Vine Pruning Downloads

  • BULL - Heavy Duty Rear Mounted Flail Mower for 30 to 70 HP - Brochure

    The grass/pruning shredders BULL thanks to their versatility, they can be used both for the maintenance of green areas (such as parks, airports, motorways etc.), for the chopping of pruning in the vineyards and orchards and for cutting heavy grass and branches on woodlands and wastelands. The use of special high-strength hammers allows fi ne hard pruning ...


    By Peruzzo Srl

  • Berti - Model BF - Mulcher for Vineyard Brochure

    Mulcher for vineyard, suited to mulch grass and pruning up to Ø 3-4 cm. for tractors from 25 to 55 HP. Its extreme low body is ideal to work on vineyards with small ...

  • Berti - Model AF - Mulcher for Vineyard and Orchard Brochure

    Mulcher for vineyard and orchard, suited to mulch grass, bushes and pruning up to Ø 4-5 cm. for tractors from 30 to 60 HP.            ...

  • Single Side Delivery Rakes Brochure

    Used after the pruning for the cleaning of the vine shoots. A brush with manual adjustment of length and inclination, makes this equipment economical and adaptable to any ...

  • Pre-Pruning Machine Brochure

    The machine, that can be used especially on runner-system or guyot type support structures, is made by a tunnel frame on which two cutter bars (double-blades), enable to cut the strongest vine shoots, are applied. The machine has also a particular extractive system for the vine runners enable to carry them to the row centre leaving clean the underlying zone. On choice the vine runners can be both ...

  • Quickpower - Model 1230 - Round Balers Brochure

    Round baler for cut vine branches designed for rows more than 1600 mm wide. A number of optional features are available for model 1230, for ...


    By CAEB International Srl

  • Model S15CD - Flail Shredders Brochure

    183-inch cutting width. Minimum Tractor HP: 90 hp. Three massive tubular beams support the shredder body, for increased strength and reduced vibration. Shredder drive protected by either a 24,000 lbs. inch overrunning disc clutch or a 30,000 lbs. inch overrunning automatic clutch. High capacity gearbox with large oil volume reduces heat buildup and extends bearing and gear life. Specially ...


    By Woods Equipment Company

  • Model RX300 - RX150 - Vine Running Windrowers Brochure

    Machine suitably designed for carrying out operations of after vintage. The Vine running windrowers offers the possibility of picking up runners and pruning waste in only one passage conveying them into the centre of the row. Available in two models, Rx150 with one windrower head or RX300 with two windrower heads, with hydraulic or electric control it allows to manage at best the sarments and ...


    By FAMA - Fabbrica Macchine

  • Model CP100 - PR 650/950 - Pre-Pruning Machine Brochure

    Pre-pruning machine frame mod. CP100. Light and practical, stable on sloping surfaces too. All functions controlled by 5-outlet double-effect hydraulic distributor operating: side movement (40 cm) tilt movement (30°), height adjustment (80 cm). Pre-pruning machine available in two models: PR650 and PR950 for different cutting heights according to the type of vineyards (Guyot or cordon).  ...


    By FAMA - Fabbrica Macchine

  • Bioalcazar - Vine Shoot Mulcher Brochure

    The Bioalcazar Vine Shoot Mulcher with large capacity, hydraulically operated catcher is specially designed to shred all kinds of vine shoots and operates with the tractor in forward drive. Its pick-up feeder passes the vine shoots into the shredding chamber while preventing the entry of any stones. Its sieve ensures fine and uniform shredding. The shredded material is sent to the ...


    By Picursa

  • Model CRS - Pruning Kit Brochure

    The pruning kit CRS is used for pre-pruning of the vineyard trellis. The kit consists of one horizontal bar with nylon wheels, gas spring for automatic in and out and hydraulic movement to avoid the posts plus one or two bars optional. These bars work between the wires of the row and cut all the branches. The kit can be applied on every frame B1, B1 SB and turning ...


    By Rinieri S.r.l.

  • Model CPS and CPL - Double Barrel Winter Trimming Machine Brochure

    Double barrel winter trimming machine for cutting the branches in cordon vineyards. Pre-pruner and remover vine canes CPS, suitable for  all varieties of vineyards, essential for cost containment of vineyard management.  To the operator is left only the finishing touch of occasional clearing of the wires as most of the canes are removed from the wires, therefore reducing the pruning ...


    By Rinieri S.r.l.

  • Model DRV - Leaf Remover Brochure

    The DRV leaf remover is ideal for removing the leaves in the area of production in traditional vineyards unprepared to the use of double barrel defoliator. In fact, the cutting blade placed in front of the fan ensures a clean cut of the shoots aspirated. The stainless steel shield is made of  a special shape to be in contact with the row without causing damage to the grapes and it is ...


    By Rinieri S.r.l.

  • Model DRF - Double Barrel Leaves Remover Brochure

    The new double barrel leaf remover DRF is the answer to the needs of the modern vineyards. The machine removes the leaves from the grape zone, that increases maturation and aeration reducing spraying chemicals. The machine consists in two opposite rollers, one with holes and the other with rubber, which allow a perfect and safe removal of the leaves without damaging the grapes thanks also to the ...


    By Rinieri S.r.l.

  • Leaf Trimmer Brochure

    Leaf trimmer is being produced and distributed as single side , double side as well as over row, walking stick and custom made vine trimmers. For our Vine Trimmers we use exclusively premium grade materials in order to guarantee highest stability and durability. All our machines are equipped with solid frames which are reinforced with polished stainless steel sheet ...

  • Model 111 VRT - Leaf Stripper- Brochure

    The 111 VRT leaf-stripper has been devised to enable controlled working in the vineyard, not removing leaves in a uniform way, as with all the previous equipment, but controlled depending on the higher or lower presence of vegetation in different parts of the same vineyard. The process we are putting forward uses a telemeasuring system to create index maps of vegetation, to be used as a guide to ...

  • Model VK 95 - 115 - 135 and 155 - Multi Purpose Mulchers- Brochure

    Multi-purpose mulchers with interchangeable knives particularly suitable for crushing vine-shoots, kiwi-cuttings, grass and pruning residues. The mulchers VK 95 - 115 - 135 and 155 are provided with adjustable coupling and gearbox with overrunning clutch. Thanks to their low power requirement and compact size, these machines can be used also under the heaviest working conditions. Working widths: ...


    By Nobili S.p.A.

  • Model EB 490 - Overrow Leaf Remover Brochure

    With the overrow Leaf remover, a complete row of vines can be stripped in a single operation. It is no longer necessary to drive along vine rows without ground cover under unfavourable weather conditions. The unit can be adapted to different thicknesses of foliage just by using the hydraulic ...


    By Binger Seilzug GmbH & Co. KG

  • Garden Stakes Bamboo style

    Bamboo Stakes Foiled Of Orchid Support Applies: these garden bamboo stakes are used for orchids plant support,and other vine plant supports in the garden and greenhouse. Material: natural bamboo material, clear plastic foiled Quality: * dryness less than 12%; * strictly mildew proof ; * finish smooth, no burrs or black knots ; * pvc foiled protection, longer ...

  • Model TRDH - Hammer Crusher Brochure

    Hammer crusher with hydraulic lifting up to 45 cm. Used to work clearing weeds, pruning vines vineyards and orchards in general. The hydraulic displacement (max. 45 cm.) Allows operation in normal or off-center position, approach to work in plantations, orchards, etc.. The machine has supports three points and is applicable to any tractor wheels or caterpillar either. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you