8 products found

Products

  • Bedding Plows

  • Model SL305   - Heavy Duty Middle Buster Plow-Skidder

    Model SL305 - Heavy Duty Middle Buster Plow-Skidder

    Heavy Duty Middle Buster Plow comes in a 4 point lift model which is suitable for the SK300, SK250 and CAT545 tractors. This unit is designed for the heavy palmetto and gallberry sites associated with north Florida and south Georgia. 5 Individual arms and 40' travel.

  • Model DB155 - 5 Arm Plow

    Model DB155 - 5 Arm Plow

    HP requirements 150 - 200 Skidder. 125 - 150 Crawler.  A Pull Type 5 Arm Plow with center tillage. This plow is versatile and can be pulled with either a Skidder or Crawler. 5 Individual arms.

  • Sub-Soil Plows

  • Model CRP122    - Two-Arm Ripper / Coulter Plow

    Model CRP122 - Two-Arm Ripper / Coulter Plow

    HP requirements 120 - 150 Crawler. 2 individual arms. Approx WT 5,500 lbs.  Two-Arm Ripper/Coulter Plow - with rear mount single cylinder fold up lift. This unit while operating on a float valve can maintain a continuous 16' to 18' ripper depth while contouring. The CRP122 has a bed width of 30' and is designed to minimize erosion and still cover the rip line for row definition.

  • Model CRP154  - Four-Arm Ripper/Coulter Plow

    Model CRP154 - Four-Arm Ripper/Coulter Plow

    HP requirements 150 - 200 Crawler. 4 Individual arms. Approx WT 9,500lbs. Four-Arm Ripper/Coulter Plow with rear mount single cylinder fold up lift. This unit while operating on a float can maintain a continuous 18' to 24' ripper depth while contouring. The CRP154 has a bed width of 84'.

  • Pasture Renovators

  • Model SHPR12-42    - Single Drum Units

    Model SHPR12-42 - Single Drum Units

    HP requirements 60 to 150. Single Drum units are available in many different drum diameters and widths. With optional hydraulic wheel lift. These units can also be transported readily on ranch roads.

  • Model HPR12-20  - Tandem Hydraulic Units

    Model HPR12-20 - Tandem Hydraulic Units

    HP requirements 100 - 200. Tandem Hydraulic units are a preferred choice in Pasture Renovators due to the two drums working in an offset arrangement. These units give you a lifting mulching action which allows water and air to go directly to root zone and increase density per acre.

  • Model HPR12-30B - Heavy Duty Tandem units

    Model HPR12-30B - Heavy Duty Tandem units

    HP requirements 200 - 300. Heavy Duty (B-Series) Tandem units have many of our Brush Cutter features such as boxed angle frame, wide flange beams and extra large bearing and axle systems. Pound for pound these units have more structural strength than any of our competition.

  • Brush Cutters and Weed Cutters

  • Model M10 - Brush Cutter

    Model M10 - Brush Cutter

    HP requirements 150 to 200. Rubber Tires. M Series of Cutters are designed for clearing brush that will be converted into improved pasture, or strip chopping for wildlife improvement. Works great in palmetto as well as mesquite.