6 products found

Products

  • Tractor Power Takeoff Activated Tanker Pumps

  • Model TKM-P 20 - Tractor Power Takeoff Activated Tanker Pump

    Model TKM-P 20 - Tractor Power Takeoff Activated Tanker Pump

    Tractor power takeoff activated centrifugal pump has 2” (inch) inlet and 2” outlet and is used with tractor-back tankers for water fill-up and discharge. It is packed as shown in the picture. The tractor may be connected on a hanger rod portable trestle and used for agricultural irrigation. The gear ratios have been conveniently set and savings on fuel consumption has been secured. The rate of tractor power takeoff must be 300-350...

  • Model TKM-P 30 - Tractor Power Takeoff Activated Tanker Pumps

    Model TKM-P 30 - Tractor Power Takeoff Activated Tanker Pumps

    Tractor power takeoff activated centrifugal pump has 3” (inch) inlet and 2.5” outlet and is used with tractor-back tankers for water fill-up and discharge. It is packed as shown in the picture. The tractor may be connected on a hanger rod portable trestle and used for agricultural irrigation. The gear ratios have been conveniently set and savings on fuel consumption has been secured. The rate of tractor power takeoff must be 300-350 rpm....

  • Model TKM-P 40 - Tractor Power Takeoff Activated Tanker Pumps

    Model TKM-P 40 - Tractor Power Takeoff Activated Tanker Pumps

    Tractor power takeoff activated centrifugal pump has 2” (inch) inlet and 2” outlet and is used with tractor-back tankers for water fill-up and discharge. It is packed as shown in the picture. The difference of this pump with A56 TKM-P 20 is that, the cogwheels in use are larger. Therefore, since the power takeoff is able to operate at a rate of 540 rpm to 600 rpm, it can be used as a Fire Pump. The pressure values of such a pump, which...

  • Electro-Pumps

  • Model SLG1 - Electro-Pump

    Model SLG1 - Electro-Pump

    It is between 0.75 KW and 11 KW. These are various sized pumps, directly coupled with the electric engine. The mono-phase engine of 0.75 KW - 2.2 KW is connected as coupled to a pump with size between 1 inch and 3 inches. Sealing is secured by a mechanical gasket/joint. If so required, production is performed using a lubricated gasket. The materials used are, cast (pig) iron, rustproof steel and bronze. These are one impeller, covered-fan pumps. They...

  • Model SLG2 - Monophase Triphase Electro Pump

    Model SLG2 - Monophase Triphase Electro Pump

    It is between 0.75 KW and 11 KW. These are various sized pumps, directly coupled with the electric engine. The mono-phase engine of 0.75 KW - 2.2 KW is connected as coupled to a pump with size between 1 inch and 3 inches. Sealing is secured by a mechanical gasket/joint. If so required, production is performed using a lubricated gasket.

  • Model SLG3 - Monophase Triphase Electro Pump

    Model SLG3 - Monophase Triphase Electro Pump

    It is between 0.75 KW and 11 KW. These are various sized pumps, directly coupled with the electric engine. The mono-phase engine of 0.75 KW - 2.2 KW is connected as coupled to a pump with size between 1 inch and 3 inches. Sealing is secured by a mechanical gasket/joint. If so required, production is performed using a lubricated gasket. The materials used are, cast (pig) iron, rustproof steel and bronze. These are one impeller, covered-fan pumps. They...