Ways to pick a drifting fish feed machine
Recently, with the rapid advancement of the economy, the floating fish feed machine has followed closely, and also the fish feed pellet maker has been sought after by everyone. After that there is a problem, that is, exactly how to select the floating fish feed machine Allow's analyze the 3 approaches of selecting a fish feed pellet maker.
1. Techniques to select a floating fish feed equipment.
( 1) Look high quality.
The spray paint externally of the covering of the drifting fish feed machine must be uniform as well as company, and also there must be no paint leak, sagging and also falling off. The chrome-plated components must be firm and also brightly sleek, without peeling off and also rust. Stainless-steel parts need to have a smooth surface, no bumps, as well as should be processed with neat refined patterns.
( 2) Setting up and fastening
Along with inspecting the attachment of the body as well as the chassis, the motor (or diesel engine) as well as the framework, the floating fish feed machine primarily examines the assembly high quality of the theme securing nut and the pellet cutter, as well as the ring die floating fish feed machine mainly checks Whether the attaching screws of the theme are tightened up. As well as check the tightness of the pinch roller brace as well as squeeze roller.
Related post: fish feed plant
( 3) Change the gap in between the die and also the stress roller wall surface.
2 layers of paper are packed in between the pressure roller and the internal wall surface of the ring pass away, as well as it can be pulled out with a little force. After modification, be sure to tighten up the changing nut in time and set up the safety cover.
After confirming that there are no foreign items in the guard and the ring pass away, transform the ring die by hand. At this time, the driven pin should revolve briskly, as well as there is no sticking sensation or massaging sound.
2. Notes:
Directly observe whether there is beating of the drifting fish feed machine ring pass away during turning and also whether it will certainly scrub versus various other components. Open up the observation port for feeding the powder right into the turning cage and inspect whether there is any contaminant in the twisting cage.
Related post: Shrimp Feed Pellet Machine
Rotate the cage shaft by hand, the cage shaft should turn smoothly and there is no rubbing noise. Repetitively open and also close the ring-molded stockroom door to check whether it is simple to open up as well as shut as well as firmly shut.
Certain focus must be paid to inspecting the tightness of the joint and the integrity of the securing. The general requirements are: exact placing, firm locking, and no leakage of powder.
After securing the press chamber door, observe the joint seal of the chamber door from the side. If there is a area where the seal is not tight, the fixing bolts of the door joint of the storehouse can be adapted to efficiently prevent the leakage of powder.
3. Introduction of floating fish feed equipment
The drifting feed extruder maker is a feed handling maker that directly presses pellets from smashed products such as corn, soybean meal, straw, grass, rice husk, and so on( 1) Classification of drifting fish feed pellet maker
floating fish feed equipment can be split right into ring die pellet equipment, ring pass away pellet device and also counter-roll pellet equipment; according to production, it can be divided into: straw feed pellet device, wheat bran feed pellet equipment, soybean dish feed pellet equipment, corn straw feed pellet device, Sawdust feed pellet machine, and so on.
A variety of various floating fish feed machines are categorized according to their appearance and also production methods.
( 2) Key efficiency features of floating fish feed machine
- Double shaft differential stainless-steel conditioner, approximately 12 factors of vapor and also 6 factors of liquid enhancement;
- Incorporated pin, easy to keep as well as fix the bearing housing;
- The screw and also the major shaft are connected by involute splines, which are simple to adjust as well as change;
- The barrel is embedded with a wear-resistant bushing and is equipped with a return water network, which can be heated/cooled, and also can also directly inject vapor or cold water right into the barrel;
- Spiral constructed from unique wear-resistant material, huge element ratio can make sure constant and also steady manufacturing of sinking/floating feed of different pellet sizes;
- Convenient and also quick die substitute mechanism as well as online adjustable cutting tool;
- Particularly ideal for the manufacturing of 2 ~ 6mm drifting pellets.
More details: https://www.pellet-richi.com/fish-feed-extruder/floating-fish-feed-machine.html
After the material is extruded by the floating fish feed device, it will create soft and soft pellets (the dampness material is 25%~ 30%). At this time, it is better to utilize pneumatically-driven sharing instead of lift.
Because the use of elevators can conveniently create the pellets to be broken as well as boost the pulverization price; the use of pneumatically-driven sharing can not just rapidly form a layer of colloidal coating externally of the pellets to reduce the fragmentation of the pellets, but additionally round the shape of the pellets.
Because of its high moisture web content, the product communicated by pneumatically-driven must enter the dryer for drying out, to make sure that the moisture material of the product is lowered to regarding 13%.
I really hope the above relevant web content about floating fish feed equipment is handy to you. For additional information concerning floating fish feed pellets maker, you rate to consult the staff of Richi Machinery, we will certainly serve you totally!
For more details: Richi Machinery
Email Address: enquiry@pellet-richi.com
Phone/Whatsapp: 0086-13838389622
Customer comments
No comments were found for Ways to pick a drifting fish feed machine. Be the first to comment!