CornPro Trailers products

3″x5″x1/4″ main frame. 3″x2″x3/16″ cross members . S-model 24″ centers. H-model 16″ centers. Dexter Torsion axles. Electric brakes (both axles). Name brand radial tires. 4″ channel tongue.

3″x5″x1/4″ main frame. 3″x2″x3/16″ cross members . S-model 24″ centers. H-model 16″ centers. 4″ channel tongue. 14 ga. sides, 16 ga. roof, 14 ga. fenders. 6″ roof radius.3″x4″ rear tube at corners.

3″x5″x1/4″ main frame. 3″x2″x3/16″ cross members. .Dexter Torsion axles. Name brand radial tires. DuPont® epoxy primer & urethane paint. 1 pair of Tread plate ramps. 50/50 rear doors. Passenger side escape door. 6 D-rings. Dome light.

Dexter Torsion axles. Name brand radial tires. 1/2″ rubber mats. Rumber® lined walls. Plexiglass track. 14-guage sides & fenders. Slam latch dividers. . Camper door. Drop down feed windows. Swing out saddle tree. Bridle hooks & Blanket bars. DuPont® epoxy primer & urethane paint. Permanent tack room.

Solid enclosed escape door. Two feed doors. Two tack doors. Tie Loops inside in front of each horse. Tie Loops outside on each side.Dome light in horse compartment. Smooth skin with plexiglass track. Manger with tack area. Romovable head and body divider with butt bars

96″x16′ box. 40″ tall sides. Name brand radial tires. Two 10,000 lbs. Dexter axles. Truck-lite® rubber mounted sealed beam lights. Rear gate opens as “barn doors,” “spreader gate” and “sliding grain doors”. 8″ I-beam main frame, 21#/ft. 3/16″ floor. 11-guage sides. Scissor hoist

Combo Gate – spreader and barn door. Electric brakes on both axles. Scissor hoist. 81″ inside width. 10-guage floor and 12-guage sides. Bulldog® 10,000 lb jack. Truck-Lite® rubber mounted sealed beam lights. Diamond plate fenders and running boards, 11-guage. 2 5/16″ heavy-duty coupler – adjustable. Six welded D-rings. Lockable front box. Tailgate chains included. Push button dump control with quick disconnect. DuPont® epoxy primer & urethane paint. Battery operated break away control

Electric brakes on both axles. 72″ inside width. 10-guage floor and 12-guage sides. Bulldog® 10,000 lb jack. Truck-Lite® rubber mounted sealed beam lights. Treadplate ramps (low profile, SP model, only). 2 5/16″ heavy-duty coupler. Four welded D-rings. Lockable front box. DuPont® epoxy primer & urethane paint. Battery operated break away control

7″ channel mainframe. 6″ channel side frame. 3″ channel cross members on 24″ centers. Tread plate over wheel wells for lower deck height. 5K Dexter Torsion axles. 15″ D-rated quality brand name tires. #1 treated pine-kin dried after treatment. 5′ ladder ramps with double hinge, ramps able to stand up or lay on tail. 4′ dovetail

Available axle sizes: 6K, 7K, 8K. 102″ wide. Name brand radial tires. Cross members on 24″ centers. Dexter axles. Electric brakes on both axles. #1 treated pine floor (kiln dried after treatment). Bulldog® 10,000 lb. drop leg jack. Front chain basket. Stake pockets 100% welded on both sides. 2″x3/8″ rub rail. 8″ channel bulkhead with two D-rings. Spring assist ramps. Special silicone filled electric connectors. Breakaway kit with 12-volt battery. Shot blasted before painting. Two front steps. Shot blasted, primed, then painted