Access Irrigation Ltd products

Fill the Static Dilutor bottle with liquid feed, select the appropriate jet and connect to the water supply. As water passes through the dilutor head it draws up a ratio of liquid feed which mixes with the water. Designed to be filled, put near the tap, and then not moved until it is emptied. Max operating pressure 2.5 bar.

The Mobile Dilutor gives extra versatility. The liquid feed is kept inside an inner bag. This has a number of advantages, the unit need only be part filled, it can be moved from tap to tap without disturbing the final dilution rate and it can be left part-filled overnight. A wider range of chemicals including those of a similar density to water can be used. The bottle will withstand 4.0 bar pressure and is manufactured from heavy duty polythene.

The Ottima PC360 is a pressure compensated dripper making it ideal for larger pots and planters where more water is required. The Ottima sprays over a wider diameter than a traditional dripper, reducing water run-through on hanging baskets.

This low cost watering system is ideal for watering large areas economically. Each stake set includes a riser pipe, fittings,
sprinkler and straps to fit to the customers own stake (25mm square is ideal). The medium kit will water an area up to 100m 2 (25m x 4m). Requires 3mm punch

Designed for row crops in tunnels each dripper is just 20cm apart. This low cost, thin wall system is ideal for flower crops and vegetable production.

The controller features 3 easy to use dials. The ‘valve on’ dial allows the burst length to be set. The ‘delay’ dial can either be set to ‘off’, in which case the mist will burst every time the wet leaf dries out, or it can be set to a minimum delay to allow for weaning. Finally the ‘sensitivity’ dial adjusts the sensitivity of the wet leaf.