Glendale Farm Services

12 products found


Products by Philip Watkins Ltd

  • Cultivation Equipment

  • Tined Cultivators

    Tined Cultivators

    We manufacture a range of tined cultivators from light spring tines to heavy duty ripper tines both in mounted and trailed options. 4m Ripper with 15 legs, optional level boards and packer. 6m Spring Tine. Complete with eradicator tines, front and back level boards, 4 rows of spring tines and following harrow. 5m cultivator complete with 2 rows rigid shear bolt tines, Hydraulic level board, Tyre roller, 3 rows spring tines, Harrow, Gutler 560mm roller...

  • Quad-till - Model 5m  - Trailed Cultivator

    Quad-till - Model 5m - Trailed Cultivator

    A natural progression from the trailed press and sub-soilers, the Quad-Till has been developed to achieve a one pass cultivation system to reduce establishment costs. 5m Quad-Till - Hydraulic Fold to 2.95m, Front Depth Wheels, 2 Rows 510mm Discs (Sealed Bearings) (approx 75mm 3” deep), 9 Auto Reset Legs in V Formation (Hyd in/out of work) , Up to 15” 380mm Deep, Floatation Wheels, Hydraulic Brakes, 2 Rows VF Tines, Hyd in/out of work...

  • Quad-Till - Bespoke Cultivator

    Quad-Till - Bespoke Cultivator

    We are now offering this service for the customer who requires a machine to suit a specific task or land type. The modular layout of the chasis enables us to fit almost any cultivation element, be it tines, discs, rollers or any other item. We can also include various broadcasting or drilling equipment as required. 6m Quad-Till with Front Depth Wheels, 2 rows of 600mm Discs, 9 Sub Soil Legs 2 rows of Vibro Flex Tines, Level Board, 2 rows of 600mm DD's...

  • Loader Attachments

  • Bale Handling Equipment and Muck Forks

    Bale Handling Equipment and Muck Forks

    We can supply almost any attachment from a single bale spike to 4 metre muck/grass forks. Photographed is a small selection of what we manufacture. High capacity fork. Under 3m wide in transport position. Unfolds to a width of 4.6 metres. 4 tine extending bale spike with hydraulic extending back frame and folding tines. Wrapped bale grab suitable for square and round, heavy duty construction will lift 2 square bales, can lock off either side for...

  • Loader Attachments

    Loader Attachments

    Backplates, to convert any loader or teleporter to your chosen brackets. Shown left is a Cat Backplate on Quicke Loader and right a Matbro Backplate on Quicke Loader. Vari Width Bag Lifter. 700mm – 1100mm Centres of Tines. Adjustable from cab. To lift 4 x 600/4 x 500 or 2 x 1T. Follow our You Tube link to see this in action.

  • Trailers

  • Flat Trailers

    Flat Trailers

    A full range of flat trailers are available as balanced drawbar, artic and low loaders. 32 foot flat trailer c/w sprung drawbar and hydraulic brakes. 28 foot trailer with hydraulic raise/lower optional potato step. 25 foot flat trailer complete with tilting bed, pull out ramps, sprung draw bar and 340x18 Michelin wheels. 32’ Flat Trailer, 8’ 2” wide, 16T capacity. Complete with, 10 stud twin commercial axles, 385x22.5 wheels,...

  • Tipping Trailers

    Tipping Trailers

    Although we do not make a standard range of tipping trailers, we specialise in the bespoke trailer - if you require a large number of options or a specific body size we can build a trailer to suit your exact requirements. Pictured above and below, 16 foot tipping trailer with 20 tonne parobolic spring set, commercial axles, 620/50x22.5 vredestein high speed wheels, air brakes, hydraulic back door, grain chute, sprung drawbar, mudguards, full hgv...