Fransgård Maskinfabrik A/S products

Crimper Intenso I-180 pro is Fransgård's newest machine for grass treatment. It is designed to achieve better feed quality. The crimper helps to break the wax layer on the grass, reduce drying time and decreasing nutrient loss. The machine is particularly suitable for use with a front swather, which provides good weight distribution on the tractor. At the same time, it is possible to maintain a high speed even with large volumes of material. The Intenso I-180 Pro makes a smooth, airy swath - even on the 2nd or 3rd crimp, making the job easier for the collector who has to process the material.

Fransgård's lift-suspended disc mowers are designed to work with many types of crops in both large and small quantities, and make a wide and even cut that makes it easy to process the crop. This makes the mowers a highly efficient and attractive product for both professional and hobby farmers who want functional, high-quality machines.

The simple and efficient design of the mechanical parts makes the winch very economical in operation and replacement of wearing parts. The winch has a very easy and simple operation, which means that a new user quickly becomes familiar with the operation of the winch. The steel wire is the most commonly used wear part. Its lifetime can be extended by using chains for mounting around the log. The sliding clutch ensures that the winch and tractor are not unnecessarily overloaded by pulls greater than the winch's capacity. Important! There must always be a load on the wire during winding, otherwise the loosely wound wire must be pulled out again before a new load is applied to it.

The HW-3019 is a hydraulically driven winch that can be mounted and operated from many different machines that do not have a power take-off, such as a Unimog and Bobcat. The winch can be mounted both front and rear, which increases flexibility. It is suitable for companies that regularly need to move trees quickly, for example, in the event of forest fall after a storm, to ensure road access, or simply for light forest maintenance.

The HZ series of grapple tongs from Fransgård Maskinfabrik are designed to grab and move felled or freed logs out of forest areas with tongs. Our grapple tongs are very useful, for example, when the logs are lying shoulder to shoulder after a storm. The machine is efficient for fast moving of whole or cut logs. The flexible suspension of the grapple tongs make it possible to pull logs out of hard-to-reach areas, while the boom allows the logs to be stacked.

The HZ series of grapple tongs from Fransgård Maskinfabrik are designed to grab and move felled or freed logs out of forest areas with tongs. Our grapple tongs are very useful, for example, when the logs are lying shoulder to shoulder after a storm. The machine is efficient for fast moving of whole or cut logs. The flexible suspension of the grapple tongs make it possible to pull logs out of hard-to-reach areas, while the boom allows the logs to be stacked.

This tractor mounted PELLET CHIPPER with patented 360° screen system, is intended for hand feeding, and can handle trunks up to 27 cm (10.6’’) in diameter. The two infeed rollers must be supplied with hydraulics from the tractor.

This tractor mounted PELLET CHIPPER with patented 360° screen system, is intended for hand feeding, and can handle trunks up to 27 cm (10.6’’) in diameter. The two infeed rollers are supplied with hydraulics from an integrated hydraulic pump, driven from the chipper’s main axle. The machine is built on a heavy frame, which provides the basis for a stable and reliable chipping. Each of the infeed rollers is driven by its own hydraulic motor, and the infeed speed can be adjusted steplessly to suit the current need. This in combination with the no-stress unit ensures optimal infeed ability for the task at hand.

This tractor mounted PELLET CHIPPER with 360° screen system, is intended for crane feeding, and can handle trunks up to 27 cm (10.6’’) in diameter. The two infeed rollers must be supplied with hydraulics from the tractor. The machine is built on a heavy frame, which provides the basis for a stable and reliable chipping where your work load can be facilitated by using e.g. a forest crane. Each of the infeed rollers is driven by its own hydraulic motor, and the infeed speed can be adjusted steplessly to suit the current need. This in combination with the no-stress unit ensures optimal infeed ability for the task at hand. The infeed rollers are remote controlled, which enables you to operate them at the same location as e.g. a forest crane.

This tractor mounted PELLET CHIPPER with 360° screen system, is intended for crane feeding, and can handle trunks up to 27 cm (10.6’’) in diameter. The two infeed rollers are supplied with hydraulics from an integrated hydraulic pump, driven from the chipper’s main axle. The machine is built on a heavy frame, which provides the basis for a stable and reliable chipping where your work load can be facilitated by using e.g. a forest crane. Each of the infeed rollers is driven by its own hydraulic motor, and the infeed speed can be adjusted steplessly to suit the current need. This in combination with the no-stress unit ensures optimal infeed ability for the task at hand. The infeed rollers are remote controlled, which enables you to operate them at the same location as e.g. a forest crane.