Woodland Mills Forestry Equipment

- Model HM126 - Portable Sawmill


Woodland Mills is proud to offer the T-Rex utility trailer. It was designed as a heavy duty and highly versatile trailer for acreage owners to aid in maintaining their woodlots and properties. Intended to be towed behind your ATV, UTV or tractor, it will haul dirt, rocks, firewood, logs and more. It easily converts from a dump box trailer to a log hauling trailer. The T-Rex makes the perfect addition for property owners and sawyers.

All major steel components feature either a powder coated or galvanized steel finish. This ensures your mill will stand up to nature’s elements. We recommend covering your mill when not in use, but if you forget, it’s good to know the mill will endure nature.

The head moves up and down along galvanized steel channel via a very easy to turn hand crank system. Two cam locking handles secure the head in place while making cuts.

The blade is kept lubricated by utilizing a water drip system. This prevents sap from gumming up your blade.

  • 9.5 H.P Kohler gas engine
  • Centrifugal clutch blade engagement system
  • 26″ log diameter capability
  • 21″ throat opening between blade supports
  • 10 ft log lengths (additional tracks available)
  • 19″ cast iron band wheels
  • 6.5L aluminum lubrication tank to keep the blade lubricated while cutting
  • Hand crank system to raise and lower the head with very little effort
  • Cam locking handles to secure the head vertically while making cuts
  • Powder coated and galvanized steel finishes
  • “Gas and Go” easy handle throttle design


The mill is capable of cutting 26-inch diameter logs up to 10-feet long. Additional track sections are available in 6-foot increments. Capable of squaring cants at 20-inches or skimming veneers at as thin as1/16 of an inch. The HM126 will cut within 1-inch of the deck ensuring you maximize your usable board foot output.


Our mills are powered by a 9.5 H.P 4-cycle Kohler gas engine. It features a slant cylinder design, with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean 4-stage air filtration system ensures only clean air enters the engine for maximum power and life of the engine. In addition, this engine is backed by a 3 year commercial warranty.

Attached to the engine is an industrial centrifugal clutch system which offers “gas and go” efficiency and ease.


The head of our machine rolls along rigid 2.5″ x 4″ “L” channel which is cross supported with heavy duty 3″ x 6″ rectangle channels. These cross supports ensure the weight of the log is dispersed over a large bearing surface to avoid marking the log with indentation. These heavy duty cross supports also provide additional rigidity to the track system. The track also features a simple adjustable log support to securely hold the log while milling. The track itself consists of two 6 ft sections allowing for 10 ft log lengths. Additional 6 ft tracks may be attached to accommodate logs of any length.


The HM126 utilizes standard 1.25″ x 144″ x .042″ Lenox Woodmaster C Sharp hardened tipped blades which are available through Woodland Mills. Blade kerf is kept to a minimum at just .080″ to maximize the most amount of lumber per log.


The sawmill is covered with a 2 year warranty against manufacturer’s defect and excludes wearing parts (belts, blades & bearings). The Kohler engine is covered by a 3 year commercial warranty which is honoured through any Kohler small engine dealer.

Customer reviews

No reviews were found for Woodland - Model HM126 - Portable Sawmill. Be the first to review!