Vineyard Productivity (Vineyard Management) Equipment
-
Manufactured by ERO GmbHbased in GERMANY
In trials independent institutes have demonstrated that systematic defoliation of the grape zone is a decisive factor in improving wine quality. Because ERO Defoliators work on the 'suck and cut' principle, when fitted with a grille with 9 bars (70 mm bar spacing), they can be used for thinning inflorescences. When a top cutter is also fitted, the first trimming operation can be carried out at ...
-
Manufactured by ERO GmbHbased in GERMANY
When the Post Pounder is placed on a post, two concentric weights inside it are set in motion. The post is driven into the ground by a succession of small blows. The weights of the standard ERO Post Pounder are 60 kg, and the heavy-duty version has 90 kg ...
-
Manufactured by ERO GmbHbased in GERMANY
The two contra-rotating rollers of an ERO Leaf Stripper pluck leaves gently from the vines. The valuable grapes remain unharmed. These Leaf Strippers can be used at any time between flowering and harvesting. The parallelogram function, included in the standard equipment, holds the leaf-stripping head so that it is ideally positioned in relation to the foliage at all times. This applies both ...
-
Manufactured by Klimabased in NEW ZEALAND
KLIMA Sureflex vineyard springs have been developed as a joint effort joint between KLIMA, Strainrite Fencing Systems and Lincoln University. Our goal was to develop a product specifically for our customers using the KLIMA pruning system. We wanted a way to allow the driver the safely pick up the fruiting wires much closer to the end assembly ...
-
Manufactured by Klimabased in NEW ZEALAND
KLIMA recommends Strainrite Crimps and Crimping tools for joining your wires when using the KLIMA pruning ...
-
Manufactured by Klimabased in NEW ZEALAND
Since 2009, NZ Tube Mills product development engineers have worked closely with winegrowers and viticulturists to develop ECO TRELLIS® steel posts and wire clips. Their research involved intensive testing of steel posts used in New Zealand vineyards to analyse success and failure rates in extreme weather conditions and thus determine a ...
-
Manufactured by GreenTech Australianbased in AUSTRALIA
This is the first 2 row tow behind that GreenTech developed. We've sold several hundreds of this great product for vineyard spraying in Australia, NZ and USA. It is available in both 2000L and 4000L tank ...
-
Manufactured by Agrimasterbased in ITALY
Light shredders, suitable for low-potency small tractors, ideal for parks , gardens, sport courses, public green areas and for vineyards ...
-
Manufactured by Industrias Belafer S.L.based in SPAIN
Brush for fruit trees and ...
-
Manufactured by Serena Groupbased in FRANCE
Fast and easy system of a fixation! Rubber bands with anchors are ideal for the production of cable harnesses or the fixing of labels. Black rubber bands with an anchor are specially designed for use in agriculture and vineyards. ...
-
Manufactured by Ben Wye Engineering Pty Ltdbased in AUSTRALIA
. Full length stainless steel hinge pins for ultimate strength and longevity. Come standard with 2 rear and 3 front rollers to follow ground contours of V-Shaped vineyards or ...
-
Manufactured by FA.MA. Pruning System Srlbased in ITALY
Vine shoot tipping machine with two functions. Vine shoot tipping machine with exchangeable roll with nylon wire available in two versions: from 6 to 8 mm, perfect for weeding among the vineyards rows. The rolls are composed by our special rubber bands made of an anti-usury material which guarantee a perfect cleaning of vineyard ...
-
Manufactured by Spagnolo Engineeringbased in AUSTRALIA
Introducing to Australia this coming season in 2018, The Vine Sucker Remover has proven success in the United States of America. It is environmentally friendly and cuts down on the use of chemicals in your ...
-
Manufactured by Car-Gar, S.L.based in SPAIN
Vineyard pre-pruner at the back. Minimum hydraulic flow of 30 L/min. Attachable to tractors through front end frame. Cutting discs that ensure a clean pruning near the rope; they are located on the lower part of the axis. Telescopic chassis that allows machine configuration for desired height and ...
-
Manufactured by ERMO S.p.A.based in ITALY
The product range that suits every tractor. ERMO products meet any need, with regard to both light tasks carried out with low-power tractors (45hp), and to in-depth works or trenching activities carried out with tractors (up to 500hp) in order to implant new vineyards and ...
-
Manufactured by Van Wamel B.V.based in NETHERLANDS
Our KP Series flail toppers are specially designed for topping pastures, green spaces, parks, camping sites, vineyards ...
-
Manufactured by Berti Macchine Agricole S.p.A.based in ITALY
Mulcher for vineyard, suited to mulch grass and pruning up to Ø 3-4 cm. for tractors from 25 to 55 HP. Its extreme low body is ideal to work on vineyards with small ...
-
Manufactured by Binger Seilzug GmbH & Co. KGbased in GERMANY
The two-sided EB 490 Leaf Remover with hydraulic width adjustment as standard can operate in rows from 1.20 m to 2.40 m wide. The optional hydraulic height adjustment provides separate control of the height of each stripping head. This enables its use in terraced ...
-
Manufactured by Olmi Srlbased in ITALY
PNEUMATIC DELEAFER mounted on the back of the tractor on the 3-point hitching, 1 blowing head, cardan, 4 movements with electro-hydraulic joystick, in order TO WORK ON PERGOLA VINEYARDS. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you