How to build a fish pond
Whether in the construction of fish pond projects or individual fish pond construction and construction of fish ponds, you can completely customize the fish pond design.
The following step-by-step guide highlights the fish pond planning process. This includes considerations in the selection of sites and plants, as well as the selection and maintenance of fish. It will also provide a basic overview of how to build a fish pond.
Step1:Choose a good place for the fish pond. Generally speaking, there is no certain distance from the high deciduous trees to prevent the leaves from falling into the pool, which is not good to clean up; Production practice shows that the pond area is better at 6670 square meters. If the pond is too large, throwing feed easy to causes uneven fish intake, water quality is not easy to control. The depth of the pool is generally 2.5~3 meters. Fish ponds are generally made into rectangles long from east to west and wide from north to south, and the ratio of length to width is about 5:3. This has the advantages of small shade and longer illumination time. The bottom of the pond should be shaped like a turtle's back, sloping toward the outlet for drainage and fishing, and the surrounding area should be open enough to plant forage grass, but no trees.
Step2:Choose the place where the sun shines 4-6 hours a day is more appropriate;
Step3:With lime or flour, draw the shape and size of the pool, along with the shape of the painted pool, outward about 30 cm, dig out the first layer of shallow water; Shallow water is usually about 50 to 60 centimeters deep.
Step4:With lime or flour, draw the pool of deep water, along the shape of the drawing to dig out the deepwater area. The deepwater area is usually between 1.5m and 1.8m.
Step5:Make a fence out of wood or stone at the edge of the shallow water area. (Fixed the role of waterproof PVC to prevent pond collapse)
Step6:Use the rope along the bottom of the pool, measure the length and width of the geotextile and waterproof HDPE geomembrane and the geotextile
Step7:Cut out the geotextile and waterproof HDPE geomembrane as the size you measure
Step8:Put on the geotextile. The function of the geotextile is to prevent the hard things at the bottom of the pool from cutting the waterproof HDPE geomembrane. and also the geotextile has the function of resisting corrosion,anti-aging, isolation, drainage, protection, and enhancement
Step9:Spread waterproof HDPE geomembrane liner. In the deepwater area, place a good pump, deep water plants, decorative stones, etc. Release water in deep water area. (The pump should choose a good quality brand, such as OASE, from the late frequent replacement, maintenance, and other troublesome things)
HDPE fish pond geomembrane has a great good anti-seepage effect. Due to its low permeability coefficient, HDPE Geomembrane has good water storage performance.HDPE Geomembrane can not only save water resources for fish ponds but also stabilize the water quality to maintain the balance of the water surface.HDPE geomembrane ponds can also ensure the oxygen content in fishponds, blocking the oxygen into the soil to make the fish fat. HDPE geomembrane can avoid desilting, improve the breeding cycle and increase breeding efficiency.HDPE Geomembrane also can prevent diseases and insect pests and block soil bacteria and germs.
All in all, with geomembrane liner, can not only improve the breeding efficiency but also can be easier to change the water and clean up the fish pond
Step10:In the fence and the edge of the pool, pour soil and another filling.
Place plants in shallow water. Tape plants in sloping areas.
Step11:Along the pool, you can make decorative stones, artificial hill, and grass if you want
Step12:Install filters, water suction pump.
Ready to get started? Contact us for free training on fish pond construction you need.
-
Most popular related searches
Customer comments
No comments were found for How to build a fish pond. Be the first to comment!