the top of the hopper. After sensing the height of the log, the feed wheel will automatically adjust the feed wheel to allow larger logs to enter more easily.

360 DEGREE ROTATING DISCHARGE SPOUT
The TC-12 is equipped with a flexible discharge system that features a 360 degree, hydraulic rotation and an adjustable chip spout.

PT TECH HPTO 8 MICROPROCESSOR CONTROLLED CLUTCH
PTTech HPTO 8 microprocessor controlled clutch with 4-groove belt system. The HPTO Clutch provides easy startups and provides torque overload protection for the disc, engine and driveline. For maximum control and protection the clutch comes with a clutch control interface.

FEED ROLLER W/ADJUSTABLE, DUAL SPRING-LOADED DOWN-PRESSURE
The feed roller is equipped with adjustable, dual spring-loaded down-pressure, which continually applies optimum downforce on material flow. It is also equipped with hydraulics to lift feed roller if required.

DUAL CONTROL PANELS
Control panels are accessible on both sides of the hopper. Each control panel contains an emergency stop button. An emergency bumper bar is also located on either side of the hopper for instant shut-off of the feed wheel.

OPTIONAL GATHERING WINCH
The optional gathering winch hydraulically helps pull larger logs up to the hopper. Free wheeling discharge allows for easier unrolling of winch.

ENGINE OPTIONS
With engine options of CAT C4.4 129 hp (96 kw)or Kubota V3800 88 hp (74 kw), and a PT-Tech clutch, the powerful TC-12 can grind trees and limbs up to 12 inches in diameter.

7,000 LBS JACK
The TC-12 features a jack with a 7,000 lbs (3,175.2 kg) capacity.

40 GALLON FUEL/25 GALLON HYDRAULIC OIL
The TC-12 features a 40 gal. (152 L) fuel capacity and a 25 gal (95 L) hydraulic oil capacity.

42 INCH CHIPPING DISC
The chipping disc is 42' in diameter and 2' thick. There are four 7-3/4' knives in two locations on the disc. Four kickers help to discharge material from disc area. A convenient service lock pin holds the disc solid while servicing the knives on the disc.

7,000 LBS TORFLEX AXLE VW ELECTRIC BRAKES
The TC-12 comes equipped with a 7,000 lbs (3,175.2 kg)torflexaxle with an electric braking system.

EASY ACCESS TO THE ANVIL
The TC-12 is designed with easy access to the anvil. The anvils are made of 1/4' AR400 steel plate and each has four cutting edges.

Engine CAT C4.4 129 hp (96 kw)
Kubota V3800 88 hp (74 kw)
Gross Weight 7,640 lbs. (3,465.5 kg)
Transport Width 6' 7-1/16' (201 cm)
Transport Length 17' 9-13/16' (543 cm)
Transport Height 8' 9-1/16' (267 cm)
Hitch Pintle or 2-5/16' Ball
Tongue Weight 740 lbs. (335.7kg)
Jack 7,000 lbs (3,175.2 kg)
Axle 7,000 lbs (3,175.2 kg) Torflex
Suspension Torsional
Brakes Electric
Tires 235/85R 16E
Fuel Capacity 40 gal (152 L)
Hydraulic Oil Capacity 25 gal (95 L)
Electrical 24V
Lights Clearance and Directional
Transmission PT Tech HPTO 8
Chipping Capacity 12' (30.5 cm)
Infeed Hopper Opening 40' x 62' (102 cm x 157 cm)
Throat Opening 12' x 20' (30 cm x 51 cm)
Disc Size 42' (107 cm) dia. x 2' (5 cm)
Disc Shaft Size 3-15/16' (10cm) dia.
Feed System Hydraulic 2 Drum
Number of Knives 4, 2 slots
Size of Knives 4-1/2' (11.5cm) x 7-3/4' (19.5cm) 3-bolt
Feed Wheel Adjustable Hydraulic and Spring Loaded Down Pressure System
Discharge System 360°, Hydraulic Rotation w/ Adjustable Chip Spout
Safety Features Breakaway Brake Switch, 2 E-Stop Switches, 2 Infeed Hopper Light Bars, Disc Hood Closed Proximity Switch
Frame Size 3' (7.6 cm) x 5' (12.7 cm) x 1/4' (0.64 cm)

PINTLE OR 2-5/16' BALL HITCH
The TC-12 can be equipped with either a Pintle or 2-5/16' Ball hitch. Either hitch includes a safety chain and breakaway brake switch for added safety.
 
FEED HEIGHT SENSOR
Senses the height of the log, and automatically adjusts the feed wheel to allow larger logs to enter more easily.
 
GATHERING WINCH
The gathering winch hydraulically helps pull larger logs up to the hopper. Free wheeling discharge allows for easier unrolling of winch.

Customer reviews

No reviews were found for DuraTech - Model TC-12 - Tree Chipper. Be the first to review!