BSG Supplies Ltd. products

The Rear Loader is the best choice for the 15 to 35hp tractor owner, who needs a loader from time to time, but does not wish to pay the approximate £3,000 that it would cost for a good front loader, the rear loader uses the tractor three point lift to raise it and it can be fitted and removed in a few minutes.

The BC 60 for chipping & shredding  is for tractors  from 20 to 50hp.   Wheels allow the machine to be easily moved when not connected to the tractor.  There are 10 shredding and for chipping and there are 2 moving and 2 stationary blades to chip material up to 7cm diameter, the drum speed is 2850 rpm and an adjustable outlet is used to vary the finished material. Machine weight 125kg Tractor mounted pto driven model – Price £1520 + VAT

The Transport box converts any tractor into a pick up truck, it can also tip for bulk materials such as earth or manure.  For moving heavy objects it can be lowered to the ground for low loading and lifted for transport or used as a lift to transfer the load to a higher trailer.

As with other powered implements the rotovators or rotary tillers fit to the tractor unit with either a quick coupling or two or three bolts, which also connects the drive shaft. All models can be reduced in width, tines can be removed and spaced for row crop work.  A safety feature in the machines is designed to protect the drivers feet by stopping the rotovator when the machine is in reverse.

This plough connects to the tractor via the tool carrier. The knife culter to makes the vertical cut and the mulboard (plough brest) turns the furrow. There is a full range of adjustments for depth, tilt and furrow width. Reversible ploughing is easier than conventional ploughing, as it allows you to plough in both directions by rotating the plough at the end of the furrow. Reversible plough, weight 27kg. price £365.  (the tool carrier can be used with all similar implements price £118)

European Approval as agricultural tractor. Total approved mass 3500 kg, towable mass of 1000 kg (unbraked). 1 seat with safety belt. The single sea Caron is a systems tractor/utility vehicle, it is available with a tipping body, mountings for alternate bodies, pto and a three point linkage. Prices start from under £14,600 for a basic  AR100 model up to £32,000 for a larger 630 model with a  cab and all extras. Models can perform as a stretched tractor on hillsides, a transport vehicle or a platform for a specialist equipment. Utility vehicles although more costly than normal tractors, can because of a long chassis and low centre of gravity be the best choice for operations on soft or uneven ground.

The portable tractor shelter is designed to house a small tractor and several implements.  Other things can also be stored such as animal feed, logs or even livestock.  It is cheaper than a container, can easily be moved and does not require a crane for installation.

The portable tractor shed is designed as a tractor garage, to house a small tractor and several implements.  Other things can also be stored such as animal feed, logs or even livestock.  It is cheaper than a container, does not have the same problem with condensation, it can easily be moved and does not require a crane for installation.