Showing results for: Grape Stem (Grape Stalks) Equipment
-
Manufactured by C.M.E. s.r.l.based in ITALY
CME produces stainless steel spiral aspirators for the remote transport of ...
-
Manufactured by Zambelli Enotech s.r.l.based in ITALY
Grape stalk aspirators in AISI304 stainless steel for batches of stalks up to 80 tons / h. of grapes. The stalk aspirator is suitable for connection to ø200 mm. PVC piping. This specific construction makes it reversible (DX-SX) while the anchor points are equipped with silent-blocks to minimize the noise and vibrations transmitted. ...
-
Manufactured by MORI-TEM Srlbased in ITALY
MADRINA 50 stalk remover-pressing machine is projected for a soft processing of the grapes; receiving hopper can be supplied with feeding screw or with direct skid to the holed basket. It is equipped with telescopic legs to be fitted into selection lines and with electronic inverter to change RPM. It has double holed stainless steel ...
-
Manufactured by MORI-TEM Srlbased in ITALY
The Delta 30-R stalk remover-pressing machine has been designed particularly for small, top quality wine makers. The machine comprises a hopper for receiving the grapes with an auger for transferring them to stalk removing, which takes place by a beater with adjustable rubber blades. After stalk removal the product falls onto two rubber ...
-
Manufactured by Enomet Impianti S.r.l.based in ITALY
removal to add grapes constantly and uniformly. It is possible to equip it with an electronic speed variator (inverter) in order to immediately modify the forwarding speed of the handled product. TVD2 has the superior vibrating plan with detachable grate with longitudinal openings and is possible to automatically expel stems of leaves, shanks and ...
-
Manufactured by C.M.E. s.r.l.based in ITALY
C.M.E. produces screw elevators and conveyors for wineries. All the plants are made internally and are suitable for any type of material: grapes, marc, stalks, lees and other. We guarantee a turnkey installation service. ...
-
Manufactured by Milani s.r.l.based in ITALY
The ANTARES stalk-stripping and crushing machine was built considering the current requirements of wine producers for softer and more delicate stalk-stripping in order not to break the grapes and, especially, the stalk. Its structure is particularly compact and is easy to install even in tight spaces. It is fitted with an internal washing ...
-
Manufactured by MORI-TEM Srlbased in ITALY
The peristaltic pump is suitable for the processing of wine, whole, pressed and stalked grapes and marc. Its functioning is based on the rotating rolls pression principle, where, the product is pushed away to the exit by pressing progressively a rubber tube. The alternation between compression and relaxation of the tube allows the continuous ...
-
Manufactured by D.V. s.r.l.based in ITALY
Grape stem extractors consisting of a steel runner with radial blades keyed directly onto the motor inside a metal or stainless steel worm screw. All models are powered to suit the quantity of grape stems to extract. DV grape stem extractors comply with current CE safety ...
-
Manufactured by Milani s.r.l.based in ITALY
Pump made of stainless steel AISI 304 for de-stemmed grapes, complete with hopper with safety grille, rotating parts and feed screw stainless steel AISI 304, stator NBR rubber, semiraccordo Garolla DN80 (on request DIN 80), stainless steel trolley with wheels, panel with start / stop commands and control the temperature of the rotor. Thermal ...
-
Manufactured by Della Toffola SpAbased in ITALY
Della Toffola’s NDC crusher destemmers guarantee a perfect, delicate separation of the grapes from the stems, retaining the quality of the crushed grapes in every situation. Conceived and designed to be extremely user-friendly, the standard fittings include solutions that make cleaning procedures quick and ...
-
Manufactured by Winus s.r.l.based in ITALY
Tubular heat exchangers are composed of two concentric tubes in which thermal exchange occurs in counter-current between the product (that flows through the internal pipe) and the refrigerant (that runs through the external ...
-
Manufactured by OMAC enosoluzioni s.r.l.based in ITALY
) is made in stainless steel with round countersunk holes to avoid maceration of the fruit and keeps the grapes stem intact. For difficult grapes is available as option the drum plastic ...
-
Manufactured by PMH Vinicolebased in FRANCE
This equipment is powered by an electric motor and, along with the pump, makes up a versatile pumping unit known as “motopump”. The grapes pump can be used for every type of ...
-
Manufactured by Strazzari S.r.l.based in ITALY
Ideal for marc or for not particularly fluid products, rotor D. 300x150, it is also suitable for the transfer of whole and de-stemmed grapes, with adequate pipes reaching large heads of 10 m. in height or 50. m. in distance. Reclinable stainless steel hopper to obtain smaller height dimensions, it is complete with stainless steel auger ...
-
Manufactured by Strazzari S.r.l.based in ITALY
G6-150 PUMP for grapes end marc. Ideal for marc or for not particularly fluid products, rotor D. 300x150, it is also suitable for the transfer of whole and de-stemmed grapes, with adequate pipes reaching large heads of 10 m. in height or 50. m. in ...
-
Manufactured by PMH Vinicolebased in FRANCE
Our range of conveyor belts for harvesting equipment is made up of a unit designed for the conveyance of a manual or mechanical grapes, whole or de-stemmed, as well as fermented grapes and pomace. Our conveyor belts are easy to use, simple and safe to ...
-
Manufactured by Zhengzhou Taizy Machinery Equipment Co., Ltd.based in CHINA
grape destemmer crusher machinegrape destemmer crusher machine Share This! The grape destemming and crushing machine is an important processing machine in the wine processing industry and the supporting equipment for the homemade wine-making workshop. This grape crushing machine mainly can remove the grape stems ...
-
Manufactured by Strazzari S.r.l.based in ITALY
For the transfer of grapes and marcs and semi-solid products. Ideal for whole and de-stemmed grapes, very wide passages 300x200, hourly production of 250 ql/hour with a low number of revolutions. It acts by pressure and not by centrifugal force, it ensures the best possible treatment of the pumped product avoiding breaking of the ...
-
Manufactured by C.M.E. s.r.l.based in ITALY
The destemmer-crusher is a machine used to process the grapes that arrive in the cellar, both the one picked by hand and the one picked mechanically. The main function is to de-stem the grapes or separate the berries, the good part, from the stalks, or the part of waste. After destemming, the berries pass through the crusher where they are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you