Cochet S.A. products

The SUMOSAURE COCHET tire compactor is a pushed tool with 8 or 12 pneumatic wheels depending on the model. It consists of a train of 4 central wheels with a width corresponding to the inside track of the tractor wheels as well as 2 half-trains of 2 external wheels (8-wheel model) or 4 wheels (12-wheel model) allowing to re-support the parts of the plowing which have not been supported by the tractor wheels. The SUMOSAURE is compatible whatever the pneumatic equipment of the tractor: single, twin or wide wheels. Characteristics: Tractor power: up to 200 CV Recommended for tractor: 4WD Self-steering by compensating springs Support width: 165 cm 4 wheels of 10.0 75-15.3 (or equivalent) Weight according to equipment: 600 Kg Weight carrier as standard 2 landing gear as standard Fitted with LED work lights as standard

Self-steering Sumosaurus tire front cup Large width in 8 or 12 wheels. The SUMOSAURE COCHET tire compactor is a pushed tool with 8 or 12 pneumatic wheels depending on the model. It consists of a train of 4 central wheels with a width corresponding to the inside track of the tractor wheels as well as 2 half-trains of 2 external wheels (8-wheel model) or 4 wheels (12-wheel model) allowing to re-support the parts of the plowing which have not been supported by the tractor wheels. The SUMOSAURE is compatible whatever the pneumatic equipment of the tractor: single, twin or wide wheels. Characteristics: Tractor power: up to 200 CVRecommended for the tractor: 4WDSelf-directional by compensating springsSupport width: the same width as that of the seeder8 wheels of 10.0 75-15.3 14 ply (or equivalent)Weight according to equipment: 900 KgWeight carrier as standard2 landing gear as standardEquipped with LED work lights as standard

Equipped with 2 steering axles (1 leader 1 forced follower), the new COCHET truck follows the combine harvester without cutting corners. It thus facilitates the many maneuvers and U-turns that drivers have to perform during harvesting. Wherever the combine will go, the header trailer will follow. Space-saving, the length of this cutting carriage is identical to the working width of the cut. Indeed, the gooseneck having been removed, the front wheels are now located under the cut thus allowing to gain up to 2m00 in overall length.

1-axle door trolley. Very handy on the road, the COCHET header trolleys of the SDSH type are the economical entry-level for the transport of wheat headers or corn headers, of reduced widths. The SDSH cutting trolley is equipped with supports specific to each brand of harvester: NEW HOLLAND, JOHN DEERE, CASE IH, CLASS, etc. Characteristics: For cutting up to 5m80 Delivered assembled Approved for mines Main frame: 200x150x5 Telescopic boom 2 preset supports for each model 2-wheel combine harvester cutting deck 650X10 10 ply Lighting ramp with LED lights, LED flashing light, and agricultural convoy plate supplied as standard Skids supplied with Hitching with quick guide COCHET cutting carriages adapt to all types and all brands of combine harvesters Models compliant with road regulations by the Service des Mines Mining documents provided for insurance.

The cutting carriage with pendulum axle or Tandem, is equipped with 4 wheels. The SDXH header carrier combines the advantages of the single-axle version but with a higher load. The Balancer axle allows perfect tracking by absorbing all the faults of the road and on the entrances to fields the 4 wheels will always remain glued to the ground. Characteristics: For cutting up to 6m10 Delivered assembled Approved for mines Main frame: 250x150x5 Telescopic boom 2 preset supports for each cutting model of 4-wheel combine harvester on 650X10 arm Lighting ramp with LED lights, LED flashing light, and agricultural convoy plate supplied of origin Skids supplied with Attachment with quick guide COCHET cutting carriages adapt to all types and brands of combine harvesters Models comply with road regulations by the Mines Department Mines documents provided for insurance.

COCHET backhoes are designed and manufactured 100% in France. Machining, welding by robots, epoxy painting and assembly are carried out entirely on the same production site. The major Micro tractor brands such as Kubota, Iseki, John Deere recommend the COCHET brand. Guaranteed 2 years without problems, they will serve for several generations of professionals, farmers or individuals.

All our models are deportable and adaptable according to their power on tractors from 14hp to more than 150hp. If our excavators can be adapted at three points on the rear linkage of tractors, we strongly recommend taking the option of the "semi-rigid hitch" which will block the backhoe vertically. This will protect your tractor and keep the full power of the backhoe. The hydraulic unit, driven by the tractor`s power take-off, is connected to a large capacity tank to prevent the oil from overheating and provides high power throughout the work. The seat and controls are ergonomic. The 2 mono-levers control the various functions as on a mini-excavator.

Hydraulic hedge trimmer adaptable to tractor from 30hp. The COBRA hedge trimmer designed and produced by COCHET is ideal for trimming all country hedges, hornbeam hedges and cedar hedges. It adapts to the rear of tractors from 30hp. Fitted with a professional rotating blade, the COBRA hedge trimmer can cut 1m60 on each pass. It does not clog and effectively ejects pruning rejects above hedges. Very powerful you can cut hedges or fruit tree branches up to 3cm. Characteristics Adaptation in 3 rear points Teleflex cable control Hydraulic power unit as standard Vertical cutting height: 5500 mm Horizontal cutting height: 3800 mm Offset on the right side: 2400 mm Cutting width: 1.60 m Floating safety on the cutter bar in the event of light effort Maximum cutting diameter: 30 mm Minimum weight of the tractor : 900KgWeight: 380kg.