Bentall Rowlands Storage Systems Limited products

Hopper bottom silos are all designed, detailed, programmed and manufactured by Bentall Rowlands. The design is based upon loads and pressures derived from either the German DIN 1055 1987 or Eurocode 1 part 4 with structural calculations based on BS 5950 part 5 or Eurocode 3. Standard ranges from 3m diameter 15 tonnes storage to 10m diameter 1,700 tonnes, all hoppers are designed for high cyclic loading, i.e. high usage of product in and out and at high tonnage rates. The 45 and 60 degree hoppers are standard (other hopper angles upon request). Silo roof panels, wall sheets and stiffening struts (up to 3mm thick) are sheared and formed from pre-galvanised steel sheets, with a minimum of G600 galvanising. Stiffening struts (thicker than 3mm) are sheared and formed from black steel and hot-dip galvanised to finish after manufacture, as too is the supporting entablature steelwork.

All of our Flat bottomed silos are designed, detailed, programmed and manufactured by Bentall Rowlands. The design of Bentall Rowlands Flat bottom silos are based upon the loads and pressures derived from the German DIN 1055 1987 standard. Structural calculation based upon BS 5950 part 5 and wind loading of 50m/sec (180m/h) for a probability period of 25 years. Standard ranges from 3.0m diameter 15 tonnes storage to 27.0m diameter 13,725 tonnes, all silos are designed for high cyclic loading, i.e. high usage of product in and out and at high tonnage rates. Silo roof panels, wall sheets and stiffening struts (up to 3mm thick) are sheared and formed from pre-galvanised steel sheet, with a minimum of G600 galvanising.

The Aylsham smoothwall round silos form part of a fully integrated system designed to store grain, pellets, soya, dust/by-products and other difficult to flow product types. Ranging in size from 3 metre to 9 metre diameter in 1 metre increments, with wall heights up to 15 metres. The Aylsham range of silos can be offered with either a steel full floor or hopper cone assembly. The silo sidewall and full floor or cone utilises the same galvanised steel as our corrugated range of silos. The galvanised covering is to G600 giving a total coating of 600 grams per square metre. The non-corrugated sidewall sheets are fastened using dome headed grade 8.8 spun-galvanised fixings. This ensures that the inside of the silo is as smooth as possible to minimise product hang up.

The Apache feed hopper comes in a range of sizes, 2m to 4m silo diameter and from 0.5 ring to 4 rings in height. This range of silo is designed for the storage of granular feed and the capacities range from 2 tonnes to 50 tonnes. The silo sidewall and cone utilises the same galvanised steel as our industrial range of hopper bottom silos. G600 galvanised steel, shallow corrugated sidewall sheets, grade 8.8 spun galvanised fixings and dome headed bolts in the cone are just some of the standard features which ensure our range of silos will pass the test of time.

Bentall Rowlands belt and bucket elevators provide an ideal solution for the vertical conveying of granular and pelleted materials, meals and powders for agricultural, commercial and full industrial applications. Based on modern elevator technology and manufactured using the latest CAD/CAM manufacturing techniques a comprehensive range of compact self supporting machines are available to suit most ATEX or non–ATEX, indoor or outdoor applications.