8 products found

Products

• Subsoilers

• 

  Model 200 - Subsoiler

  All frames are constructed with 5' x 7' x ½' structural steel rectangular tubing and are angled to provide maximum soil action with a minimum of draft load. Specially curved shanks are mounted to the rear of the frame to maximize ripping depth  and assist in alleviating trash build up. The 1 ¼' wide shanks are available with either  26' or 29' clearances between the bottom of the frame and the point.

• 

  Model 300 - Subsoiler

  Frames: All frames are constructed with 6' x 10' x ?' structural steel rectangular tubing and are angled to provide maximum soil action with a minimum of draft load.

• Disks

• 

  Heavy Duty Border Disk

  Disks: 28', 26', 24' disks are standard, 26', 24', 22' disks      and notch disk are available. Frame: The heavy duty frame is 5 x 7 x ½ rectangular tubing. Arbor Bolt: 1-1/2' square. Hitch: Combination three point hitch has category two and   three. Spools: Spools are cast metal.

• 

  Light Duty Border Disk

  Disks: 22', 24', 26' disks. Frame: The heavy duty frame is 5x5x1/2 rectangular tubing. Arbor Bolt: 1-1/2' square Hitch: Combination three point hitch has category two and three. Spools: Spools are cast metal. Bearings: Heavy duty bearings and bearing guards.

• Rippers

• 

  Finishing Rippers

  Finishing rippers are used in plowed fields to level and break clods. Being  able to enter fields before moisture is lost helps in breaking the clods.  Compaction is eliminated due to the ripper shanks breaking up the soil  level for the rollers. The rollers gauge the depth of the shanks and the  shanks put down pressure on the rollers to help break up clods.finishing ripper. Finishing rippers can be used after lasering to break up...

• 

  Orchard Ripper

  Frames All models are made with extra heavy-duty frames constructed of 5' x 7' x ½' rectangular structural steel tubing. Steel Rings Rings are welded construction and hard faced between rings to eliminate wear. The floating ring design works excellent on contours between rings and uneven ground. Specially mounted  teeth are designed to take on the heaviest soils.

• Loose Ring Rollers

• 

  Loose Ring Rollers

  Ring Rollers also known as packers, mulchers, or clod busters are one of the oldest and most versatile tillage tools on the farm today. Pulling a ring roller will insure better seed soil contact and  improve seed germination. In doing so you will help moisture stay in the soil, instead of evaporating out due to air pockets left behind in the fields  full of clods. The result is a more uniform seed bed, for better germ- ination, better...

• 

  Folding Ring Roller

  Steel rings last longer in rocky or heavy clod conditions; thus, cutting downtime and costly ring replacement. The 16/24 rings are all welded construction and are hard-faced between rings to eliminate wear. The floating ring design works excellent on seed beds and for level and uneven ground. Other ring sizes are available. Hydraulic gauge wheels for easy transport. Tire sizes are 14L-16.1 12-ply. The DWK Ring Roller has one of the best warranties on...