72 products found

products

  • Dirt Moving, Ground Engaging Equipment

  • Belltec - Model NC-Series - Hydraulic Auger Drives

    Belltec - Model NC-Series - Hydraulic Auger Drives

    Belltec NC-Series hydraulic auger drives are available in three models for systems operating between 6 and 30 GPM and 2000 to 3000 PSI. NC-Series auger drives are designed with a planetary gearbox to eliminate chain and sprocket reductions found on drives in this class and price range. The rugged NC-Series Drive will give better service since all rotating parts are sealed away from harmful dirt and debris, and fully running in oil. These compact units...

  • Belltec - Model Max Series - Hydraulic Auger Drives

    Belltec - Model Max Series - Hydraulic Auger Drives

    Belltec Max Series hydraulic auger drives are for systems operating between 10 and 35 GPM and 2000 to 3000 PSI. The Max Series planetary outperforms and has heavier components than any of its competitors. The Max Series was the first tubular frame skid steer hitch on the market with the largest and strongest cradle. Its mounting frame mounts to all modern skid loaders with the universal attach system. The Max Series units are ideal for all drilling...

  • Model 44 Inch - Diameter Land Rollers

    Model 44 Inch - Diameter Land Rollers

    44 Inch DIAMETER LAND ROLLERS flatten high spots and firm soil, protecting equipment and allowing a faster harvest. Available in 8’,10’, and 12’ widths with up to 5700# of loaded weight.

Products by Kverneland Group

  • Kverneland - Soil Equipment - Choppers

  • Kverneland - Model FM - Grass Chopper

    Kverneland - Model FM - Grass Chopper

    The Kverneland FM grass chopper is a small, medium-duty machine for use on slightly rough ground and other green areas: in amenity areas, for tidying up pasture and in similar situations. The Kverneland FM is suitable for tractors up to 50 hp. It is available in 0,90m; 1,20m; 1,50m and 1,80m working width.

  • Kverneland - Model FHP - Multipurpose Chopper

    Kverneland - Model FHP - Multipurpose Chopper

    The Kverneland FHP is a new multipurpose chopper for road maintenance, clearing out field edges, ditches and hedges. In addition the FHP shows versatility in operation on grass, light wood and bushes thus being ideal for the maintenance of parks, gardens and road sides. The Kverneland FHP is suitable for tractors up to 100hp and is available in 1.55m, 1.85m and 2.00m working width.

  • Kverneland - Model FXZ - Grass Chopper

    Kverneland - Model FXZ - Grass Chopper

    The Kverneland FXZ chopper is designed and tested following highest farmer’s requirements in terms of performance and reliability. The FXZ ensures a careful work for a better quality of the residues and its easier natural decomposition.

  • Kverneland - Model FRO - Multipurpose Chopper

    Kverneland - Model FRO - Multipurpose Chopper

    The Kverneland FRO is a new multipurpose chopper for chopping grass, pasture, set-aside land and stubble. A strong double headstock allows mounting the machine in front or behind the tractor. Together with the hydraulic offset it gives a multi-purpose versatility for nearly all conditions e.g. clearing out field edges, orchards road edges. The hydraulic offset is ideal for clearing out field edges – versatile use also for road...

  • Soil Equipment - Cultivators- Seedbed Cultivators

  • Kverneland - Model TLG - Precision Seedbed Cultivator

    Kverneland - Model TLG - Precision Seedbed Cultivator

    The TLG is a heavy-duty precision cultivator designed for the optimum preparation of seedbeds for sugar beet, potatoes and vegetables. The TLG consists of four working zones: the robust levelling board in the front, an effective cage roller for depth control, four rows of effective S-tines and a finger harrow or a single or double roller at the rear. This combination makes the TLG an ideal cultivator for the preparation of a very firm, levelled and...

  • Kverneland - Model TLC  - Vibro Cultivator

    Kverneland - Model TLC - Vibro Cultivator

    Thanks to its excellent weight distribution, precise depth control and optimum ability to follow ground contours the Kverneland TLC seedbed combination produces a perfect seedbed in all types of soil. The finer soil particles are deposited in the lower level of the tilth to promote rapid and uniform germination and also to prevent loss of moisture whilst the coarser clods are kept on the surface in order to reduce the risk of surface capping. Working...

  • Soil Equipment - Cultivators- Stubble Cultivators

  • Kverneland Knock-on - Stubble Cultivators

    Kverneland Knock-on - Stubble Cultivators

    Knock-on is a patented system and the easiest way of exchanging parts on a cultivator: either in order to adapt the machine for the job to be done or to exchange wearing parts. Kverneland always use steel of highest quality. Thus allowing the Knock-on® system to be based on a simple locking technique: requesting only a hammer to knock on and off the parts within seconds. The Knock-on® range offers five cutting widths with shares of 80,...

  • Kverneland Turbo - Stubble Cultivators

    Kverneland Turbo - Stubble Cultivators

    Kverneland  re-introduces the trailed cultivator Kverneland Turbo in working width of 6.5m and 8m. The Kverneland Turbo has been designed with 5 rows of tines for all kind of soil cultivation: stubble cultivation after harvesting from 3cm to 15cm, seedbed preparation after ploughing and also shallow working in spring or  2nd stubble cultivation after manure/slurry and  after green fertiliser crops.

  • Soil Equipment - Disc Harrows

  • Kverneland Visio  - Model 200 - Heavy Duty Disc Harrow

    Kverneland Visio - Model 200 - Heavy Duty Disc Harrow

    A heavy-duty disc harrow  for optimum performance, durability and minimum operating cost.The Visio 200 disc harrow is constructed around a central robust 200x300x10 mono frame which ensures machine stability and operator visibility. The special arrangement of the offset disc gangs guarantees perfect results over the full working width. However, the transport width is under 2.50m and in accordance with road traffic regulations. The discs are...

  • Kverneland Qualidisc - Compact Disc Harrow

    Kverneland Qualidisc - Compact Disc Harrow

    Stubble cultivation is of major importance within conservation tillage: It incorporates weeds and volunteer cereal seeds into the soil with an intensive mixing and promotes their germination for a more efficient subsequent treatment. The even incorporation of the straw presents a key factor for seed germination.Therefore, Kverneland has designed the Qualidisc to comply with these requirements, but also to offer the farmer a versatile machine which is...

Products by McHale Engineering Limited

  • Variable Chamber Round Balers

  • Model V660  - Variable Chamber Round Baler

    Model V660 - Variable Chamber Round Baler

    Variable Chamber Round Baler - Belt Baler.Built to last and developed on some of the world's most rugged terrain, the McHale range of round balers and round and square bale wrappers is known throughout the world for durability, reliability, innovation and value for money.As with all McHale machines, the V6 variable chamber round baler range(belt baler range) has been designed with the demands of today's farmer and contractor in mind.

  • Handling Equipment

  • McHale - Model 691  - Round Bale Handler

    McHale - Model 691 - Round Bale Handler

    The McHale round bale handler is a heavy duty handler with rotating rollers that have tine reinforcement. It can be used to carry one bale of silage or spike two bales of hay or straw. Simplicity, versatility and strength are the main features of the McHale 691 round bale handler. When the 691 round bale handler is transporting wrapped bales, two adjustable rollers powered by a double-acting hydraulic ram, close to cradle and carry the wrapped or...

  • Straw Blower & Bale Feeder Range

  • McHale - Model C460  - Straw Blower & Bale Feeder

    McHale - Model C460 - Straw Blower & Bale Feeder

    The McHale C460 can be used to distribute bedding material quickly and efficiently leaving a thick aerated bed of straw. The McHale C460 can also be used to feed round bales of silage. The McHale C460 bale feeder & straw blower is a versatile machine, which can be used for feeding short fibre silage and can also be used to easily distribute long fibre fodder such as hay and straw.

Products by METAL-FACH Sp. z o. o

  • Front Loaders

  • Shock  - Model T229 - Front Loader

    Shock - Model T229 - Front Loader

    A well placed center of gravity in the T229 front loader lowers the load on the shock absorbers of the tractor. Optimum angles of loading and unloading ensure work efficiency. The loader is equipped with a stabilizing frame. A modern frame EURO/SMS ensures quick and comfortable changing of accessories. Lifting capacity 1300/1600. Quick and easy connection of hydraulic hoses. Mounted with the use of bolts. The shock absorber dampens the shaking of the...

  • Model T466 - Front Loader

    Model T466 - Front Loader

    The T466 suspended loader is intended for lifting and unloading of big bags filled with fertilisers and for direct loading of the load body of fertiliser spreaders. The loader may be hitched to a tractor along with a fertiliser spreader. The loader is designed for coupling with Class 2 one-man tractors equipped with a driver’s cabin, a fully operational three point hitch and a power take-off shaft. Special adapters are available from the...

  • Front Loader Equipment

  • 700kg Bale Grab

    700kg Bale Grab

    Our bale grab is intended for the transport of straw, hay, and silage bales. It is equipped with one servomotor. The arms float meaning that the closing and the opening of the arms is independent of each other and at different speeds which allows for the grabbing of bales out of a stack without damaging the adjacent bales. A solid and reliable construction of the grabbing arms ensures safe transport of wrapped bales. Possibility of mounting...

  • Trailers

  • Barrow  - Model T930 – 6t - Trailer

    Barrow - Model T930 – 6t - Trailer

    The T930 barrow is a universal carrier for various materials (e.g. beetroots, wheat grains, sand, etc.). The trailer is unloaded manually or by tipping the load body to the rear. The body tips up to the right angle, which facilitates easy discharge. The machine is relatively short, which makes it manoeuvrable in tight corners. It also features a pneumatic brake system and a hydraulic system powered from the coupled tractor.

  • Manure Spreaders

  • Model N267/1 – 6t - Manure Spreader

    Model N267/1 – 6t - Manure Spreader

    The N267/1 manure spreader with the loading capacity of 6T on a double suspension is equipped with a four drum vertical adapter tilted forward, which guarantees an even, wide spreading of manure. The drums spin in pairs in opposite directions ( looking from the rear of the machine – two right ones – counter clockwise, two left ones – clock wise). Every drum is balanced in order to reduce vibrations during operation. High quality...

Products by Teagle Machinery Ltd

  • Tomahawks- Bale Processor

  • Fertiliser Spreaders

  • Teagle  - Model 8  - Compact  Fertiliser Spreader

    Teagle - Model 8 - Compact Fertiliser Spreader

    Our Spread Pattern has been developed so that when two adjacent bouts overlap, the total amount spread is even across the full bout width. With our system it is straightforward to drive at the correct bout width by ensuring that fertiliser is thrown just as far as the last set of tractor wheelings. No rotors to change, vanes to adjust or spread widths to set. Simply adjust the spread rate as described in the instruction book and you are...

  • Teagle - Model XT20  - Fertiliser Spreader

    Teagle - Model XT20 - Fertiliser Spreader

    Our Spread Pattern has been developed so that when two adjacent bouts overlap, the total amount spread is even across the full bout width. With our system it is straightforward to drive at the correct bout width by ensuring that fertiliser is thrown just as far as the last set of tractor wheelings. No rotors to change, vanes to adjust or spread widths to set. Simply adjust the spread rate as described in the instruction book and you are ready...

  • Teagle - Model XT24 and XT48 - Fertiliser Spreader

    Teagle - Model XT24 and XT48 - Fertiliser Spreader

    Choose a spreading system that naturally eliminates errors and produces outstanding results. Wind, driving errors and variation in fertiliser can combine to result in an uneven spread pattern. The gentle taper of the 'triangular' spread pattern produced by the XT24 and X48 distributes any error across the full width of the bout. Conversely, outward spinning systems typically produce a trapezoidal pattern which focuses errors in the lapped...

  • Muck Spreaders

  • Grassland

  • Single Spindle Pasture Toppers

    Single Spindle Pasture Toppers

    All models incorporate a range of features to ensure ease of operation and maintenance.  Our Toppers incorporate high strength pressings and an impressive driveline and blade system resulting in a very robust machine. All machines built at our factory in Cornwall are now Shot Blasted and finished with Powder Coat paint for outstanding durability.

  • Belt Driven Pasture Toppers

    Belt Driven Pasture Toppers

    All models incorporate a range of features to ensure ease of operation and maintenance. Our Toppers incorporate high strength pressings and an impressive driveline and blade system resulting in a very robust machine.  All machines built at our factory in Cornwall are now Shot Blasted and finished with Powder Coat paint for outstanding durability.

  • Flail Mowers & Forestry Mulchers

  • Mini-Garden Flail Mower

    Mini-Garden Flail Mower

    Available in three cut widths from 1.15m, 1.25m, 1.45m. Suitable for mulching light grass and general amenity areas. From 12HP to 25HP / Category 1 linkage . PTO speed 540 rpm. Rear mount only

  • Swath Conditioners

  • Super-Ted - Swath Conditioners

    Super-Ted - Swath Conditioners

    Engineered specifically for the heavy crops found in the UK, our attention to detail delivers unparalleled performance in the field in both grass and straw applications. The Super-ted 160 has a 1.6m. wide pick-up and is ideal for silage, straw from smaller combines (up to 16' header width) and hay. The Super-ted 221 has a 2.2m. wide pick-up and is suitable for silage (will do two 3m. swaths side by side), straw from all modern combines and hay.

  • Tillage & Cultivation

  • Roterra  - Power Harrow

    Roterra - Power Harrow

    Medium duty - 25 Series : 2.5m working width. Heavy Duty - 35 series : 3m and 4m working width. Very Heavy Duty - 55 series - 3m and 4m working width. Models rated from 100HP to 200HP / Category 2 linkage .  Compact combination unit when fitted to Polymat Pneumatic Drill

  • Multidisc - Disc Harrow

    Multidisc - Disc Harrow

    Multidisc - Heavy Duty : 510mm disc diameter. Multidisc XXL - Very Heavy Duty : 610mm disc diameter.  Models rated from 70HP upwards / Category 2 & 3 linkage . Available with optional Polymat Compact Pneumatic Drill. Hydraulic folding options available up to 12m

  • Multidisc Vario - One-Pass Cultivator

    Multidisc Vario - One-Pass Cultivator

    Vario 250 - 2.5m working Width - 4 tines. Vario 300 - 3.0m Working Width - 6 tines. Models rated from 100HP to 200HP / Category 2 linkage . Available with optional Polymat Compact seed drill

  • Polymat  - Pneumatic Drill

    Polymat - Pneumatic Drill

    Polymat universal metering device for Cereals and Prilled Seeds, hopper capacity of 820 litres. The metering unit is fully adjustable and has a reduction setting for the use of fine seeds. A cleaning brush is supplied as standard. The seeds are dropped into the air flow and transported via a specially shaped evevation column, then distributed evenly to the tubes by the distribution head. Output rate of 1 to 360 kg/ha (Peas and Beans approx. 450 kg/ha)...

Products by Durabilt Industries, LLC

  • Dirt Tools

  • Model DP 60 - Dirt Pan

    Model DP 60 - Dirt Pan

    The Dirt Pan attached to the three point lift of a tractor is intended to be used in landscaping, agriculture, and light construction. The unit provides an efficient means of scooping, lifting, and moving soil between points without dragging the soil.  Variable cutting depth is controlled by the tractor's three point lift. Variable dig angle and dump height are hydraulically controlled by the tractor's single remote valve. Digging, dumping, and...

  • Model L - Landscraper

    Model L - Landscraper

    The Landscraper planes for irrigation, smooths feed lots and spreads rock & gravel. The closed ends allow you to drag material.

  • Tilt Landscraper

    Tilt Landscraper

    The Tiltcraper grades road sides, planes for irrigation, smooths feed lots and spreads rock & gravel. The closed ends allow you to drag material.

  • Model SS07 and SS08 - Swivel Scraper

    Model SS07 and SS08 - Swivel Scraper

    The Swivel Scraper is a heavy duty rear blade that can be tilted up to 24” from level. It can also be offset from the tractor seat up to 24” right or left with the optional swing cylinder.

  • Hay Tools

  • Model HCI Series - High Clearance Rake

    Model HCI Series - High Clearance Rake

    The HCI High Clearance Rake with independent rake arms is a ultimate full feature rake. Proven compound angle folding design along with wide stance and the low profile, allows for compact and stable transport. Easy adjustment of spring tension on each individual rake arm, as well as easy adjustment of Windrow width and rake wheel angle for all crop conditions. Standard Hydraulic Flow controls and easy wing adjustment for greater windrow adjustment....

  • Model RCI  - High Clearance Rake W/Independent Rake Arms

    Model RCI - High Clearance Rake W/Independent Rake Arms

    The RCI Rake, a full featured value based high clearance rake with independent wheel arms, has a proven compound angle folding design along with wide stance and the low profile allows for compact and stable transport. Windrow width set by wing angle. Options offered: Dual and Single center kicker wheels and hydraulic flow controls.

  • Tumble Bug

    Tumble Bug

    The Tumblebug quickly moves round bales with ease. Loading and unloading from the truck or tractor seat, no need to get off the tractor or out of the pickup to load the bale.

  • Model RC - Caddy Rake

    Model RC - Caddy Rake

    The rake caddy provides a stable platform for your rake allowing for ease of operation and quick hook up.

  • Model CC2 - Cutter Caddy

    Model CC2 - Cutter Caddy

    The CC2 Cutter Caddy is an economical caddy for your disc mower with the standard offset wheel design.

  • Model CC3 - Cutter Caddy

    Model CC3 - Cutter Caddy

    Cutter Caddies provide an easy hitch system for 3 point disc mowers. Hitching your mower to the tractor is now a one man, back up to it and insert the hitch pin operation. The tractor no longer has to carry the weight of the disc mower this makes for easier mowing and turning. The parallel wheel design of the CC3 Caddy makes it more stable with improved turning over the offset wheel design.

  • Model PP Series - Pasture Punch

    Model PP Series - Pasture Punch

    The Pasture Punch is a heavy Duty punch aerator for aerating pastures, Hay fields, sod fields or sports complexes. This allows the moisture and nutrients to reach the roots and helps relieve root boundness. Also available with a smooth roller.

Products by M K Martin Enterprise Inc.

  • Agricultural Products

  • Caddy - Model SCIC 250 &1700 - Implements

    Caddy - Model SCIC 250 &1700 - Implements

    The Implement Caddy by M.K. Martin converts your 3PH implements to a trailed versions when access to a 3PH equipped unit is not available. This alternative to conventional 3PH mounting allows greater flexability over your work force. This alternative to conventional 3PH mounting allows greater flexability over your work force.

  • Gravity Box

    Gravity Box

    The MK Martin Gravity Box comes in 270 to 745 bushel capacities. It comes standard with viewing windows, road lights, front ladder as well as an unloading door that includes a metering door for custom unloading speeds.

  • Model MK 650 & 850 - Grain Cart

    Model MK 650 & 850 - Grain Cart

    The MK Martin Grain Cart carries up to 875 bushels. Equipped with a single front corner mounted auger the buggy can be fully unloaded in approximately 2 minutes.

  • Model XD - Extreme Duty Grader Blade

    Model XD - Extreme Duty Grader Blade

    The Extreme Duty Grader Blade from MK Martin mounts to your tractors 3-point hitch. Powered by your tractors hydraulics the XD series blade has hydraulic cylinders to adjust the offset of the arm, the blade angle, and the tilt of the blade. An additional hydraulic cylinder on the optional wheel kit helps to control how much the blade bites. The Extreme Duty grader blade is available in 8’, 9’ and 10’ models for tractors with a rated...

  • Land Levelers

    Land Levelers

    These rugged scrapers come in a range of sizes from 8 to 12 feet to fit your needs and your equipment. Standard on all models is our 1/2 inch thick reversible hardened cutting edge, ready to smooth out the bumps and fill in the hollows. Cutting depth is controlled by a 3” x 8” hydraulic cylinder so you can decide how much of a bite to take and adjust on the go. Hydraulic tilt models use a spindle and tandem tube design together with a...

  • Heavy Duty Bale Handler

    Heavy Duty Bale Handler

    The Bale Handler's heavy duty 1” x 1” square tubing structure dares to stand up to the toughest task. Many years of quality workmanship has made the Forage King hay elevator your No.1 choice. 1” sealed bearings on all shafts make it a low maintenance and durable piece of equipment.

  • Strip Cat - Strip Tillage System

    Strip Cat - Strip Tillage System

    The Strip Cat is fully adjustable to your field conditions. Available in a 3PH or Trailed version the Strip Cat can be set up for either liquid or dry fertilizer application allowing an all in one tilling, seeding, and fertilizing solution.

Products by Vicon - Kverneland Group

  • Soil Equipment- Power Harrows

  • Vicon - Model TT 15 - Toptiller

    Vicon - Model TT 15 - Toptiller

    The Toptiller TT 15 is designed for tractors up to 103kW/140HP and is ideal for use on small and medium-sized farms. The new self-supporting trough constuction, as well as the possibility to use „Quick-Fit“ tines, offers improvement in performance. The central reliable change gearbox up to 150 HP offers a wide range of various speeds by interchangeable gears. It is available in working widths of 2.5 and 3 metres. Four tine rotors (8...

  • Vicon - Model TT 18 - Toptiller

    Vicon - Model TT 18 - Toptiller

    The Vicon Toptiller TT 18 is a robust medium power harrow constructed for effective operation in most conditions. Made for use on most farms and for combination with most seed-drills. The new robust trough construction and the Quick-Fit tines guarantee for years of work with minimum maintenance. The Toptiller TT 18 with working widths from 3,00m, 3,50m and 4,00m is for tractors up to 132kW/180 HP. The central reliable change gearbox up to 180 HP...

  • Vicon - Model TT 25 - Toptiller

    Vicon - Model TT 25 - Toptiller

    The Vicon Toptiller TT 25 is the top of the range power harrow for big farmers, contractors and for the most difficult conditions. It is robustly designed to cope with heavy soil conditions and tractors up to 250 hp. The heavy-duty through construction together with the shaft dimensions and the heavy bearings, ensure perfect work for years. This reduces peak loads on the driveline and results in smoother running. The Toptiller TT 25 is available...

  • Soil Equipment- Vicon Seedbed Cultivators

  • Vicon Cultimat - Seedbed Cultivators

    Vicon Cultimat - Seedbed Cultivators

    Thanks to its excellent weight distribution, precise depth control and optimum ability to follow ground contours the Vicon Cultimat seedbed combination produces a perfect seedbed in all types of soil. The finer soil particles are deposited in the lower level of the tilth to promote rapid and uniform germination and also to prevent loss of moisture whilst the coarser clods are kept on the surface in order to reduce the risk of surface capping. Working...

  • Vicon Cultimat  - Model Pro  - Seedbed Cultivator

    Vicon Cultimat - Model Pro - Seedbed Cultivator

    Thanks to its excellent weight distribution, precise depth control and optimum ability to follow ground contours the Vicon Cultimat Pro seedbed combinations produce a perfect seedbed in all types of soil. The finer soil particles are deposited in the lower level of the tilth to promote rapid and uniform germination and also to prevent loss of moisture whilst the coarser clods are kept on the surface in order to reduce the risk of surface capping....

  • Vicon - Model X-Sem 3 - 3-Point Mounted Light Land Alternative Cultivators

    Vicon - Model X-Sem 3 - 3-Point Mounted Light Land Alternative Cultivators

    Two 3-point mounted light land alternative cultivators with 2 or 3 rows of vibrating tines, and different linkage system for mounting the drill. Their function is to prepare a nice seedbed by leveling, crumbling and packing the soil. The X-SEM3 is an alternative to standard combinations offering high-output performance at a limited price. With its strong design it can be combined with the heaviest seed drills. The seed drills Vicon Airsem or Mecasem...

  • Seeding Equipment - Precision Seed Drills

  • Vicon Unicorn - Precision Seed Drills

    Vicon Unicorn - Precision Seed Drills

    UNICORN, the mechanical single seed drill for sowing pelleted beet seed. Renowned for its quality and reliability and proven adaptability to the different operating and adjustments, which arise in the field. UNICORN, with its 6 to 24 row units configuration, easily copes with varying operating conditions. Of special note is the parallelogram design and the frame construction, which is as robust as it is variable. With mechanically driven seed units...

  • Seeding Equipment - Seed Drills

  • Vicon Mecasem  - Model XTC - Mechanical Seed Drill

    Vicon Mecasem - Model XTC - Mechanical Seed Drill

    With its Mecasem XTC, Vicon has expanded its range of mechanical seeders with integral mounting model based on the tried and tested Vicon Toptiller, the Mecasem XTC ensures the best seeding results after ploughing and conservation tilling. One of the main advantages for operators is the constant depth control for the coulters, thanks to the direct link between the coulter bar and the roller mounted with a parallelogram linkage system –...

Products by Market Farm Equipment Limited

  • Market Augers

  • Maximum Reach Augers

    Maximum Reach Augers

    'REACH FOR THE CLOUDS' with our new MAXIMUM REACH AUGER. In today's market, planters and seed drills are getting bigger and bigger as well as harder and harder to fill. Because of height and distance to the seed tanks, it becomes almost impossible to reach. Not anymore, the 18' Maximum Reach Auger has 28' of frontal reach & 55' of actual side to side working reach. Standard features on this auger include 5' cupped plastic flighting, a 3-stage...

  • Planter Cross Augers for Fertilizer

    Planter Cross Augers for Fertilizer

    MARKET PLASTIC CROSS AUGERS are time saving accessories which allow you to auger bulk fertilizer quickly & easily into your corn planter. Whether you have a simply rigid planter or a more complicated unit like the KINZE 3600 flex planter, MARKET FARM EQUIPMENT makes a cross auger to fit it. All of our cross augers feature a heavy gauge PVC tube with polyethylene plastic hoppers & drops. Available in 6' diameter for most 4, 6, 8, 12 & 16...

  • Planter Cross Augers for Seed

    Planter Cross Augers for Seed

    MARKET PLASTIC CROSS AUGERS are time saving accessories which allow you to auger bulk seed quickly & easily into your planter. All of our seed cross augers feature a heavy gauge PVC tube with polyethylene plastic hoppers & seed drops c/w shut-off slides. Available in 6' diameter with bristle or cupped plastic flighting. Every planter is different so we build the cross auger to suit your planter. All we need is the center to center measurements...

  • Ultra Glide Auger

    Ultra Glide Auger

    The MARKET ULTRA GLIDE AUGER features a plastic polyethylene hopper which mounts closely to the gravity box door. Easy to clean out, simply remove the 3' threaded plastic cap at the bottom of the auger tube. The main advantage over the competition is that as the auger is swung from side to side, the auger spout remains pointing downward. This allows proper flow with less chance of plugging. Most competitive augers have spouts that rotate up as the...

  • Model 612 - Swivel Style Auger

    Model 612 - Swivel Style Auger

    The MARKET 612 SWIVEL STYLE AUGER has also been around for over 30 years. It was the original design for our steel augers. The MARKET 612 SWIVEL STYLE AUGER is available in a 6' diameter and lengths of 12', 14' & 15'. The swivel hopper will fit door openings up to 38 1/2' wide. The auger is a sump design where the hopper moves up & down with the auger when raised. The advantage of this hopper design is maximum ground clearance, especially when...

  • Folding Truck Auger

    Folding Truck Auger

    Tired of the old rigid mounted steel augers? Our MARKET PLASTIC FOLDING TRUCK AUGERS offer a 180 degree swing.  Sometimes a simple design can be the best, no cumbersome cylinders or levers.  The auger stores vertically on the rear of your truck.  Removal of the auger from the transport bracket allows it to be lowered away from the truck. Lower to waist height, unfold auger into working position, secure with overcenter clamp and your...

  • Market Compact Cultivator

    Market Compact Cultivator

    The MARKET COMPACT CULTIVATOR is a 3 point hitch (Cat. 1) unit that performs a multitude of in-field tasks such as seedbed preparation, soil aeration and weed control.  Cultivators are available in 4', 5' & 6' widths.  The compact design requires low horsepower allowing you to get those small acreages, test plots or gardens done in no time.  The heavy duty steel frame is available in red, blue, orange, black or green.