LASKI, s.r.o. products

Our new handy stump cutter LASKI F360 SW is based on long-term experiences with our field-proven model LASKI F350. This machine is designed for cutting a stump, i.e. its above- and also under-ground part. Max. stump diameter to be cut is in fact unlimited (recommended up to 300 mm). Due to its swivel base this machine newly facilitates swinging motions of the head also horizontally. Braked chassis provides good stability of the machine. Automatic locks of the upper turnable part on the chassis and easy machine attendance facilitate any handling at work. Overall width of 650 mm makes also limited spaces and narrow sites more accessible.

Our handy stump cutter LASKI F360 SW is based on long-term experiences with our field-proven model LASKI F350. This machine is designed for cutting a stump, i.e. its above- and also under-ground part. Max. stump diameter to be cut is in fact unlimited (recommended up to 300 mm). Due to its swivel base this machine newly facilitates swinging motions of the head also horizontally. Braked chassis provides good stability of the machine. Automatic locks of the upper turnable part on the chassis and easy machine attendance facilitate any handling at work. Overall width of 650 mm makes also limited spaces and narrow sites more accessible.

Our stump cutter LASKI F460 is based on our field-proven model LASKI F450. This machine is designed for cutting of above- and under-ground stump parts by cutting in a swinging way. Max. stump diameter to be cut is in fact unlimited (recommended up to 800 mm). Due to its swivel base this machine newly facilitates swinging motions of the head also horizontally.Automatic locks of the upper turnable part on the chassis and easy machine attendance facilitate any handling at work. Overall width of 780 mm makes also limited spaces and narrow sites more accessible.

Stump cutter on tracked chassis hand-operated with an environmentally-friendly engine with fuel injection. Our stump cutter P 38 is designed for cutting of above- and under-ground stump parts. Thetracked chassis is wheel-track-adjustable. Its low centre of gravity provides high stability of the machine also under worse field conditions with maximum work safety. Minimum track base makes also limited spaces and narrow sites more accessible. It can even pass through a narrow garden gate only 700 mm wide. This machine is equipped with an environmentally-friendly engine with fuel injection.

Stump cutter on tracked chassis with remote control. Our stump cutter P 38 R - EFI is designed for cutting of above- and under-ground stump parts. Max. stump diameter to be cut is in fact unlimited. Thetracked chassis is wheel-track-adjustable. Its low centre of gravity provides high stability of the machine also under worse field conditions with maximum work safety. Minimum track base makes also limited spaces and narrow sites more accessible. It can even pass through a narrow garden gate only 70 cm wide. Its hydraulic control and remote controller facilitate any handling at work and make manual labour much easier. This machine is powered by a 35 HP petrol engine.

The chipper LS 160 P Track is a compact machine intended for disposal of wood waste, twigs, bark, branch-wood and other above-ground biomass, for chipping of redundant timber such as sticks, deals, pickets etc. and also for manufacture of chips from aforesaid materials. It can dispose all these materials with diameters up to 160 mm. Its turnable upper frame part is equipped with a swivel base so that the loading chute is accessible from any side. The chipper is also equipped with two loading rolls hydraulically controlled and linked to an automatic system as overload protection of its combustion engine. Furthermore, standard equipment comprises also an hour counter (daily/total) and an air-cooled 26,5 HP Kohler petrol engine with injection.