Products and Equipment from Hankins Engineering Ltd on Agriculture XPRT

Maidwell - Single Leg Mounted Moler

To suit 150 - 250hp tractors. The single leg mounted machine has long beams with four hitch hole settings for different makes of tractor, the tractor needs to be hitched in the lowest hole as possible to pull the weight down onto the tractor for grip. It also has a swing arm onto the top-link to let the moler run freely over uneven ground and alter the angle of the mole when coming to lift out of the ground to guide the moler out smoothly.

Maidwell - Single Leg Trailed Moler

To suit lower hp crawlers or 200hp+ wheeled tractors The single leg trailed is the same design as the mounted version with shorter beams to ease pulling because of the drawbar length. The machine has a hydraulic drawbar and lifting wheels to guide the moler in and out the ground smoothly. The weight cant be transfered onto the tractor as much with a drawbar machine which is why it would need a higher hp tractor to pull it and is better suited to a...

Maidwell - Model 2m and 2.6m Spacing - 2 Leg Mounted Moler

To suit 300hp+ tractors and crawlers. The twin leg mounted Is based on the same principle as the single leg with the 4 hitch holes and swing arm top-link. But it runs on beams untill about a third of the lengh of the machine and then runs on wheels the back to ease pulling as no beam around the leg. Weight can be added to the front of the moler, this and the 4 hitch holes will help to pull the tractor down for grip. Also can be used as a single leg if...

Maidwell - Model 2m and 2.6m Spacing - 2 Leg Trailed Moler

To suit 350hp+ crawlers and 400hp+ tractors. The twin leg trailed has long beams running through to the back it has a hydraulic drawbar and lifting super single wheels to guide the moler in and out the ground smoothly. Also can be used as a single leg if can't pull 2 and the machine has a 3.2m transport width.

Maidwell - 3 Leg Trailed Moler

To suit 500+ crawlers. The Tri-Mole has a hydraulic drawbar and lifting wheels to guide the moler in and out the ground smoothly. This machine is 6m wide in work in which the outer wings are independantly fully floating to guide over any uneven ground. The outer wings fold up vertically to 3m for transport.