JAGODA JPS

9 products found

Products

  • Berry Fruits Harvesters

  • ARONIC- JAREK  - Model 3  - Chokeberry Harvester

    ARONIC- JAREK - Model 3 - Chokeberry Harvester

    Harvester JAREK 3 is available also in a version designed for harvesting chokeberries and is called ARONIC. This version is equipped in one strewer with an increased energy of vibrations and adjusted crop engaging runners. Like JAREK 3 Harvester ARONIC also harvests fruit from one side in a row during one pass. It should be driven by an agricultural tractor with minimum power of 20 kW (approximately 30HP) and the possible low work speed.

  • JAREK  - Model 5  - Currant Harvester

    JAREK - Model 5 - Currant Harvester

    JAREK 3 is a deeply modernized version of the AREK harvester. For many years, this machine was developed and produced by the Department of Experimental Mechanization of Horticulture, at the Institute of Pomology and Floriculture in the city of Skierniewice. The improved in twenty years technology used during the production of hundreds of combine harvesters let us be sure that the machines manufactured by our company are effective and reliable....

  • Mowers, Slashing Mowers

  • JAGODA - Model 1,6 m / 1,8 m - Orchard Mower

    JAGODA - Model 1,6 m / 1,8 m - Orchard Mower

    Orchard mower JAGODA is produced in version 1,6 (1,6 meters of working width). Version 1,8 (1,8 meters of working width) is produced on request. These are the most popular models, perfect for both orchards and berry fields. The body is made of stainless metal. The cutting element is in fact a set of four rotating blades and one blade installed on the side of the body. It allows grinding of mown mass and also grinding of branches up to 30 millimeter...

  • MATYLDA  - Model 2,9  - Mower

    MATYLDA - Model 2,9 - Mower

    Working width of MATYLDA 2,9 mower is 2,90 meters. The body is made of stainless metal. The cutting element is a set of three rotating rotors, each with two blades. The machine is hung on a three point hitch and powered by a telescopic joint shaft from tractor's power transmission shaft. The mower is installed symmetrically to the tractor’s axis. . The height of mowing is regulated by a rare supporting shaft and a tractor’s hydraulic...

  • AGATKA Plus - Model 1,15 m - Mower

    AGATKA Plus - Model 1,15 m - Mower

    1,15 meter wide orchard mower AGATKA PLUS is destined for mowing and grinding simultaneously. It may be used to mow grass and weed in orchards, parks, gardens, berry fields etc. It has a plain and strong construction and an unfailing performance. The mower is hung on a three point hitch (category 1 or 2) and powered by a telescopic joint shaft from tractor's power transmission shaft.

  • Other Products

  • FORMER - Currants Cutter

    FORMER - Currants Cutter

    Currant bushes cutter FORMER of our production is destined for cutting (forming) rows of bushes into a letter V. It facilitates the harvesting of fruits and cutting which is the most labor-consuming stage. Cutting out the browses from within the bushes must be done manually.

  • TEKLA - Herbicide Joist for Berry Bushes

    TEKLA - Herbicide Joist for Berry Bushes

    Our herbicide joist is designed for fighting against weed under the bushes on currant, gooseberry and chokeberry plantations. It may also be used on other fruit crops. The joist is hung in front of the tractor and powered from any sprayer connected to a steering valve. The steering pipe in a lifting mechanism is connected to quick hitches in a tractor’s hydraulic. A hydraulic mechanism allows an easy lifting of the joist into a transport...

  • KRET - Currants Stubber

    KRET - Currants Stubber

    Currant rootstocks stubber is designed for grinding rootstocks of bushes after prior removal of the parts above the ground. This way the field for new seedlings can be prepared much faster. Currant stubber KRET has a simple construction and a reliable performance. The result of grinding depends a lot on a type of the ground and the size of the rootstock. The working part consists of a vertical rotation axis with four blades. It may be necessary to add...

  • PESTKA - Cherries Strewer

    PESTKA - Cherries Strewer

    Cherries strewer PESTKA is designed for picking cherries, prunes, and apples ets. The strewer is aggregated with a farming tractor with a three point hitch and an exterior hydraulic system. Strewing is done by catching and trembling a tree with a clutching arm. The fruits fall onto screens spread out under the tree (the screens are not a part of the basic set) and are then poured into boxes. Leaves must be removed with a cleaning fan - a currant...