Warren & Baerg - Model 200HD - Cube Densification Systems
The Model 200HD Cuber is the heart of Warren & Baerg’s cube densification systems. The direct coupled configuration of the Model 200 HD provides a smooth and efficient drive mechanism. The Cubing head is designed for strength and simplicity. There are only three bearings in the cubing head, and all of these are serviceable while running. The densification process itself is a dual action, continuous extrusion process which enables a large volume of material to be cubed at the rate of 8 to 10 tons per hour. The Mixer / Conditioner mounted directly above the cubing head accurately controls water application with six remotely operated electrical solenoid valves. Water usage is minimized by thoroughly mixing all additives and materials to be cubed.
-
Most popular related searches
Product Overview
- Easily serviced while in operation
- Reduces power requirements for densifying and pre-grinding
- Multiple die sizes to meet market requirements
Specifications
- INFEED OPENING: 20' x 21' (50.8 cm x 53.3 cm)
- STANDARD INFEED HEIGHT: 76' (193 cm)
- STANDARD OVERALL HEIGHT: Top of mixer 108' (274 cm). Top of infeed to cuber 76' (193 cm)
- APPROXIMATE WEIGHT: 14,000 lb (6350 kg) with 200 hp motor and mixer
- MOTOR: 200 hp, 1800 rpm, T.E.F.C., 445 T Frame with planetgear reducer (Optional 150 hp)
- CLUTCH: Optional: 14' twin disc clutch
- FRAME: 12' (30.5 cm) channel – top. 15' (38.1 cm) channel – bottom
- CUBER DEFLECTOR DISCHARGE: 21' (53.3 cm) from floor
- DIES: 66 individual blocks, high alloy steel throughout, hardfaced with tungsten carbide, heat treated and chromed
- PRESS WHEEL: 22' (55.9 cm) diameter, outer diameter and working area hard faced
- BEARING: Front and rear double roller, self aligning
- MIXER: 5 hp drive, 22' (55.9 cm) diameter, 12’ (3.65 m) long peg type. Six spray nozzles each with 220 V solenoid on/off valves – No steam required. 1 – 4% water 60 PSI
- PRODUCTION: 8 ton per hour with good quality alfalfa and proper grind and moisture. Particle size – 3' (7.62 cm) minus. Moisture 10% - 12% range
- EXPECTED MAINTENANCE: Average 4,500 tons per set of dies and press wheel
- POUNDS PER CUBIC FOOT of CUBES: Bulk density is 28 – 32 pounds (450 kg – 512 kg per cubic meter)
Customer reviews
No reviews were found for Warren & Baerg - Model 200HD - Cube Densification Systems. Be the first to review!