Whirlston Pellet Machinery

Turn Crop Straw into Pellet Fuel and Pellet Feed with Straw Pellet Plant

0
Straw Pellet Plant Processing Steps 1.Grinding Before pelleting, straw should be ground into uniform size of less than 5mm, at this time wood hammer mill can be the best choice. 2. Drying Straw is often air-dried, with a moisture content of typically 15%. However if the moisture content is higher than 15%, one rotary drum dryer is then necessary. 3. Pelleting Straw is pressed into pellets under the pressure of straw pellet mill. Common size for straw is 6mm and 8mm. 4. Cooling After pelleting, straw pellets is with high temperature, so in order to maintain its quality pellets cooling machine is needed. 5. Packing Use a pellet packing machine to seal straw pellets in bags so that the storage and delivery can be made easier. Comparison or Straw and Straw Pellets 1. Better combustion features 2. More environmental friendly 3. More economical benefit 4. Easier to transport and store

Customer reviews

No reviews were found for Turn Crop Straw into Pellet Fuel and Pellet Feed with Straw Pellet Plant. Be the first to review!