43 products found

products

  • Hay Fluffer

  • Kirchner - Swath Fluffers

    Kirchner - Swath Fluffers

    The KIRCHNER SWATH FLUFFER lifts & fluffs a swath of hay, grain, or other crops, so that air gets under the swath to dry or cure it faster. This cuts the number of days or hours between cutting, baling and harvesting.

Products by Landoll Corporation

  • Brillion - Model 2-Bar & 3-Bar - Mounted Chisel Plow

    Brillion - Model 2-Bar & 3-Bar - Mounted Chisel Plow

    The Brillion Chisel Plow is the foundation tillage tool that brought Brillion into the primary tillage business.  The Chisel Plow is a very basic, economic implement that in many cases has been the primary tillage tool of choice due to excessive residue, rocks, and stones.  These tools started the “Conservation Tillage” movement in American agriculture.

  • Brillion  - LandCommanderIII

    Brillion - LandCommanderIII

    The Brillion Land Commander® III is a conventional Disc/Ripper/Disc style of primary tillage tool that was designed from customer feedback that dates back into the 1990s.

  • Brillion - Model Series IV - Compaction Commander

    Brillion - Model Series IV - Compaction Commander

    The Compaction Commander Series IV is part of the primary tillage tool category.  It is an in-line deep tillage machine equipped with parabolic style auto-reset shanks.  The Compaction Commander is available in sizes from three shanks to nine shanks.

  • Brillion - Zone Commander

    Brillion - Zone Commander

    The Brillion Zone Commander is a compaction management tool designed to address soil compaction issues within the growth profile in a controlled manner in a defined area.  Designed from the ground up to meet the requirements of compaction control with minimal surface disturbance, the Zone Commander has developed the reputation of being a very reliable machine that has the ability to work in unknown soil profiles without failure or downtime.

Products by Worksaver Inc.

  • Land Management Equipment

  • Model SSMB - Rotary Brooms

    Model SSMB - Rotary Brooms

    Performance driven rotary brooms for use by contractors, municipalities, institutions, and farmers . Remove dirt, sand, gravel and trash from construction entrances, parking lots, bridges, driveways and sidewalks. Remove thatch and prepare turf for the growing season. Clean snow or leaves from streets, driveways, and building entrances. Excellent for general clean up before sealing or repairing pavement.

  • Model SSGB-8B - Skid Steer Grader Blade

    Model SSGB-8B - Skid Steer Grader Blade

    The patented SSGB-8B Grader is designed to be used by asphalt, landscaping, and concrete flatwork contractors. The unit has an 8-foot, six-way hydraulically controlled moldboard operated by an in-cab remote.

  • Bale Handling Equipment- Bale Spears

  • Model BSF-1523 - 3-PT Bale Spears

    Model BSF-1523 - 3-PT Bale Spears

    3-pt. spear for handling round bales up to 1,800 lbs. Tapered main spear has useable length of 44” with two welded balance spears. Fits Cat I/II hitches (shipped with 7/8” pins)

  • Model HS-2200 - 3-PT Bale Spears

    Model HS-2200 - 3-PT Bale Spears

    Rated for round bales up to 2,200 lbs. Bolt-in forged spear with 42” usable length. Two welded balance spears. Cat. I/II Quick Hitch compatible (shipped with 7/8” pins).

  • Bale Handling Equipment- Bale Unroller & Handler

  • Model HHU-2045 - 3-Pt. Hey Bale Unroller & Handler

    Model HHU-2045 - 3-Pt. Hey Bale Unroller & Handler

    3-pt. Hay Handler / Unroller. Rated at 2,2000 lbs. Designed for round bales either 4' or 5' in width and up to 6' in diameter. Unit requires a 2.5' x 8' cylinder and hoses  (not included). The HHU-2045 now comes with a parking stand for allowing easy hook up with a Quick Hitch.

  • Material Handling

  • Model FLGR - Split Top Grapple Rake

    Model FLGR - Split Top Grapple Rake

    Designed for today’s modern skid steer and tractor front loaders. Available in 62” or 77” width, the split top design provides dual upper grapples for picking up brush and other debris while leaving the dirt behind. Ideal for loading logs, orchard prunings, piling brush and moving hard to handle materials.

  • Fence Building Equipment

  • Model HPD-16/22Q - Manual Adjust 3-Pt Hydraulic Post Drivers

    Model HPD-16/22Q - Manual Adjust 3-Pt Hydraulic Post Drivers

    The HPD-16/22Q models with manual adjust quickly delivers a tight post set for wood or steel posts. Base model offers manual adjustment cranks and bubble level for perfect vertical alignment on flatland or hillsides. Transport lock pin secures unit for travel and storage. Greaseable pivot points provide reliable movement of the driver.

  • Model HPD-16/22Q/26Q SHC - Hydraulic Adjust 3-pt Hydraulic Post Drivers

    Model HPD-16/22Q/26Q SHC - Hydraulic Adjust 3-pt Hydraulic Post Drivers

    Designed and engineered for those who have serious fencing to do. These center mounted units offer all the quality features of the basic HPD-16 & HPD-22Q plus effortless hydraulic driver alignment controlled by two 3” x 6” hydraulic cylinders. For increased driving force, the heavyduty HPD-26Q SHC delivers 110,000 lbs. of high-impact force for driving large posts in tough soil conditions. Big-foot stabilizer helps control tractor...

Products by Besler Industries, Inc.

  • Bale Loaders

  • Besler - Model 2000 - Bale Loader

    Besler - Model 2000 - Bale Loader

    The model 2000 is designed to mount on about any flatbed and it will allow you to move and feed hay with the truck and flatbed that you already own. Installing the model 2000 on a flatbed usually takes 2-4 hours. The low profile allows you to use the fifth wheel ball on your flatbed without having to raise it up higher than normal. For 'controlled feeding,' the Besler bale bed loader is the ticket. Unroll only the amount of hay needed, then move on to...

  • Besler - Model 3000 Series - Bale Loader

    Besler - Model 3000 Series - Bale Loader

    The double rotor rolling stalk chopper is a versitile tool with applicatons in most farming practices, from ridge-till to conventional farming. With no gearbox or U-joints to maintain, this low-maintenance tool will provide years of dependanble service.The proven Model 5400 is an aggressive Stalk Chopper. The 5400 has welded angled rotors set at a severe angle.

  • Tillage Equipment

  • Besler - Two Ground Driven Rolling Baskets

    Besler - Two Ground Driven Rolling Baskets

    The two ground driven rolling baskets will break up the clods and knock down esisting stalks to provide a smooth level surface. This is an excellent alternative to a conventional harrow. It eliminates leaving bunches or piles of stalks allowing for quicker decay

  • Besler - Model 2000 - Root Slicer

    Besler - Model 2000 - Root Slicer

    The Root Slicer is ideal for pre-plant seed bed preparation in a variety of crops such as corn, milo and sunflowers. It can be adjusted to cut the root crown from the ground allowing minimum till farming with little ground disturbance. Low tractor horsepower, and high-speed operation allows for quick and efficient ground preparation. Recommend speed of 8-12 mph.

  • Besler - Model 2800 - Cotton Puller

    Besler - Model 2800 - Cotton Puller

    The Cotton Stalk Puller is ideal for the removal of Cotton Stalks. It can be adjusted to pull or cut the cotton stalk from below the surface of the ground. The rolling basket on the floating parallel linkage will level the seed bed and help incorporate the cover crop. This allows the farmer to minimum till with little ground disturbance in a one trip operation.

  • Besler - Model 4000 - Sub-Soiler

    Besler - Model 4000 - Sub-Soiler

    The Besler Sub-Soiler is designed to help recapture productivity lost to soil compaction. Built tough to deliver exceptional results even under the most demanding conditions, the Besler Sub-Soiler will effectively break up hard pan and reduce soil compaction while minimizing the introduction of clods or slicks. Some degree of compaction results from every farming task. The Besler Sub-soiler will help reduce run off resulting in the retention of...

  • Besler - Model 4500 - Ripper

    Besler - Model 4500 - Ripper

    The Ripper is designed to help recapture productivity lost to soil compaction with minimal surface soil disturbance. It will fracture and lift the ground to effectively break up the hard pan and reduce soil compaction of clods. This will help reduce run off resulting in retention of expensive chemicals, fertilizer and irreplaceable top soil.

  • Besler - Model 6000 - Chop-N-Slicer

    Besler - Model 6000 - Chop-N-Slicer

    The Chop-N-Slicer will chop stalks, remove the root crown and prepare the seed bed for planting with one pass through the field. This ground driven machine with high speed capability will save time and money when preparing the ground for planting.

  • Besler - Model 7000 - Stalk Chopper

    Besler - Model 7000 - Stalk Chopper

    The Model 7000 is a double rotor rolling stalk chopper. It is a versatile tool with applications in most farming, practices, from ridge-till to conventional farming. With no gearbox or U-joints to maintain, this low-maintenance tool will provide years of dependable service. Designed for versatility, the 7000 Series Stalk Chopper features different rotor angle adjustments. Select from straight, medial or severe angle.  

Products by Burchland Maufacturing, Inc

  • Model GSX Series - Grain Shuttles

    Model GSX Series - Grain Shuttles

    The GSX Series Grain Shuttle is a portable drive over hopper designed to make unloading grain trailers into a bin quick and easy. Designed for farmers with multiple bin sites, the GSX Series Drive over hopper is quick and easy to transport. The Drive over hopper can be towed behind a tractor or a pickup and quickly lowered to the ground for operation. Spring assisted ramps make set-up and transport a one person operation. The low 7 3/8' deck of the...

  • Burchland - Corn Detasseling Head Trailer

    Burchland - Corn Detasseling Head Trailer

    The Burchland Corn Detasseler Head Trailer is designed for storage and transport of Hagie corn detasseling heads. This head trailer replaces cumbersome stands and is ideal for operators of Hagie combo units with more than one attachment. The Corn Detasseler Head Trailer provides a big advantage over stands by adding the ability to move the head after it is mounted on the trailer. With a Hagie Corn Detasseler Head Trailer, the head can be removed from...

  • Model SCX - Straw Crimper

    Model SCX - Straw Crimper

    Burchland’s ALL NEW SCX Straw Crimper lets you say good-bye to poorly secured, uneven straw mulch installation due to rocks, roots, stumps and even sidewalks. Why? Because each SCX mulch crimper disc can pivot left and right and up and down independently from each other which is a big advantage over other straw crimpers.

  • Gravel - Model GBX - Wear Bars Box

    Gravel - Model GBX - Wear Bars Box

    Burchland Mfg. Gravel Boxes will add efficiency to your job site. These bedding material containers are real stone savers, helping to reduce waste and increase speed on the job site. Standard GBX gravel boxes are built heavy and built to last. They are made to handle the abuse that an excavator can dish out. Floors and ends are built with ½” plate. Tear strips on the floor increase strength and help prevent wear. Formed wear strips on the...

Products by Gandy Company

  • Row Crop Herbicide/Pesticide Applicators

  • Gandy - Model P451-R - Poly Cam Gauge One Outlet Applicator

    Gandy - Model P451-R - Poly Cam Gauge One Outlet Applicator

    45-lb. capacity natural color (see-through) row crop applicator with matching lid allows operator to visually gauge remaining product in the hopper. To keep the elements out, a weather-tight lid is held securely in place with two latch straps. Package consists of poly hopper with a one outlet bolt-on stainless steel bottom and slide, resilient rubber rotor bar, 'U' frame bracket with 1/2' pre-drilled holes and slots for surface mounting....

  • Gandy - Model P452-R - Poly Cam Gauge Two Outlet Applicator

    Gandy - Model P452-R - Poly Cam Gauge Two Outlet Applicator

    45-lb. capacity natural color (see-through) row crop applicator with matching lid allows operator to visually gauge remaining product in the hopper. To keep the elements out, a weather-tight lid is held securely in place with two latch straps. Package consists of poly hopper with a two outlet bolt-on stainless steel bottom and slide, resilient rubber rotor bar, 'U' frame bracket with 1/2' pre-drilled holes and slots for surface mounting....

  • Multi-Purpose Fertilizer/Chemical/Seed Applicators

  • Gandy - Model 09PDMS - 100-lb. Capacity Multi-Purpose Poly Stainless Applicator

    Gandy - Model 09PDMS - 100-lb. Capacity Multi-Purpose Poly Stainless Applicator

    Gandy's 2.3 cu. ft. Poly Stainless Multi-Purpose hopper allows you to apply fertilizer, granular chemical, seed and small grains. The 120-lb. capacity hopper (60-lbs. per cu. ft. capacity) includes four each: full-rate black metering wheels for granular chemicals and small seeds like alfalfa, canola, etc.; red metering wheels for fertilizer and small grains such as oats, wheat, barley and rice; yellow high-output metering wheels for...

  • Gandy - Model 09PDMSLL - 100-lb. Capacity Multi-Purpose Poly Stainless Applicator

    Gandy - Model 09PDMSLL - 100-lb. Capacity Multi-Purpose Poly Stainless Applicator

    Gandy's 2.3 cu. ft. Poly Stainless Multi-Purpose hopper allows you to apply fertilizer, granular chemical, seed and small grains. Applicator comes complete with Lock 'n Load valve. The 120-lb. capacity hopper (60-lbs. per cu. ft. capacity) includes four each: full-rate black metering wheels for granular chemicals and small seeds like alfalfa, canola, etc.; red metering wheels for fertilizer and small grains such as oats, wheat, barley...

  • Forage and Feed Additive Applicators

  • Gandy - Model P451WP12 - 45 Lb. Feed/Forage Additive Applicator

    Gandy - Model P451WP12 - 45 Lb. Feed/Forage Additive Applicator

    45 lb. capacity applicator precisely delivers ingredients to preserve or fortify feedstuffs. Hopper is translucent allowing the operator to easily check on the remaining volume. Includes a single-outlet bolt on stainless steel bottom and slide with a straight spout and a precision cam gauge to regulate the openings in the bottom to apply the recommended rate for your individual operation. For internal agitation an 8' resilient rubber rotor bar comes...

  • Gandy - Model 09PC04WP12 - 100 Lb. Feed/Forage Additive Applicator

    Gandy - Model 09PC04WP12 - 100 Lb. Feed/Forage Additive Applicator

    100 lb. capacity applicator precisely delivers ingredients to preserve or fortify feedstuffs. Hopper is translucent allowing the operator to easily check on the remaining volume and the cover is a reflective silver lid with latch straps. Includes a four-outlet bolt on stainless steel bottom and slide with straight spouts and a precision cam gauge to regulate the openings in the bottom to apply the recommended rate for your individual operation. For...

  • Talc Applicators

  • Gandy - Model P45TALC12 - 45 Lb., Capacity Talc Applicator

    Gandy - Model P45TALC12 - 45 Lb., Capacity Talc Applicator

    Specially designed 45-lb. capacity hopper with an adjustable slotted bottom provides uniform application across the hopper's width - making it ideal for use with powdery materials or products that require extra agitation to flow readily such as talc. The metering system features a central fluted rotor with two additional agitators placed above it. At the bottom, the slots with their angled overlapping design provide even dispersion across...

  • Gandy - Model 09008961 - 100 Lb., Capacity Talc Applicator

    Gandy - Model 09008961 - 100 Lb., Capacity Talc Applicator

    Extra large 2.3 cu. ft. capacity hopper with an adjustable slotted bottom provides uniform application across the hopper's width - making it ideal for use with powdery materials or products that require extra agitation to flow readily such as talc. The metering system features a central fluted rotor with two additional agitators placed above it. At the bottom, the slots with their angled overlapping design provide even dispersion across the...

Products by Kelley Manufacturing

  • 12-19 HP Tractors- Backhoe

  • Model B600  - Backhoe

    Model B600 - Backhoe

    The B600 is great for daily use around the house or on the job site. This unit provides your with a 6’6” digging depth. It will work best on the back of a tractor 12-35 HP. This unit has been designed to operate at a flow rate of 4 to 6 GPM. There are many options to choose from for the backhoe. The bucket sizes range from 9”-15”. There are different color options. They include: Red, Green, Black, Blue, and...

  • 20-35 HP Tractors- Backhoe

  • Model B750  - Backhoe

    Model B750 - Backhoe

    The B750 is great for daily use around the house or on the job site. This unit provides your with a 8’0” digging depth. It will work best on the back of a tractor 20-45 HP. This unit has been designed to operate at a flow rate of 4 to 6 GPM.

  • 50-60 HP Tractors- Backhoe

  • Model B60  - Backhoe

    Model B60 - Backhoe

    The B60 is great for daily use around the house or on the job site. This unit provides your with a 10’6” digging depth. It will work best on the back of a tractor 50-150 HP. This unit has been designed to operate at a flow rate of 8 to 12 GPM.

  • 61-150 HP Tractors- Backhoe

  • Model B70 - Backhoe

    Model B70 - Backhoe

    The B70 is great for daily use around the house or on the job site. This unit provides you with a 12’6” digging depth. It will work best on the back of a tractor 60-150 HP. This unit has been designed to operate at a flow rate of 8 to 12 GPM.

Products by Cole Planter Company

  • Cole Planter - Model 100 - McNifty Gravity Flow

    Cole Planter - Model 100 - McNifty Gravity Flow

    The McNifty Gravity Flow 100 is a 100 lb gravity feed fertilzer attachment. Gravity flow design, Automatic cut 0ff, Readily mounts to most cultivators, No moving parts, Holds 100 lbs. of fertilizers, Screen assures uniform application, Accurately applies up to 300 pounds per acre, Boot for spout attaches to tines to accurately place fertilizer, Rate of application adjustable, Designed and built with over 100 years experience.

  • Cole Planet Jr - Vegetable Drill

    Cole Planet Jr - Vegetable Drill

    Accurately meters hard-to-handle seeds in continuous drill, including tomatoes, onions, sugar beets, cabbage, lettuce, spinach, etc. Special seed plates for multi-row applications are also available.

  • Cole Planter - Model 12 MX - Multiflex

    Cole Planter - Model 12 MX - Multiflex

    Precision planting/fertilizer units. 1, 2 and 4 rows for small acreage and gardens. Split-rim, concave cast iron presswheel firms seedbed, but leaves loose zone directly over seeds.