11 products found

Products

  • Spader

  • IMANTS

  • Sandy Loam - Model 32S - Rotary Spader

    Sandy Loam - Model 32S - Rotary Spader

    The Imants 32 series spader is an ideal spading machine for smaller areas and smaller tractors. The spader is suitable for sand, loamy and light clay soils (recommended without crumbler roller on clay soils). The 32 series spading machine is a nicely compact and versatile spader that can be applied in many sectors. The machines can be fitted with a crumbler roller. So the primary tillage (spading) can be combined to make a seed bed.

  • IMANTS  - Model 32 Series - Small Spading Machine

    IMANTS - Model 32 Series - Small Spading Machine

    The small spading machine is more suited to use in conditions where spread is less important, but where the quality of the spading work counts, which is why a spade without a side twist is used. The machine is available with or without a rotary tiller. The spading machine is excellent for use in glasshouses in the narrow spacesbetween the posts, in tree nurseries, for market gardeners and horticulturists. It is also the ideal spading machine for...

  • IMANTS - Model 47 Series - Rotary Spader

    IMANTS - Model 47 Series - Rotary Spader

    The Imants rotary spader is a power take off (pto) drive machine, this action results in a cultivator which literally powers itself through the soil. The advantage of this system is the absolute minimal risk of wheel slip or smearing under wet soil conditions. The ability to mix and blend, is a huge advantage when it comes to incorporating stubble and previous crop residues, as well as large quantities of compost, slurry, manure and...

  • Sandy Loam - Model 27SX Series - Spading Machines

    Sandy Loam - Model 27SX Series - Spading Machines

    Spading machines for sandy/loamy soils. The 27SX and 33SX series are compact and uncomplicated spading machines used in many industries. The machines can be fitted with a crumbler roller. So the primary tillage (spading) and secondary tillage (seedbed preparation)   can be done in one pass.

  • Model 33SX Series - Spading Machines

    Model 33SX Series - Spading Machines

    The new 33SX spading machine with the new Imants design! A very good machine for  light soil and tractors between 60 and 90HP. The working depth is 15 till 30cm. And the working with is available in 210cm and 250cm. The spadingmachines are the ideal solution for saving time and money by reducing the number of tillage steps and compaction. It is also the perfect soil-building tool, with its unique ability to shatter hardpan and aerrobically...

  • Sandy Loam - Model 38SX Series - Spading Machine

    Sandy Loam - Model 38SX Series - Spading Machine

    Efficiency and perfection in a single machine! Tilling can now be performed quickly and easily and a high yield per hectare achieved. Imants has designed a spading machine that can compete in all areas with other kinds of tilling on sand and light to loam to loess-like soils. The 38SX spading machine makes spading achievable for everyone.

  • Sand - Sandy Loam - Model 48SX series - Rotary Spading Machines

    Sand - Sandy Loam - Model 48SX series - Rotary Spading Machines

    A totally new concept in rotary spading machines for sandy and light clay soils. The 48SX machine is faster, lighter and stronger than its predecessor. The latest changes means spading becomes even more attractive as the machine is also equipped with a seedbed preparator. Simultaneous primary and secondary tillage. In combination with a drill or a planter cost reductions are even greater.

  • JNC Rebel Rotovator

  • Model Serie L and OTL <35HP - Rotovator

    Model Serie L and OTL <35HP - Rotovator

    Over the years, the JNC rotovator has built up a reputation as a quality machine. Unique because of its centre drive, it cannot be compared with other cultivators fitted with a side drive. The transmission gear box in the middle of the rotovator provides a robust and direct, virtually maintenance free drive. There is no need for a chain case on the side, and the machine width is more or less the working width as a result. The rotovator is therefore...

  • Model Serie Z and OTZ <70 HP  - Rotovator

    Model Serie Z and OTZ <70 HP - Rotovator

    Over the years, the JNC rotovator has built up a reputation as a quality machine. Unique because of its centre drive, it cannot be compared with other cultivators fitted with a side drive. The transmission gear box in the middle of the rotovator provides a robust and direct, virtually maintenance free drive. There is no need for a chain case on the side, and the machine width is more or less the working width as a result. The rotovator is therefore...

  • Turfcare Machinery

  • Imants Greenwave  - Linear Decompactor

    Imants Greenwave - Linear Decompactor

    The Imants GreenWave is a compact, lightweight, tractor mounted linear decompactor for  fine turf areas. Ideal for compact tractors of around 24-30hp, the GreenWave is designed for relieving compaction to a depth of 150mm, using 8mm thick, forged steel blades. The GreenWave uses the tried & tested 'Shockwave' principal to shatter sub-surface compaction with little or no disruption to the playing surface and no additional clean-up. Suitable...

  • Tillage Tools

  • Model 3.0  - Culter

    Model 3.0 - Culter

    Spading and subsoiling in a single operation!. Out in the field, there is a need for a cultivator that can easily be combined with a spader at low cost and with less tractive force. It has been found in practice that compaction occurs deeper than the surface soil under some conditions. You want to break up this often poorer subsoil but not to mix the surface soil. It is important to create so-called “cracks” so that air and plant roots can...