Sheep manure organic fertilizer production line:
First. Mix the sheep manure with the crop straw. The amount of the sheep manure depends on how much the water content of the sheep manure is determined. According to the fermentation process, the water content is required to be within 45%, that is, the material is kneaded into a mass, and the water can be seen. Will not drip down, loosen the group will spread out. Then, the cornmeal and the required strains are added. The reason for the cornmeal is that the sugar content can be increased to promote the rapid fermentation of the strain.
Second, the configured materials are added to the material mixer for mixing, and the mixing is required to be uniform and transparent, and no raw blocks are left.
Third, the mixed materials are piled in a fermentation tank or grooves with a width of 2 to 6 meters and a height of 1.0 meters to 1.5 meters, and are repeatedly turned over and thrown every other day using a compost turning machine.
Four, under normal circumstances, in the fermentation tank, the temperature will rise after stacking for 2 days, and it will be odorless after 2 days. After 3 days, it will become fluffy and loose. After 2 days, compost will emit fragrance, 15 days, it can be fat.
1. In the fermentation tank for 2 days, the temperature will rise to 60 ° C to 80 ° C, which will kill bacteria and remove insects.
2. On the fourth day in the fermentation tank, the odor is eliminated; then on the seventh day, the material in the tank will become loose, dry and covered with white hyphae.
3, fermented in the pool to the ninth day, the nine will emit a fragrance, basically similar to the koji.
4. Fermentation to the tenth day in the tank, the material will be fermented and cooked, and sufficient.
5. On behalf of the end of the fermentation stage, the material can be removed to the next step with a forklift or the like.
Five. The material moved by the forklift to the pulverizing process is pulverized by a semi-wet and high-humidity material pulverizer, and then mixed by a mixer machine, transported to fertilizer granulator machine by a conveyor, and granulated into granules, It is sent to the dryer by the belt conveyor, dried and dried, and then cooled into the cooler. Then the conveyor is sent to the screening machine for screening. The required particles of more than 95% will enter the next process, and about 5%. The granules are transported to the pulverizer for re-pulverization and granulation, and the granules that meet the standards are fed into the coating machine for coating. The coating can maintain the nutrients, and after coating, it is packaged by an automatic packaging machine. In this way, the sheep manure organic fertilizer is processed and packaged and can be sold in the warehouse.