Only show results available in Massachusetts? Ok

grape pump (Grape Handling) equipment

  • PVM - Whole and Crushed Grape Pump

    Mono pump

    By VLS Technologies based in San Zenone degli Ezzelini, ITALY. from Receiving, crushing and pressing Product line

  • Model T6 - Hopper for Grape With Pump

    The T6 hopper is produced in two standard versions: 3x2 m and 4x2 m entirely in AISI 304 stainless steel, satin finish and tig welding for a perfect seal. The tank is built with a particular asymmetric inclination of the walls, which makes the product descent  highly effective and avoids formation of the bridge on the cochlea. Complete with ...

    By Strazzari S.r.l. based in Osteria Grande, ITALY. from Hoppers Product line

  • Taylor - Grape Harvester

    Pull Type Harvester. For Single Trellis Vineyard. Electric-over- Hydraulic Controls. 45 HP Tractor PTO Hydraulic Pump. Harvest grapes on your schedule!.

    By Taylor Manufacturing, Inc. based in Elizabethtown, NORTH CAROLINA (USA).

  • Marc - Model G6-150 - Pump for Grapes

    Ideal for marc or for not particularly fluid products, rotor D. 300x150, it is also suitable for the transfer of whole and de-stemmed grapes, with adequate pipes reaching large heads of 10 m. in height or 50. m. in distance. Reclinable stainless steel hopper to obtain smaller height dimensions, it is complete with stainless steel auger protection ...

    By Strazzari S.r.l. based in Osteria Grande, ITALY. from Pump Product line

  • Marc - Model G6-150S - Pump for Grapes

    Elliptic rotor PUMP, maximum containment of dimensions, the pump for grapes and marc G6-150S, rotor D. 300x150, has an hourly capacity (140 ql/hour). Fixed stainless steel hopper, complete with stainless steel auger protection grid. Bolted discharge cone with side inspection hatch, for cleaning and control of the pump interior, Ø 100 ...

    By Strazzari S.r.l. based in Osteria Grande, ITALY. from Pump Product line

  • Marc - Model G8 - Pump for Grapes

    For the transfer of grapes and marcs and semi-solid products. Ideal for whole and de-stemmed grapes, very wide passages 300x200, hourly production of 250 ql/hour with a low number of revolutions. It acts by pressure and not by centrifugal force, it ensures the best possible treatment of the pumped product avoiding breaking of the stalks and ...

    By Strazzari S.r.l. based in Osteria Grande, ITALY. from Pump Product line

  • Marc - Model G6-220 - Elliptic Rotor Pump for Grapes

    It is ideal for whole and destemmed grapes, with very wide passages (300x200), low rpm (45-57). It guarantees maximum respect of the grapes. It acts by pressure and not by centrifugal force, it ensures the best possible treatment of the pumped product avoiding breaking of the stalks and crushing of the skins and grape pips. It can also be used for ...

    By Strazzari S.r.l. based in Osteria Grande, ITALY. from Pump Product line

  • Mori Tem - Peristaltic Pump

    The peristaltic pump is suitable for the processing of wine, whole, pressed and stalked grapes and marc. Its functioning is based on the rotating rolls pression principle, where, the product is pushed away to the exit by pressing progressively a rubber tube. The alternation between compression and relaxation of the tube allows the continuous flow ...

    By MORI-TEM Srl based in Tavarnelle Val di Pesa (FI), ITALY. from Wine Equipments- Pumps Product line

  • Model G2 - Grapes Trailer eith Elliptical Rotor Pump

    Ideal for the transportation of grapes, driven by the tractor shaft or by an electric gearmotor, it has the advantage of directly unloading into a crusher-stemmer or press, avoiding further passages in the tank. It can also be used in the agri-food sector for semi-solid products such as fruit, citrus fruits and olives.

    By Strazzari S.r.l. based in Osteria Grande, ITALY. from Trailers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you