Only show results available in Virginia? Ok

Slurry Handling equipment for Agriculture Management

  • Premium

    Spinning & Dished Ends

    Spinnings/Dished Ends are used in the agricultural industry to manufacture slurry tankers and in the oil industry for Overground and Underground oil tanks.

    By Kingspan Environmental Ltd based in Co. Armagh, NORTHERN IRELAND. from Spinning & Dished Ends Product line

  • Conor - Standard Tankers

    The standard range of slurry tanks come in 1100 gallon to 2100 gallon. They come mounted on a rigid drawbar and heavy duty ADR axle with a range of wheel options. Wheel options include 385/65 R22.5, 425/65 R22.5, 1300 x 530 x 508 BN3 and 21.3 R24. The high quality 8000 litre Battioni vacuum pump comes as standard with a secondary trap (with drain ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • Conor - Tandem Axle Tankers

    Conor tandem axle tanks are designed and built with strength and safety in mind. The unique chassis design and tandem parabolic suspension keeps the overall height low and gives excellent stability. The high speed parabolic suspension and strong chassis are ideal for travelling at high speed. A large range of wheel options are available to choose ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • Conor - Fully Recessed Tankers

    The Conor range of fully recessed LGP tankers are strong and robust and built with the contractor and large producer in mind. Sizes range from 1600 Gallon up to 3000 Gallon and comes with many features as standard such as large 30” rear door, 11000 litre vacuum pump, 20 foot suction hose, full commercial axles with 420 x 180 brakes, LED road ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • Conor - Slootsmid Trailing Shoe

    The Conor Slootsmid Trailing shoe system has been developed with a robust and practical design to operate in all types of terrain. The tank, the trailing shoe and the axle are integrated as closely as possible which gives excellent balance and maneuverability. The trailing shoe has a fully galvanized body and a powerful hydraulic macerator which ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • Conor - Economy Trailing Shoe

    The Conor Economy Trailing shoe system has been developed with a robust and practical design to operate in all types of terrain. It has a simple lightweight design and is designed very close to rear of tank and can fit on any tank. It allows for the even application of slurry which contributes to even growth. It greatly increases grass yield in ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • Model 1000/600 - Slurry Separator

    The Euro-P separator (slurry separator) meets even the highest requirements, manufactured in full stainless steel design with high durability of all parts in contact with the slurry.The sophisticated rugged design allows for applications in demanding and challenging operating conditions at industrial and agricultural sites.The compact device 'Type ...

    By Euro-P Kleindienst GmbH based in Bad Schwartau, GERMANY. from Slurry Separator Product line

  • Model 4000L - Slurry Tanks

    The slurry tanke type T 507 / 3 at capacity 4000 liters is a completely equipped machine ready to work. It doesn’t need any additional equipment to work. The vehicle is available in four versions: MINIMUM, STANDARD, CLASSIC and PREMIUM. MINIMUM version has a compressor at capacity 3000 L / min, and a pouring spoon with the splash plate. It ...

    By Pomot Ltd based in Chojna, POLAND. from Slurry Tanks Product line

  • Agronic - Slurry Tanker

    Agronic slurry tankers are made for professional users. Thanks to the unique chassis and tank design the centre of gravity is very low.This make the machine very stable when spreading on hilly ground. Ground clearance is still 40 cm (15.75”)..Placing the tank in front of the axles ensures that there is always sufficient weight on the ...

    By Agronic Oy based in Haapavesi, FINLAND. from Slurry Tankers Product line

  • ProSonix - Model C-Series PSX - Starch Jet Cooker

    Co-axial Jet Cooker design assures optimized starch slurry heating & complete starch cook-out. Unique PSX Jet Cooker drive system assures concentric slurry gap. Adjustable starch slurry gap for variable pressure drop control. High gear drive turndown allows for repeatable performance. Precise temperature control of +/- 1 deg F. Integral ...

    By ProSonix LLC based in West Allis, WISCONSIN (USA). from Starch Jet Cooker Product line

  • Slurry Tankers

    All our Slurry tankers are manufactured using 6mm high quality steel. Internal implosion rings are fitted to all tanks and fitting to an 8mm full length chassis ensuring maximum support and balance. This enables spreading systems to be mounted to the Tank while maintaining the stability of the tank. ? All fitting on the Tanker are galvanized ...

    By GH Engineering based in Castlederg, NORTHERN IRELAND.

  • ECOFUSION - Gas Holder Tanks

    ECOFUSION is the agricultural contact surface finish which delivers a low cost functional solution for the storage of farming products, including animal slurry.  The ECOFUSION® solution is established as the product of choice for the agricultural market place.

    By Permastore Limited based in Suffolk, UNITED KINGDOM.

  • Pompe Ferrari - Model SC Series - Slurry Tank Decompressors

    Besides the slurry tank decompressors development, these alternative sliding vane compressors are suitably employed for the self-propelled sprinkler pipe emptying. On request, it could be outfit of high thermal resistance vanes. A oil-bath twin-gear multiplier increases the rotary motion of the motor power takeoff (PTO 540 RPM). Automatic standard ...

    By Pompe Ferrari s.n.c. based in Novellara (RE), ITALY. from Compressors/Decompressors Product line

  • Model T Series - Slurry Tankers

    All KIRCHNER slurry tankers can be delivered with vacuum-pump, worm type pump, rotary-piston pump or vacuum-centrifugal pump. All tanks are produced in the own work Anzenhof, outside and inside hot galvanized and protected with a colorless coating outside. Construction tankers for all usual means of transporter types or for the assembly on trucks ...

    By KIRCHNER & SÖHNE GMBH based in Statzendorf, AUSTRIA. from Slurry Technology Product line

  • Tri Axles Slurry Tanker

    The capacity of the tri-axle solutions ranges from 18,500 to 30,000l. These tankers are intended specially for groups of farmers, large farms and contractors. The choice of this type of equipment is determined by two criteria: a large volume of slurry to be transported and a certain distance to be covered between the filling and spreading points.

    By PICHON S.A. based in Guipavas, FRANCE. from Slurry Tankers Product line

  • Single Axle Slurry Tanker

    This range is designed for users who do not require a large tank capacity. This type of equipment is selected according to two main criteria: short distances (0 to 6km) between the filling and spreading points and a moderate volume of effluents to be used.

    By PICHON S.A. based in Guipavas, FRANCE. from Slurry Tankers Product line

  • GARANT - Model PT 18.500 Poly - Two-axle Slurry Tankers

    Drawbar suspension, lower hitch with ball button system Scharmüller with a nose weight of 3 t.Rotary piston pump Vogelsang with rotacut 10000 (optional).Parabolic suspension or air suspension in conjunction with original BPW axles up to 60 km/h.Heart-shaped tank up of polyester, support with big wheel salient.Dead load with rotary piston pump ...

    By Kotte Landtechnik GmbH & Co. KG based in Rieste, GERMANY. from Slurry Technology Product line

  • Slurry Tankers and Umbilical Slurry Systems

    With numerous awards for Innovation, our sister company SlurryKat are now seen as the world technical leaders when it comes to Umbilical Slurry Handling Systems and Slurry Tankers. SlurryKat's unique full length laser cut and press formed tapered chassis system provides a unique state of equilibrium, that is unseen in any other slurry tanker, ...

    By SK Agri based in Craigavon, NORTHERN IRELAND.

  • Herbst Tankers

    Herbst Slurry Tankers available ex stock, phone for details.

    By Redlynch Agri Eng LTD based in Somerset, UNITED KINGDOM. from Tankers Product line

  • Samson Agro - Model PG 15 - Slurry Tanker

    The slurry tanker can be adjusted according to individual needs, because SAMSON’s full product line includes a series of accessories and extra equipment. SAMSON manufactures different drip hose systems with a working width of 12-30 m, injectors for grain and grass or black soil. This ensures a product with a perfect cooperation between the ...

    By Samson Agro A/S based in Viborg, GERMANY. from PG/PGII/PGV/SG Series Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you