American Implement

23 products found


  • John Deere - Model 1512E - Ejector Scraper

    John Deere - Model 1512E - Ejector Scraper

    The 1512E Ejector Scraper is a four-tire scraper that carries 15 cu yd of material and has a 12-ft cut width. This scraper works well for farmers precision-leveling farmland and construction contractors bulk-hauling materials using 225-hp to 575-hp tractors.

  • X700 Signature Series Tractors

  • Model X710 - Signature Series Tractor

    Model X710 - Signature Series Tractor

    The X710 Signature Series Tractor has a liquid-cooled V-twin iTorque™ Power System for superior mowing performance as well as performing a wide range of other yard care tasks. Available mowers include a 48-in. Edge™ Xtra Mower Deck and 54-in. or 60-in. High-Capacity (HC) Mower Deck.

  • Model D100 - Lawn Tractor

    Model D100 - Lawn Tractor

    The D100 combines dependability, durability and power in every aspect of its construction -  a fully welded steel frame  and a cast-iron front axle. Operating the mower is a breeze, too, with an ergonomic operator station, quality headlights, and an infinite choice of ground speeds. Easy to own. Easy to operate. Easy to maintain. The D100 Lawn Tractor.

Products by Besler Industries, Inc

  • Bale Loaders

  • Model 2000 - Bale Loader

    Model 2000 - Bale Loader

    The model 2000 is designed to mount on about any flatbed and it will allow you to move and feed hay with the truck and flatbed that you already own. Installing the model 2000 on a flatbed usually takes 2-4 hours. The low profile allows you to use the fifth wheel ball on your flatbed without having to raise it up higher than normal. For 'controlled feeding,' the Besler bale bed loader is the ticket. Unroll only the amount of hay needed, then move on to...

  • Model 3000 Series - Bale Loader

    Model 3000 Series - Bale Loader

    The double rotor rolling stalk chopper is a versitile tool with applicatons in most farming practices, from ridge-till to conventional farming. With no gearbox or U-joints to maintain, this low-maintenance tool will provide years of dependanble service.The proven Model 5400 is an aggressive Stalk Chopper. The 5400 has welded angled rotors set at a severe angle.

  • Tillage Equipment

  • Double Basket Assembly

    Double Basket Assembly

    The two ground driven rolling baskets will break up the clods and knock down esisting stalks to provide a smooth level surface. This is an excellent alternative to a conventional harrow. It eliminates leaving bunches or piles of stalks allowing for quicker decay

  • Model 5000 - Field Conditioner

    Model 5000 - Field Conditioner

    This Seed Bed Conditioner is a ground driven machine designed to prepare ground for planting crops such as cotton or corn.

  • Model 2000  - Root Slicer

    Model 2000 - Root Slicer

    The Root Slicer is ideal for pre-plant seed bed preparation in a variety of crops such as corn, milo and sunflowers. It can be adjusted to cut the root crown from the ground allowing minimum till farming with little ground disturbance. Low tractor horsepower, and high-speed operation allows for quick and efficient ground preparation. Recommend speed of 8-12 mph.

  • Model 2800  - Cotton Puller

    Model 2800 - Cotton Puller

    The Cotton Stalk Puller is ideal for the removal of Cotton Stalks. It can be adjusted to pull or cut the cotton stalk from below the surface of the ground. The rolling basket on the floating parallel linkage will level the seed bed and help incorporate the cover crop. This allows the farmer to minimum till with little ground disturbance in a one trip operation.

  • Model 4000  - Sub-Soiler

    Model 4000 - Sub-Soiler

    The Besler Sub-Soiler is designed to help recapture productivity lost to soil compaction. Built tough to deliver exceptional results even under the most demanding conditions, the Besler Sub-Soiler will effectively break up hard pan and reduce soil compaction while minimizing the introduction of clods or slicks. Some degree of compaction results from every farming task. The Besler Sub-soiler will help reduce run off resulting in the retention of...

  • Model 4500  - Ripper

    Model 4500 - Ripper

    The Ripper is designed to help recapture productivity lost to soil compaction with minimal surface soil disturbance. It will fracture and lift the ground to effectively break up the hard pan and reduce soil compaction of clods. This will help reduce run off resulting in retention of expensive chemicals, fertilizer and irreplaceable top soil.

  • Model 6000  - Chop-N-Slicer

    Model 6000 - Chop-N-Slicer

    The Chop-N-Slicer will chop stalks, remove the root crown and prepare the seed bed for planting with one pass through the field. This ground driven machine with high speed capability will save time and money when preparing the ground for planting.

  • Model 7000  - Stalk Chopper

    Model 7000 - Stalk Chopper

    The Model 7000 is a double rotor rolling stalk chopper. It is a versatile tool with applications in most farming, practices, from ridge-till to conventional farming. With no gearbox or U-joints to maintain, this low-maintenance tool will provide years of dependable service. Designed for versatility, the 7000 Series Stalk Chopper features different rotor angle adjustments. Select from straight, medial or severe angle.  

Products by Strobel Manufacturing, Inc.

  • Earth Moving

  • Model GP Pro - Box Scrapers

    Model GP Pro - Box Scrapers

    The perfect match for anyone. Can be used for grading your driveway.finish landscaping, grading feedlots, snow removal, waterways, terraces or just to move DIRT. Whatever your need.Strobel scrapers will give you years of service.

  • Pro Grader

    Pro Grader

    Controls allow changes to blade angle, tilt, tongue swing and more. Electric over hydraulic controls use only one tractor outlet. Walking tandem staggered wheels. Many options like wireless remote controls, LED light package, more. 

  • Earth Packer

    Earth Packer

    Rugged 8' x 8' x 3/8' Square Tube Construction. Wide Drum for Broadest Coverage & Packing With Each Pass. More Chevron-Patterned Teeth Per Drum Than Other Packers. 5,000 pound or 6,000 pound Empty Weight. Add Up To 700 Gallons of Liquid for Maximum Packing

  • Seed Handling

  • Box Seed Tender

    Box Seed Tender

    The farming community is going to bulk seed. Saves significant labor and time, plant more acres per day. Well built, water tight & totally welded. Designed & engineered for low maintenance. Plastic Lundell Cup auger minimizes seed damage.

  • Bulk Seed Tender

    Bulk Seed Tender

    Balanced design saving wear on your truck. Twin 10,000# Torsion Axles, with electric brakes. Lundell Poly cup 7”or 8” Augers, gentle on seed. Low profile, 6’11” Fill Height, safer and easy to fill. Several models available to fit your seed transport needs.

  • Seed Treater

    Seed Treater

    Bulk Inline (BST) and Gravity Seed Treaters (GST). BST accepts, weighs and treats bulk seed. Large surge hopper for flexible loading. On board scales. Portable GST for customers not handling bulk seed. Can be outfitted with or without a generator. Accommodates Buckhorn Center Flow seed boxes

  • Seeding & Preparation

  • Native  - Grass Drills

    Native - Grass Drills

    Rectangular Tube Framework, Welded Frame Construction. Patented Paddle Agitator Forced Feeding System. Durable 14 GA Galvanized Seed Boxes to Prevent Rusting. Easy to Transport, Particularly When Utlizing Strobel Drill Trailer Formerly known as the Miller seeder and/or the Horizon seeder

  • Stalk Cutters

    Stalk Cutters

    Replaces Discs for Primary Tillage in Most Soils. High-speed Operation & Minimal Drawbar Power. Excellent Results in Green Vegetation. Engineered for Low Maintenance. Rugged Design & Quality Construction.