8 products found

products

  • ROTO-MIX - Commercial Series Feeders

    ROTO-MIX - Commercial Series Feeders

    Designed with commercial cattle feeders in mind, this rugged unit uses two 30' diameter low speed augers in the bottom, bringing the feed forward without a boiling action to two cross augers. The cross augers then move the feed to the discharge conveyor for fast, efficient and even feed delivery. With ROTO-MIX, there are no high wear, high maintenance and high cost floor chains.

Products by Gehl Company

  • Skid Loaders

  • Gehl - Model 1640E - Radial-Lift Skid Loader

    Gehl - Model 1640E - Radial-Lift Skid Loader

    Height to Hinge Pin - Fully Raised (mm): 96' (2438). Rated Operating Capacity (kg): 850 lbs. (386). Net Power (kW): 24 hp (17.9).The 1640E Skid Loader was designed with quality in mind. There are few tasks this loader cannot handle.

  • Gehl - Model V270 GEN:2 - Vertical-Lift Skid Loader

    Gehl - Model V270 GEN:2 - Vertical-Lift Skid Loader

    Height to Hinge Pin - Fully Raised (mm): 130.3' (3310). Rated Operating Capacity (kg): 2,700 lbs. (1125). Power (kW): Net 70.7 hp (52.7).The V270 GEN:2 Skid Loader is a product of superior innovation and well thought-out product development.  Emissions certified Tier IV engines combine power and efficiency. Self leveling lift action for better control of lifting loads. The chassis aids in superior weight distribution, which further enhances...

Products by CMC-Dalton Ag Products

  • Anhydrous Ammonia Toolbars

  • Model 3000 Series 3PT - Anhydrous Ammonia Toolbars

    Model 3000 Series 3PT - Anhydrous Ammonia Toolbars

    30' Rank allows multiple configurations of row spacing from 15' to 36'. Built from Heavy 6x4 tubing. Extra long slotted hinges allow for maximum down flex. Spacers allow you to tune the bar's flexibility to your specific needs.

  • Model DW Series - Anhydrous Ammonia Toolbars

    Model DW Series - Anhydrous Ammonia Toolbars

    60' Rank. Widest in the industry. Heavy 6x4 tubing. Structural layout allows flexibility for multiple mounting configurations from 15' to 36'. 24* of down flex to allow even penetration in the most uneven environments. 1-1/4' Quick Coupler comes standard.

  • Dry Fertilizer Spreaders

  • Mobility - Model 800 - Row Crop Adjustable

    Mobility - Model 800 - Row Crop Adjustable

    Box material and gussets all stainless steel above the frame. Axle adjustable from 78' to 120'. Heavy Duty 10-bolt hubs. Dual spinner fans with bolt on blades. 8' Stainless Steel Apron Chain. 5000# swivel jack. The 2-speed conveyor drive system allows a wide range of application rates. Safety guard around fans. Hitch with heavy duty safety chain. Hydraulic On/Off for Conveyor. Ground clearance=40' under spinners & 47' under frame. Overall Height =...

  • Mobility - Model 800 PTO - Dry Fertilizer Spreaders

    Mobility - Model 800 PTO - Dry Fertilizer Spreaders

    Dependable field performance - season after season.. Built tough to be tough, offers maximum payload and minimum maintenance, which adds up to lower cost of operation.. High clearance PTO shaft. Virtually eliminates PTO damage.. Longer tongue means smoother trailer-ing.. Fitted Vinyl Tarp Standard - Optional Roll Tarp (pictured). Box material and gussets are all stainless steel above the frame.. Walking beam tandem suspension cuts bump impact 50%....

  • Running Gears for Anhydrous Ammonia Tanks

  • Model WN Series - Running Gears for Anhydrous Ammonia Tanks

    Model WN Series - Running Gears for Anhydrous Ammonia Tanks

    Fifth wheel type reach pole trailer. Available with adjustable or non-adjustable axle . 15' full contact fifth-wheel plate. Extra heavy 2' spindles on 1300 wagon series & 2-1/2' spindles on 1600 wagon series. Front and rear axles are made of 3' x 5' steel tubing on 1300 wagon series. Rear hitch & wheels - 15 x 10 x 6 bolt are standard. Front and rear axles s equipped with two front bolster springs & blocks on rear bolster. 13' turning...