15 products found

products

  • Arbro - Model 400 & 1000 - Stroke Harvester Head

    Arbro - Model 400 & 1000 - Stroke Harvester Head

    Arbro-Stroke is a stroke harvester, which fells, delimbs and cuts trees to length.  Arbro-Stroke harvester is available in two models that can be easily installed on a standard loader. Arbro-Stroke 400 is especially meant for thinning operations and Arbro-Stroke 1000 can also handle bigger tasks. Compared to other same size harvester heads the Arbro-Stroke has a lot of delimbing power.  Arbro-Stroke can easily be connected and disconnected...

  • Arbro  - Model 275R & 375R  - Roller Harvester Head

    Arbro - Model 275R & 375R - Roller Harvester Head

    The Arbro Roller harvester series is a new concept in tree harvesting. Now available in two different models from the light weight 275R to the larger 375R model. Fell, delimb and cut to length. The 275R can be mounted on a loader attached to a farm tractor. The 275R harvester is ideal for first thinnings. The machine is capable of doing 9.5'' trees. The 375R can cut 12.6'' trees. All the harvesters are easy to use and service. The harvester head has a...

  • Model PETE PV-3 WINCH - Skidding Winches

    Model PETE PV-3 WINCH - Skidding Winches

    Pulling capacity of 3,000 kg (6,600 lbs). Winch is sold with a 50 m (164 ft) long 8 mm (5/16 in) cable. Winching speed 0.6 to 1.15 m/s (2 to 3.8 ft/s). Weight 270 kg (595 lbs). Mounts to category II 3-point hitch. Recommended tractor size is 30 kW (40 HP). Dimensions LxWxH 0.67 x 1.10 x 1.83 m or 38 x 43 x 72 in Protective screen 0.96 x 0.67 m or 38 x 26 in. Strong winch housing. Net protects tractor cabin in case the cable breaks. Safety brake...

  • PALAX  - Model 60  - Firewood Processors

    PALAX - Model 60 - Firewood Processors

    The PALAX series offers new top of the line firewood processors - Palax 55, Palax Combi MII, Palax Active, Palax KS35 Ergo, Palax KS35S (Joystick), Palax KS40 Ergo, Palax KS40S (Joystick), Palax KS45S (Joystick), Palax Power90S (Joystick), Palax90SG (Joystick) and Palax Power100S (Joystick). Also some of the models are available with a booster to speed up the splitting. Sturdy structure, good design, easy to transport, automatic high-speed valves,...

  • NOKKA  - Model 1200 - Timber Grabs

    NOKKA - Model 1200 - Timber Grabs

    NOKKA Timber Grabs are an economical and efficient forwarding tool for thinning or harvesting firewood. Large bundles can be forwarded due to the wide opening of the grapple and a fair clearance between the grapple and the slew joint. Great grapple force, supports between the grapple and the mounting frame and the optional tooth bar in model Super holds longer stems and bundles tight in the grapple. Wide 90?slewing angle helps skidding long logs and...

  • NOKKA Grapple Loaders ...  - Model HK Series - Grapple Loaders

    NOKKA Grapple Loaders ... - Model HK Series - Grapple Loaders

    Grapple Loaders are efficient and strongly built equipment for use all year round. Due to many available mounting alternatives, wide ranges of accessories and versatile operating features, the Nokka grapple loaders are well suited for various loading and lifting tasks on different kinds of base machines.

  • MERI  - Model MJ - Crusher

    MERI - Model MJ - Crusher

    Amazing how MERI crusher grinds almost anything from small trees, stumps and branches with its extra hard carbide teeth. The crusher has low power demand compared to its crushing capacity. The crusher is able to crush up to 25 cm (10 inches) below ground level depending on the model. The design of the crusher is module-based so you can choose the right equipment for your specific needs. The MERI crusher is equipped with a built-in safety clutch that...

Products by Aimo Kortteen Konepaja Oy

  • Murska Mills

  • Murska  - Model 1000 - Crimping Mills

    Murska - Model 1000 - Crimping Mills

    A larger model in the HD range, the 1000 HD looks the same as the 700 HD and has the same technical specifications, but it is equipped with longer rollers and a larger elevator tube. Crimping capacity for wet grain is approximately 15 t/h. The efficient operation of the Murska 1000 HD requires an 80-90 hp tractor. The mill is capable of milling almost 30 t/h of dry grain with 2 mm grooved rollers. The Murska 350-1000 mills may be fitted with a...

  • Murska  - Model 1400 - Crimping Mills

    Murska - Model 1400 - Crimping Mills

    The Murska 1400 S 2x2 is equipped with a unique roller cassette, driven by four gears, achieving a crimping capacity of up to 20 t/h. The tractor power requirement is 140 hp. The mill has an air-spring transport chassis, enabling quick changes between work locations. Standard equipment includes hydraulic elevator tilt, working lights and a tool box. The Murska 1400 S 2x2 is an ideal machine for crimping large quantities of feed grain in a short space...

  • Murska  - Model 2000 S2x2 - Crimping Mills

    Murska - Model 2000 S2x2 - Crimping Mills

    The technical specifications of the Murska 2000 S 2x2 are the same as for its smaller version, the 1400 S 2x2, but with enhanced crimping capacity of 30 t/h. This is usually enough for even the busiest farmer or contractor. A wise choice, if time is of the essence.

  • Murska  - Model 350 - Crimping Mills

    Murska - Model 350 - Crimping Mills

    The mill has three-point linkage and it is generally powered by a tractor. Power requirement is 30-40 hp, and 15 kW with an electric motor. Wet grain crimping capacity is 5 t/h, while with dry grain it is 3-10 t/h, depending on the roller surface.

  • Murska  - Model 700 S2 - Crimping Mills

    Murska - Model 700 S2 - Crimping Mills

    The smallest HD model is the Murska 700 HD, which is excellent on medium-sized and slightly larger farms. The mill incorporates gear- driven specially hardened rollers, which will crimp millions of kilos of feed grain. Wet grain capacity is 10 t/h, while with dry grain it is 8-20 t/h, depending on roller surface. Tractor power requirement is 70-80 hp.

  • Murska  - Model W-Max 10 - Crimping Mills

    Murska - Model W-Max 10 - Crimping Mills

    The Murska W-Max 10 Contractor is designed for use by contractors. This model is equipped with a bagger. The capacity is well sufficient for field work with two combine harvesters equipped with ca. 4 m cutter bars. The Murska W-Max 10 Farmer is designed for use on a single farm. It incorporates a three-point linkage. The mill has the same capacity as the 10 C.

  • Murskabio

  • Murska  - Tube Composting Bio Packer

    Murska - Tube Composting Bio Packer

    Tube composting is an environmentally friendly way to transform manure into nutritious full soil. Air exchange by ventilators and the heating effect of black plastic foil will intensifycomposting in the tube. The mass is reduced by about one third and it becomes hygienic, homogenous and inodorous.