FACMA s.r.l. products

The FX model is suitable for grassy mantles, runners and stones until 6 – 7 cm of diameter. Bonnet in anti-wear domex iron, structural steel with high resistance. It is a mulcher with fixed hitch, to be mounted on the three points of the rear hydraulic lift of tractors, with a power from 18 HP to 85 HP. Available also with hammer model BVE.

The BPEL model is advised for mulching grassy mantles, runners and stones until 6 – 7 cm of diameter in orchards. Bonnet in anti-wear domex iron, structural steel with high resistance. The hitch is available with manual or hydraulic side shift. Powered by tractors from 25 HP to 100 HP. BPEL/RV: the BPEL model can be built, on request, on the reversible version, to be mounted in the front of the tractor.

The model VBE is advised for mulching grassy mantles, runners and stones until 10 – 12 cm of diameter in orchards. This mulcher uses the model VPE hammer. Bonnet in anti-wear domex iron, structural steel with high resistance. The hitch is available with manual or hydraulic side shift. Powered by tractors from 25HP to 100 HP. VBE/RV: the VBE/RV model can be built, on request, on the reversible version, to be mounted in the front of the tractor.

The model BVE permits to obtain a higher grass crumbling than the model BPEL. The BVE model is advised for mulching grassy mantles, runners and stones until 6 – 7 cm of diameter in orchards. Bonnet in anti-wear domex iron, structural steel with high resistance. The hitch is available with manual or hydraulic side shift. Powered by tractors from 40 HP to 110 HP. BVE/RV: the BVE/RV model can be built, on request, on the reversibile version, it can be mounted in the front or in the back of the tractor.

The lateral offset mulcher GR/VPE is particularly suggested for cutting under-tree ridges on fruit orchards and to clean verges, banks of canals, ditches and dikes. The advantage of having a double hydraulic position allows reaching extreme angles. Moreover, the large excursion of the arm allows you to put the machine completely outside the tractor’s track, making the mulcher independent and perfectly able to follow the ground inclination. Bonnet in anti-wear domex iron, structural steel with high resistance. It is suggested for cutting grass, pruning residues and movable stones until 12 cm of diameter.

The pruning picker-up shredder COMBY is a trailed agricultural machine which is able to harvest and crumble residues of every kind of pruning. The produced models are 3: COMBY TR 140, COMBY TR 160, COMBY TR 200, with working width respectively of 140, 160 and 200 cm.

The new F8003P is a hydraulic inter-row disk, directly applicable to the tractor by the third point linkage. It is powered by the power take off and linked to the tractor hydraulic clutches. F8003P is be endowed with oil tank, pump, distributor, hydraulic clutches for the coupling and uncoupling, multiplier, kit for lateral displacement.

FACMA produces a range of trailed harvesters suitable for the mechanized gathering from the ground of hazelnuts, chestnuts, almonds, walnuts, olives, coffee, macadamias, pecan nuts, etc. The enterprise has a long experience in the manufacture and employment of these machines, whose lasting success is due to their versatility in harvesting a wide range of produces, to the simplicity of use and maintenance, to their manageability and to the capacity of adapting to the ground unevenness.

The new mechanical mounted harvester MEK 1800 permits the shell fruit harvest thanks to the principle of mechanical gathering from the ground. The machine is attachable to tractors with three point linkage both anterior and posterior, power take off of 540 r.p.m. The harvest is carried on by horizontal brushes which displace the product towards a series of augers and screens (replaceable in base of the calibre of the fruit to harvest) which make a first cleaning. In the end the product is pushed by a fan placed at the machine’s side in bags or in a trailer. On demand it is possible to install a lateral brush to harvest in the inter-row. For maximum harvesting performance, it is suggested to prepare the ground, working it different times by mulcher (grass cutting) during the previous year and before the produce falls to the ground

FACMA produces a range of self-propelled harvesters suitable for the gathering of hazelnuts, chestnuts, almonds, walnuts, olives, coffee, macadamias, pecan nuts, etc.  These machines represent a well-advanced solution for the mechanized harvest of the product from the ground by aspiration.