7 products found
Agri World srl Products
-
Agricultural Machines
-
Model FPR-15/25 - Agriculture Soil Rock Cutter
The FPR-15/25 are machines for milling directly fixed and emerging rocks in any agricultural ground with stones of any kind and bushes, to be reclaimed for different type of growing (wineyard, orchard, vegetable and so on), without preliminary working. The working depth is 150 mm for the FPR-15 and 250 mm for the FPR-25, the power may vary according to the working width from 70 up to 300 HP. To operate with the FPR-15/25, the tractor must be supplied ...
-
Model FPR-35 - Agriculture Soil Rock Cutter
The FPR-35 are machines for milling directly fixed and emerging rocks in any agricultural ground with stones of any kind and bushes, grass, to be reclaimed for different type of growing (wineyard, orchard, vegetable and so on), without preliminary working. The working depth is 350 mm, the power may vary according to the working width from 280 up to 400 HP. To get a depth up to 700 mm you may require the FPRDM wich is equipped with an auxiliary engine ...
-
Vineyard Orchard Stones Crusher
The crush any kind of stones at a depth from 100 mm up to 400 mm, for valuable culture especially vineyard and orchard. The forwarding speed of the stones crushers is 300/900 m/h at 2000/2200 rpm engine then the tractors must be supplied with the creep gear or vario gear. To get the maximum output by the fs you have to bring up the ground the stones (tilling the fields with a tiller tip) or to collect the stones with a windrower asl and to crush the ...
-
Stone Windrower
The stone windrower is an impliment able to collect stones (from 40 to 500 mm diameter) which are on the ground, making rows spaced about m 6/8 each other, according to the asl width, saving time and working cost. Before using the asl it’s suitable to make some pass with the tiller (tip) in order to have the stones out on the ground as much as possible. The asl is coupled to the three point hitch and it’s provided with wheels, drive shaft ...
-
Forest Brush Cutter
The Forestry Brush Cutter is a machine suitable for job of various kinds: underwood cuttings, creation of paths and traks for prompt intervention and maintenance of the woods, preparation and restoration of new wood-land, creation of filling station and passages for gas-pipeline, acqueduct and so on, creation of golf-courses, crushing of rubbish in order to reduce the volume. The Forestry Brush Cutter has a back chest to knock down the trees adjustable ...
-
Model VT2 - Vibrotiller
The Vibrotiller mod. VT2 have two tines rows and they are used for superficial working of the ground. The space among the tines is 220 ...
-
Industrial Machines
-
Disk Digger
The SCD are used for making canals in any type of ground, even in presence of rocks. The principal activities carried out with the SCD are: canalization for irrigation pipes, cables, drains, digging to plant vineyard, orchard and so on. It's made up by a disk digger with interchangeable theeth (having widia point). The working speed in the ground (without rocks) it is about 300 m/h, in the rocky ground it must be from 40 to 100 m/h, so the tractor must ...