Agricultural industry Software near South Dakota

  • SeedSense - Version 20/20 - Planter Monitor System

    The planter monitor in your cab today delivers sanitized population data. It tells you if you are within your target planting population with about a ten percent margin of error. So if you have 5% skips and 5% doubles, your monitor is happy because you are planting at 100% population. That’s not good enough. The 20/20 SeedSense Monitor ...

    By Precision Planting, Inc. Distributor in Aberdeen, SOUTH DAKOTA (USA).

  • Outback Guidance MAX - GPS System

    Outback MAX™ redefines simplicity in precision farming. Featuring an HD screen, rugged exterior, camera monitoring with up to four cameras and user friendly software, optional switchbox and lightbar that conveniently attach to the console, the MAX has it all. The MAX terminal works seamlessly with eDriveX with eTurns for all of your ...

    By Outback Guidance Distributor in Freeman, SOUTH DAKOTA (USA). from Terminals Software line

  • Outback Guidance STX - Guidance System

    The Outback STX Guidance System is the culmination of combining full RTK capability in an autosteer ready, value based terminal. The Outback STX incorporates some of the industry’s best innovations in a system priced below competitive terminals in this segment of the market.

    By Outback Guidance Distributor in Freeman, SOUTH DAKOTA (USA). from Terminals Software line

  • Trial Database Software

    ARM Trial Database is a relational Access database for storing and retrieving trials based on standard ARM “GDMdef” study definitions. ARM directly exports and imports trials in the database, and Microsoft Office™ products can be used to build customized reports for trials extracted from the database. ATD stores ...

    By Gylling Data Management, Inc. (GDM) based in Brookings, SOUTH DAKOTA (USA).

  • ARM - Tablet Data Collector Software

    The ARM Tablet Data Collector (TDC) is a Windows 8 touch tablet computer plus the Tablet Data Collector add-in running within ARM version 9.1 or newer. Use the TDC to record all trial information at the trial site directly into the actual ARM trial.

    By Gylling Data Management, Inc. (GDM) based in Brookings, SOUTH DAKOTA (USA).

  • Version ARM ST - Summary Across Trials Software

    ARM ST (Summary Across Trials) is an add-in option that fits into an installed ARM program. This valuable tool combines and averages similar assessments in ARM trials across locations and years. ARM ST helps researchers average and report similar trials conducted at several locations, or multiyear trials. Because ARM ST uses the ARM interface, an ...

    By Gylling Data Management, Inc. (GDM) based in Brookings, SOUTH DAKOTA (USA).

  • Agriculture Research Managing Software

    ARM is software for establishing, managing, and summarizing of herbicide, insecticide, fungicide, seed/variety, fertilizer, general non-chemical, nematicide, and plant growth regulator research trials. ARM manages agriculture research trials throughout the entire research season, and is most beneficial for field and greenhouse researchers. It is ...

    By Gylling Data Management, Inc. (GDM) based in Brookings, SOUTH DAKOTA (USA).

  • Statistical Handbook Software

     In 2014 Gerard de Kerchove (author) and Andrew Norton of PDM Associates (editor) published the 2nd Edition of their very popular book A Statistical Handbook for Agricultural Field Trials Specialists. The handbook is updated with features new in ARM 9, such as the additional experimental designs and significance levels. The statistical ...

    By Gylling Data Management, Inc. (GDM) based in Brookings, SOUTH DAKOTA (USA).

  • PCM - Version HMI - Feedmill Batching Software

    NDC inc has developed a complete HMI batch weighing software package that is specifically designed for dealers and contractors that specialize in customizing and manufacturing computerizing feed-mill batching systems. The graphical software is designed for interfacing an Standard computer with a Rice Lake 920i scale indicator with an industrial ...

    By NDC Incorporated based in Elkton, SOUTH DAKOTA (USA).

  • Maximix Feed Management Software

    The Maximix feed management software was designed for improving labor efficiency,. accuracy and profits in both modem feed mill and livestock operations. The software. seamlessly integrates ingredient price management, real-time inventory control. formulation management and feed cost and usage reports.. The software has numerous user selectable ...

    By NDC Incorporated based in Elkton, SOUTH DAKOTA (USA).

  • AccuFarm - MGR System

    In April 2013 AgWare purchased the AccuFarm MGR system from AccuTech Systems Corporation and we are excited to have it as part of our company. We are excited to take our software knowledge and expand into the Farm Manager arena. Our first task is to build a new version of the software that is compatible with the last version of AccuFarm.  ...

    By AgWare, Inc. based in Piedmont, SOUTH DAKOTA (USA).

  • Version Pro - Virtual Optimizer Software

    The ultimate solution for bringing critical precision irrigation management technologies into one, powerful, easy-to-use platform.

    By CropMetrics based in NEBRASKA (USA).

  • Precision Agricultural Management Software

    Precision agricultural management is a systems approach and CropMetrics believes that one of the most integral pieces to the overall solution is local agronomy support.  There are no magic bullets and there is not one single answer for every field.  Every field is field specific, and to determine the most optimal solutions and strategy ...

    By CropMetrics based in NEBRASKA (USA).

  • Variable Rate Irrigation Software

    Increase water use efficiency and improve production on irrigated crop fields by applying the optimum application depths of water at both the right time and the right place. Utilize real time weather data and forecasting into zone management modeling to improve site specific irrigation scheduling.

    By CropMetrics based in NEBRASKA (USA).

  • Version 5400/7000 - Stalk Choppers

    The double rotor rolling stalk chopper is a versitile tool with applicatons in most farming practices, from ridge-till to conventional farming. With no gearbox or U-joints to maintain, this low-maintenance tool will provide years of dependanble service.

    By Besler Industries, Inc Distributor in York, NEBRASKA (USA).

  • Version 2000 - Root Slicers

    The Root Slicer is ideal for pre-plant seed bed preparation in a variety of crops such as corn, milo and sunflowers. It can be adjusted to cut the root crown from the ground allowing minimum till farming with little ground disturbance. Low tractor horsepower, and high-speed operation allows for quick and efficient ground preparation. Recommended ...

    By Besler Industries, Inc Distributor in York, NEBRASKA (USA).

  • Brill Formulation Software

    You don’t have time to guess or wonder, looking every which way for the data you need. With Brill Formulation, you won’t have to. Brill Formulation helps you get your formulas into production faster, reducing painful manual work to save time and money.

    By Format Solutions Office in Fargo, NORTH DAKOTA (USA). from Formulation Software line

  • Feed Mill Manager Software

    You want more control over every aspect of your operation. We can help, no matter the size of your business. Using our world-class knowledge of feed mill operations, our Feed Mill Manager solution gives you greater visibility into the variables that make the difference in how well your mill runs, so you can make real-time adjustments. Reduce the ...

    By Format Solutions Office in Fargo, NORTH DAKOTA (USA). from Operations Software line

  • Feed Ration Balancer Software

    Take your ration balancing to the next level with our Feed Ration Balancer™ solution. You can expect more predictable results from your diets and reduce their overall cost per unit of nutrition. Developing and updating individualized rations across multiple species has never been easier.

    By Format Solutions Office in Fargo, NORTH DAKOTA (USA). from Formulation Software line

  • Veterinary Feed Directive Software

    Regulations are changing, and we have tools to help you. The Veterinary Feed Directive rules coming into effect in the U.S. on Jan. 1, 2017, change how and when feed manufacturers and animal producers can provide drugs to animals. We’ve built a module for Feed Mill Manager users that helps you comply with these new rules, reducing your worry ...

    By Format Solutions Office in Fargo, NORTH DAKOTA (USA). from Operations Software line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you