9 products found
Kalfrisa, S.A. Products
-
Heat Recovery
With the heat recuperators an important part of the calorific energy of waste gases coming out from any productive process can be absorbed and transmitted to another fluid, normally the combustion air of the same process, so that savings in fuel consumption even up to 60% are obtained and also a drastic reduction of emissions to the atmosphere of Greenhouse gases.
-
Kalfrisa - Radiation Recuperators
In these recuperators the calorific power transfer between the primary and secondary fluids is basically made by radiation. Double shell recuperators offer a lower fuel consumption, even over 40%, because of a combustion air pre-heating and a compact design which allows their installation in the fumes ...
-
Kalfrisa - Convective Recuperators
Using steel plain tubes, in these recuperators the heat transfer between the primary and secondary fluid is made by means of ...
-
Hot Air Generation
The target of these equipment is the production of hot air required for several industrial processes. They can be compact or modular, depending on the power, temperature or pressure required for the process air.
-
Kalfrisa - Model VT, VQ y VK Series - Compact Hot Air Generators
Combustion chamber made of highly resistant to heat steel plate. Heat exchanger with steel tubes that vary their quality depending on the working temperature. Indirect heating, without mixing air and combustion gases. All types of liquid and gaseous commercial fuel ...
-
Kalfrisa - Special Hot Air Generators
Equipment specially suitable when working conditions (calorific power, temperature increase, working pressure, etc.) are over established limits for series or semiseries compact ...
-
VOC Abatement
For paints drying, inks, binders, etc. it is always required an air extraction that incorporates those evaporated compounds, whose emission to the atmosphere is not allowed as they are highly pollutant.
-
Recuperative Thermal Oxidation
Installations for VOC"s Volatile Organic Compounds reduction by means of thermal oxidation designed and manufactured by Kalfrisa guarantee an optimum efficiency, thanks to the appropriate selection of temperature, residence time and mixture ...
-
Recuperative Thermal Oxidation For High Concentrations
VOC"s abatement installations based on the recuperative thermal oxidation technology can treat flows with a very high concentration of solvents, even over 100% of LEL or LIE (Lower Explosive ...
-
Regenerative Thermal Oxidation
VOC"s cleaning system with a highly efficient preheating of polluted gases. It is essentially made of an oxidation chamber with two or more thermal exchangers. Accumulative masses made of ceramic material (regenerators) heat the polluted air almost up to the reaction ...
-
VOCs Concentration
When VOC"s content in emissions is very low and volume of polluted air high, it is usually very profitable to make a previous concentration of polluted gases ...
-
Waste Valorization - Liquid Waste
-
Liquid Waste
KL Series liquid incineration chambers have been developed to assure an efficient destruction of mixtures from different sources with very heterogeneous characteristics and also complying with the working conditions required by regulation in ...