Bateson Trailers Ltd

9 products found

Products

  • Unbraked Trailers

  • Model B84 - Unbraked Trailer

    Model B84 - Unbraked Trailer

    B84 as its name suggests has a clear 8′ x 4′ body and will transport 8 by 4 material, but its primary application is for carrying large quad bikes and grass cutting machines economically. Like the B64 it is supplied with a ramp door and can have a ladder rack and mesh sides as options. The main difference apart from the length is that the B84 has an 18mm phenol coated plywood floor as the B64 is all steel.

  • B53 Unbraked Trailer

    B53 Unbraked Trailer

    B53 is our smallest trailer but is built to the same standards as its larger cousins. It is supplied with a ramp tailboard as standard for loading small vehicles and machinery. A low hinged tailboard is available instead of the ramp door as a free option.

  • B64 Unbraked Trailer

    B64 Unbraked Trailer

    B64 is a heavy duty un-braked trailer with a 6′ x 4′ body and a capacity of over half a ton. It is fitted standard with a ramp door to load machinery and equipment, a standard low door can be fitted to special order if required. Many are supplied with mesh extension sides making it ideal for garden maintenance work, although few people could not find a good use for one of these.

  • 520 Unbraked Trailer

    520 Unbraked Trailer

    Model 520 is a lightweight fully galvanised general purpose trailer, for use on or off road. With a gross weight of 550kg, it does not require overrun brakes and is suitable for use behind most cars, quad bikes and small tractors. Independent rubber suspension is fitted with 16.5 -6.5 x 8 wide tyres, for high speed use as well as minimising ground pressure. The body size of 2.l x l.25 metres is large enough to accommodate the larger quad bikes,...

  • Livestock Trailers

  • Model 30LT 8 x 5 - Livestock Trailer

    Model 30LT 8 x 5 - Livestock Trailer

    Model 30LT is the smallest trailer in our Livestock Trailers range that will accommodate two cattle. It is It is lightweight and ideal for use with cars or smaller towing vehicles. All models have a hot dipped galvanised chassis and are panelled with 2mm toughened alloy sides and a plastic coated galvanised steel roof. The floor is 18mm Phenol coated panels covered with aluminium tread-plate and a folded tread-plate ramp door. The 30LT is fitted with...

  • Model 12LT 6′ x 4′ - Livestock Trailer

    Model 12LT 6′ x 4′ - Livestock Trailer

    Model 12LT is the smallest trailer in our Livestock Trailers range and the only one with a single axle. It is suitable for calves, sheep and pigs. All models have a hot dipped galvanised chassis and are panelled with 2mm toughened alloy sides and a plastic coated galvanised steel roof. The floor is 18mm Phenol coated panels covered with aluminium tread-plate and a folded tread-plate ramp door. The 12LT is fitted with full width independent...

  • Model 40LT 9 x 5 - Livestock Trailer

    Model 40LT 9 x 5 - Livestock Trailer

    Model 40LT is rated at 2 tons gross with a 9′ long body allowing an increased carrying capacity but still able to be towed by a standard car or light vehicle. All models have a hot dipped galvanised chassis and are panelled with 2mm toughened alloy sides and a plastic coated galvanised steel roof. The floor is 18mm Phenol coated panels covered with aluminium tread-plate and a folded tread-plate ramp door. The 40LT is fitted with full width...

  • Model 42LT 10 x 5 - Livestock Trailer

    Model 42LT 10 x 5 - Livestock Trailer

    Model 42LT is a our largest Livestock Trailer with 13″ wheels. It has a 10′ x 5′ body but still able to be towed by a standard car or light vehicle. All models have a hot dipped galvanised chassis and are panelled with 2mm toughened alloy sides and a plastic coated galvanised steel roof. The floor is 18mm Phenol coated panels covered with aluminium tread-plate and a folded tread-plate ramp door. The 42LT is fitted with full width...

  • Model 45LT 10 x 5 8 - Livestock Trailer

    Model 45LT 10 x 5 8 - Livestock Trailer

    All models have a hot dipped galvanised chassis and are panelled with 2mm toughened alloy sides and a plastic coated galvanised steel roof. The floor is 18mm Phenol coated panels covered with aluminium tread-plate and a folded tread-plate ramp door. The 45LT is fitted with full width independent suspension axles and auto-reversing brakes. A front jockey wheel, side door, ramp side gates, locking hitch, ramp lifting springs and a spare wheel are all...