Martatch Attachments

25 products found

Products

  • Adapters

  • Brooms

  • Martatch - Hydraulic Angle Broom

    Martatch - Hydraulic Angle Broom

    Excellent for snow cleanup, sweeping feed alleyways and outside yards. Does a fantastic job without creating dust. Hydraulic angle.

  • Martatch - Rotating Broom

    Martatch - Rotating Broom

    Angles both ways (manually with pin). Sweeps forward or reverse into bucket. Dump swept-up debris by tripping bucket manually. After dumping, bucket will latch into place when sitting on floor. Uses hydraulic motor to spin broom.

  • Bale Spears

  • Martatch - Agriculture Bale Handling Equipment

    Martatch - Agriculture Bale Handling Equipment

    Handles 2 large round bales (4' - 6' diameter). Handles 3-4 large square bales. The Bale Grabber is ahead of its time in versatile and sheer volume bale handling. Adjusts easily and without tools to different size bales. The right tool to handle large volumes of bales with ease.

  • Martatch - Bale Spear

    Martatch - Bale Spear

    Top Safety Frames are removeable for higher stacking capabilities under truss and low buildings. Safety frames available in 26' or 36' high. See-through backplate for better visibility at truck level. 32', 39' and 49' Spear lengths available. 46' wide frames (tines are 30' apart). Original Kverneland Tines – Simply the best on the market.

  • Large Bale Spear

    Large Bale Spear

    Designed to carry 3 or 4 large square bales. Hydraulic pusher to release bales from tines. Safety support to prevent bale fork from tipping when not in use.. 25' Tine spacing. 60' W x 54' H main frame dimensions. 60' W x 79' H total frame with extension. Hydraulic hoses included. Quick couplers sold separately.

  • Buckets

  • Compact Tractor & Skid Steer Utility Bucket

    Compact Tractor & Skid Steer Utility Bucket

    Specifically designed for Utility, Compact and other small Tractors. 1/8' Material used for body. Hardened side cutting edge for longer wear life. 1/2' x 4' hardened cutting edge. will custom fabricate to any size or specifications.

  • Skid Steer Loader Buckets

    Skid Steer Loader Buckets

    1/4' Material used for Body. Hardened side cutting edge for longer wear life. 3/4' x 6' Hardened cutting edge. Trailer Hitch for front towing vehicles. Will custom fabricate to any size or specifications.

  • Fence Unroller

    Fence Unroller

    Handles widths up to 8'. Adjustable boom and end plates. Available with forks to hold extra fence rolls or posts. Optional hydraulic grapple arms.

  • Fertilizer Spreaders

    Fertilizer Spreaders

    Spreads fertilizer, salt, sand and seed. Front or 3 Point Hitch mount. Hydraulic or PTO driven. This fertilizer spreader is available from 100L to 500L capacity.

  • Blade Grader

    Blade Grader

    2 Grading blades that are hydraulically adjustable for depth control. 2 Reversible hardened cutting edges. AR 400 Replaceable Runners. Comes with lateral and vertical float for ease of operation.

  • Grapples

  • Grapple Loaders

    Grapple Loaders

    Handles it all: Gravel, Logs, Garbage, Large Bales, Manure, Brush, Cement - the list is endless. 2 Hydraulic Grabbers work independently to hold uneven loads. Hardened cutting edge. Turns your skid steer into a multi-purpose machine without changing bits. Available from 48' to 96'.

  • Martatch - Stone Fork Grapple

    Martatch - Stone Fork Grapple

    Available from 60' to 108'. Useful for stones and heavy debris, logs, etc. Can be fitted on any front end loader or skid steer. 39' Conus II cranked tines – 34' useable length at 4' centers. Original Kverneland Tines - Simply the best on the market. Outside tines can be removed for better insertion into heavier materials.

  • Manure Grapple

    Manure Grapple

    Available from 60' to 108'. Useful for large bales, manure, debris, logs, stones, etc. Can be fitted on any front end loader or skid steer. 36' Conus I cranked tines – 31' useable length at 8' centers. Original Kverneland Tines - Simply the best tines on the market.

  • Model MLB - Lift Boom

    Model MLB - Lift Boom

    Adjustable boom length. Pintle hook on end. Adjustable from 48' to 78'. Extended capacity 1500 lbs.

  • Logging & Forestry Equipment

  • Martatch - Hydraulic Winch

    Martatch - Hydraulic Winch

    Will handle any job from logging to dead stock removal. Hydraulic 11,000 lbs. free spooling winch. 165' by 3/8' logging cable at 15 metres/min line speed. 25 gal/min/2700 lbs. hydraulic pressure. Self anchoring plate. Brush removal blade.

  • Martatch - Logging Grapple

    Martatch - Logging Grapple

    Two models available – from 40-80 hp and 80-100 hp tractors or skid steers. Grabs up to 30' logs. Chain Swivel. Clamps on the main frame to keep grapple from swinging when driving over rough terrain. Extra heavy duty construction. Front jaws grab hanging trees to drag back. Grabs logs on one end for easy piling. Useful for forwarding, sorting and piling logs.

  • Martatch - Manure Fork

    Martatch - Manure Fork

    36' Conus I cranked tines at 8' centers. 31' usable length. from 42' to 108' widths. Available in skidsteer and loader profiles. Original Kverneland Tines - Simply the best available on the market!. OPTIONAL: 32' Conus I cranked tines with 26' usable length.

  • Mowers

  • Flail Mower

    Flail Mower

    Available in 60' – 90' widths. High flow not needed. Vertical float. Adjustable side sliders. Hydraulic motor 30 hp – approx. 17-25 gallons / minute.

  • Hydraulic Arm Mower

    Hydraulic Arm Mower

    Designed for mowing on uneven terrain along roadsides etc. Available from 54' – 66' wide. Front castor is standard to ensure even travel on uneven terrain.

  • Rotary Cutter

    Rotary Cutter

    Available in 60”, 72” and 84” for 30 to 100 hp. high flow not needed. lateral and vertical float. adjustable side slides. hardened cutting blades. hydraulic motor 30 hp @ 20 gal/min with 40 hp gearbox. can be fitted on any front end loader or skidsteer. easily adjusts without tools for cutting along ditches, fences etc.. side shift for cutting under fences etc.

  • Pallet Forks

  • Martatch - Heavy Duty Pallet Fork

    Martatch - Heavy Duty Pallet Fork

    7500 lbs. capacity - 46' frame. Tines adjustable for width. 36', 42' and 48' Fork lengths. Standard Class II Forklift forks. See through back plate for ease of pallet insertion at truck level. Anti-slip step. 1-3/4' thick x 4' wide forks.

  • Heavy Duty Pallet Fork and Bale Spear Combo

    Heavy Duty Pallet Fork and Bale Spear Combo

    An economical choice with 2 tools in 1 attachment. Pallet fork tines attach and remove easily without tools. Bale Spear tines attach and remove easily without tools. Safety frames attach and remove easily without tools. 48' Bale Spear tines. 42' and 48' pallet fork tines. Pallet fork tines adjustable for width. Standard Class II forklift forks.

  • Regular Duty Pallet Fork

    Regular Duty Pallet Fork

    5500 lbs. capacity - 50' frame. tines adjustable for width. 36', 42' and 48' Fork lengths. Standard Class II Forklift forks. See through back plate for ease of pallet insertion at truck level. Anti-slip step. 1-1/2' thick x 4' wide forks.