Ride On Mowers Online

How To Compare Commercial Ride On Mowers

- By:

Courtesy of Ride On Mowers Online

There are plenty of professions that would require the use of a commercial ride on mower – perhaps you work for a gardening or landscaping company that looks after private properties or perhaps you work for a council and are in charge of maintaining local parks. For whatever reason, choosing an appropriate mower for your needs should be your main focus otherwise you are setting yourself up to fail. We have covered 5 areas that you should look at when it comes to comparing models.

Step 1 – Cutting Deck Widths

It is important to keep in mind that a commercial mower will have a much wider cutting deck than a residential model. This measurement will correlate directly to the size of the cutting blades – the longer the blades, the more grass you are able to cut at one time. You should be looking for a deck width of 36 to 52 inches for smaller areas and 64 to 72 inches for larger areas (or if you regularly need to cut through weeds and thicker brush).

Step 2 – Capabilities

You can then move onto the capabilities of the mower, such as: manual push, standing ride or sitting ride. A standing model will offer you high speeds and wide cutting paths, whereas a sitting one will offer you the same high speeds but will help to reduce fatigue. Manual push models work best for areas that do not feature level ground, which has been known to unbalance and even overturn many a lawnmower (resulting in accidents and injury).

Step 3 – Turning Radius

If at all possible, you should look for ride on mowers with a zero turn radius, which will allow you to rotate the machine at zero degree angles and maneouvre in tight corners. If you cannot find a model that is suitable and are forced to buy a standard one, however, make sure that you look for a 20 to 30 inch turning diameter to ensure that it can still navigate tight spaces okay. This will lessen the need to reverse and turn around continuously whilst mowing.

Step 4 – Maintenance Requirements

Before purchasing, it is important to consider the maintenance requirements of that particular mower. These include: oil changes, air filters, blade sharpening and tyre inflation. Oil changes and air filter checks should occur after every 25 to 50 hours of use, whereas the gaps between blade sharpening will depend on the type of lawn or brush that you are cutting. It is possible to undertake these tasks yourself or have a professional do it for you.

Step 5 – Prices

In many eyes, this is the most important comparison to make when choosing a commercial mower. This is because most people are working within certain budgets and can only afford so much. Ride on models can range anywhere between $5,000 and $11,000 depending on the brand and the features that you are looking at. If you cannot afford to spend this much, it is also possible to pick up a suitable second hand model that meets your needs.

When it comes to comparing commercial ride on mowers, it is important that you have taken each of the above points into account to ensure that you are getting the most accurate overview. Just keep in mind that not all models are created equally and that, ultimately, you will get what you pay for. This does not mean that, if you don’t have a lot of cash to spare, that you will be stuck with a lemon that doesn’t work – just make sure that you shop smart and you will go home with the perfect purchase.

Customer comments

No comments were found for How To Compare Commercial Ride On Mowers. Be the first to comment!