10 products found

AirOxi Tube products

AirOxi Tube - High-Efficiency Tube

Detailed explanation of Flow parameters; Air Flow – Depends on blower size and output. At 2 PSI pressure and 1 mtr water head, Average flow rate per mtr is approximately 500 ltrs/ hour (0.5 m3 / hr). However since bursting is not a concern, the air flow can increase as high as required by increasing blower and motor size. This is not however useful for aeration purpose since the flow will be too high to have any meaningful dissolution of air. Bubble size – varies with depth of installation and blower pressure. At 1.5 mtr depth, bubble size at exit of tube is less than 1 mm, at a pressure of 2.0 PSI. However it will change depending on salinity, air flow from blower, pressure, water depth, etc.

AirOxi Tube - Algae Resistant Tube

Air Flow – Depends on blower size and output. At 2 PSI pressure and 1 mtr water head, Average flow rate per mtr is approximately 500 ltrs/ hour (0.5 m3 / hr). However since bursting is not a concern, the air flow can increase as high as required by increasing blower and motor size. This is not however useful for aeration purpose since the flow will be too high to have any meaningful dissolution of air. Bubble size – varies with depth of installation and blower pressure. At 1.5 mtr depth, bubble size at exit of tube is less than 1 mm, at a pressure of 2.0 PSI. However it will change depending on salinity, air flow from blower, pressure, water depth, etc.

AirOxi Tube - High-Flow Tube

Air Flow – Depends on blower size and output. At 2 PSI pressure and 1 mtr water head, Average flow rate per mtr is approximately 800 ltrs/ hour (0.8 m3 / hr). However since bursting is not a concern, the air flow can increase as high as required by increasing blower and motor size. This is not however useful for aeration purpose since the flow will be too high to have any meaningful dissolution of air.

AirOxi Tube - Tube and Disc Diffusers

AirOxi offers Tube and Disc diffusers especially for use in hatcheries and indoor nurseries, RAS systems, and portable HDPE tanks. These high-efficiency diffusers work at high pressure and create microbubbles, offering good SOTR.

AirOxi Tube - Tube -Ceramic Plate Diffuser

Ceramic Plate Diffuser is an extremely fine bubble diffuser and is often referred to as a Nano-bubble diffuser. It is made of a ceramic plate with very small micro holes, not even easily visible to the naked eye. It is easy to clean. Because it is made of ceramic, very few substances can actually stick to it and those that do, can be wiped off easily or scrubbed with a nylon brush. Their high oxygen transfer characteristic makes them ideal for use in hatcheries and RAS systems. Aerating the reservoir is also an efficient way to add Dissolved Oxygen (DO) to the system

AirOxi Tube - Directional Flow Grid

AirOxi Tubes is made from a special blend of polymers and additives to give it micro holes. AirOxi Tube is RoHS certified. The micro holes are made to perfection with the special formulation, to ensure small bubble size and high Standard Oxygen Transfer Rate (SOTR) and high Standard Aeration Efficiency (SAE). As a result, the increase in DO is three times faster, and that too with less than half the power used in traditional paddle aerators.

AirOxi Tube - Floating Diffuser Grid

10 lines of Aeration tube in 1 grid, with 0.5 HP blower. Ready to use Aeration Grid with floats, specially designed for immediate use. Just connect to power supply and it starts highly efficient aeration.

AirOxi Tube - Aquacombo Meter

The Aquacombo meter is the ideal measuring instrument for all grow out ponds and nurseries. You can simultaneously measure DO, temperature, Salinity and pH. By giving an input of salinity, you can also compensate for the DO reduction due to salinity.

AirOxi Tube - Hand Held pH Meter

This hand held pH meter gives accurate and instant pH reading in a digital display. It provides readings in multiples of of 0.01

AirOxi Tube - Root Blowers

Root Blowers are the most suitable type of blowers for aaquaculture applications. Their rugged construction and heavy twin lobes can resist water head and so continue to give good air flow even at water depths of 2 mtr. and more. They are available in sizes of 3 HP and above.