18 products found
Dondi S.p.A. Products
-
Rotary Ditcher
-
Double Wheel Rotary Ditchers
DONDI double-wheel rotary ditchers offer the highest level of technology and performance for digging nd maintaining drainage and irrigation ditches. They can be used on any wheeled tractor with creep speeds of 0.4 / 0.6 for digging new ditches, while a higher advancement speed of up to 1.2 Km/h can be used for simple maintenance work. The standard digging angle is 32'. and digging angles of 18% 20% 23°. 42s are available on request in order to adapt ...
-
Dondi - Special Double Wheel Rotary Ditchers
DONDI double-wheel rotary ditchers offer the highest level of technology and performance for digging and maintaining drainage and irrigation ditches. They can be used on any wheeled tractor with creep speeds of 0.4/0.6 km/h for new ditches, while a higher advancement speed of up to 1.2 km/h can be used for simple maintenance work. The standard digging angle is 32°, and digging angles of 18°, 20°, 23°, 42° are available on request in ...
-
Subsoilers and Trolley
-
Dondi - Model MEGA - Deep Subsoilers
They are mounted subsoilers suitable for high-power tractors and are able to work up to 70 cm depth. The very high clearance (115 cm) ensures a perfect flow of soil even with a lot of residues, preventing any clogging. The tines have a high-resistance pull-bolt safety device to protect the machine and the tools against shocks and overloads. They can be combined with different kind of hydraulic rear rollers, depending on the type of soil and the finishing ...
-
Dondi - Model 700 and 800 - Subsoilers
This machine is particularly suited to replace plowing, since it can handle work at depths of up to 50/60 cm, with a working width that makes the use of subsoilers one of the most cost-effective systems available today. The special 45-degree inclination of the anchor makes the DONDI subsoiler efficient for rapid soil penetration and cost-effective because it significantly reduces traction effort through easy passage of the soil on the anchor, while also ...
-
Agriculture Essentials
-
Agricultural Rear Scrapers
Machine complete with lateral guards for dragging the material to be leveled. Interchangeable steel cutting edge. Double press-bent sheet-metal ...
-
Post Hole Diggers
Equipment used to create vertical holes in the ground with various diameters, from 15 cm to 100 cm and at a depth until to 150 cm. The drive is ensured by a cardan shaft with a safety bolt. All the tips have interchangeable blades. There are various types of machines: a model for holes from 15 cm to 40 cm without a rotation reverser; a model for holes from 15 cm to 60 cm without reverser or with mechanical or hydraulic control rotation reverser; a model ...
-
Road Maintenance Machines
-
Broad Movement Ditcher
Broad movement mono-wheel, mono/double-wheel ditchers. A device for digging and maintaining ditches to the side of tractor. During transport, the doitcher is carried in avertical position. It is possible also to supply just the side-mount device, to which any type of ditcher or mower can be attached. Motion transmission is by cardan ...
-
Model DSL - Hydraulic Side-Mounted Device
The DSL side-mounted device is an interchangeable device equipped with an integrated hydraulic system that, depending on the machine's assembly configuration, may be attached to either the front or rear of tractors of suitable ...
-
Open Field Soil Tillage - Subsoilers And Decompactors
-
Dondi - Model Titan - Trailed Subsoilers
Trailed subsoilers suitable for tractors with power from 300 to 450 Hp, available with widths from 5 to 7 m for a maximum working depth of 40 cm. Height from the ground of 80 cm for excellent management of crop residues, also at the maximum depth. Intended for contractors or large farms that need to till the soil at a medium depth and high hourly rate, minimising tillage ...
-
Dondi - Model Mega T - Trailed Subsoilers
Trailed subsoilers suitable for tractors with power from 250 to 350 Hp, available with widths of 3 m for a maximum working depth of 70 cm. Height from the ground of 100 cm for excellent management of crop residues, also at the maximum depth. Intended for operators who need to till soil at a great ...
-
Dondi - Open Field Soil Tillage - Minimum Tillage Cultivators
-
Dondi - Model BIG - Combined Cultivators
Combined cultivator suitable for tractors with power from 220 to 350 Hp, available with widths of 4 to 6 m for a maximum working depth of 35 cm. Height from the ground from 70 cm for optimal management of crop residues, even at the maximum ...
-
Dondi - Model MAXI - Combined Cultivators
Trailed combined cultivator for tractors with a power between 300 and 600 Hp, available in width of 5 to 7 m for a maximum work depth of 35 cm. Height from the ground of 70 to 85 cm for optimal management of crop residues, even at the maximum ...
-
Dondi- - Model Junior evo - Combined Cultivator
Combined cultivator suitable for tractors with power from 140 to 200 Hp, available with widths of 3 m for a maximum working depth of 35 cm. Height from the ground of 70 cm for excellent management of crop residues, also at the maximum ...
-
Open Field Soil Tillage - Cut Rollers For Residues And Cover Crops
-
Dondi - Trailed Cut Rollers
Trailed cut rollers suitable for tractors with a power of 110 to 180 Hp, available in widths 4 and 6 m. Intended for professional users who need to passively cut the vegetation cover from cover crops or crop residues. High operational speeds, low management and maintenance costs, maximum ...
-
Vineyard And Orchard Work - Under-Foliage Work
-
Dondi - Model VITIS PRO - Tool-Holder for Single Inter-row
Tool-holder for single inter-row available in two versions (Large and Medium) to mechanise espalier vineyards and orchards with minimum inter-row of 1.7 to 2.3 m based on the work tool. The PRO setup is the richest and features an advanced hydraulic system that is able to manage, through a single continuous flow from the tractor, the inter-row unit simultaneously with the movements of the tool-holder (wheel, chassis-widening, tool ...
-
Dondi - Model VITIS - Tool-Holder for Single Inter-row
Tool-holder for single inter-row available in three versions (Large, Medium and Narrow) to mechanise espalier vineyards and orchards with minimum inter-row of 1.45 to 2.3 m based on the work tool. The setup is basic and features a hydraulic system that manages the inter-row unit with a single continuous flow from the tractor; hydraulic widening of the chassis and any optional movements (wheel and tool inclination) are controlled directly by the ...
-
Dondi - Model VITIS SERRA - Tool-Holder For Single Straddle Devices
Tool-holder for single straddle device available in two versions (Large and Medium) to mechanise greenhouse facilities. The setup is basic and features a hydraulic system that manages the straddle unit with a single continuous flow from the tractor; hydraulic widening of the chassis is controlled directly by the tractor’s quick couplings. Intended for professional users who need to ...
-
Dondi - Model ECOVITIS - Single Tool-Holder For Passive Work Tools
Single tool-holder for passive work tools, characterised by tillage close to the row but that does not require straddling (e.g. mechanical ridging and/or weeding with eradication). Available in three versions (Large, Medium and Narrow) to mechanise espalier vineyards and orchards with minimum inter-row of 1.65 to 2.6 m based on the work ...