13 products found

products

• Stationary Dryers

• 

  Mepu - Model S Series - Stationary Dryers for High-quality and Efficient Grain Drying

  S series stationary dryers — for high-quality and efficient grain drying. The new stationary S series dryers by Mepu dry the grain in a gentle, energy-efficient, and reliable manner even under challenging circumstances. Grain batch humidity has no effect on the outcome, since the grain is dried by circulating it through drying cells and equalizing the grain humidity in the top bin for so many times that the entire grain batch is fully...

• 

  Mepu - Model C Series - Continuous Flow Dryers for Efficient and Uniform Grain Drying

  The high-tech, continuous flow, warm air dryers by Mepu dry the grain in a gentle, uniform, and energy-efficient manner. The efficiency of the dryers is on a high level. The size, capacity, and power of the C series continuous flow dryers are flexibly adaptable. By adjusting the number of drying cells and grain bins, the drying solution can be tailored to the customer’s needs.

• Bins

• 

  Mepu - Flat Bottom Bins

  In Mepu bins, good grain quality is preserved over longer periods owing to the ventilated bottom. The correct, even bin temperature achieved with the help of efficient ventilation and cooling prevents grain damage. As accessories to the flat bottom bins there's a sweep auger (1) and a ventilated bottom (2) available.

• Mobile Dryers

• 

  Mepu - Model K Series - Mobile Dryers

  K series mobile dryers — for cost-effective and efficient grain drying. K series mobile dryers by Mepu are cost-effective, efficient, and quickly deployable warm air-drying units. The mobile dryer is easily movable from one place to another. K-series mobile dryers are equipped with ridged drying cells, elevator, pre-cleaner, furnace, a feeder device with rotating feed rollers and a conical base.

• 

  Mepu - Model M5 Series - Mobile Dryers

  Large M5 series mobile dryers by Mepu — for reliable and high-quality grain drying. Reliability and ease of use have been emphasized in the design of the new, practical M5 series by Mepu. M5 series dryers are based on the same proven technology as Mepu’s high-power continuous flow dryers. The advanced drying technology employed ensures a high-quality outcome and quick and energy-efficient drying of the grain.

Products by Skandia Elevator AB

• L-LINE - Belt & Bucket Elevators

• 

  Model SE140 TVM - Belt & Bucket Elevators

  SE140 TVM is manufactured from galvanised material and in accordance with the EU machinery directives. It is as standard a Category II 3D/0D Elevator and complies with the European ATEX directive 94/9EC. It is suitable for most materials to be handled in a farm drying and storage plant. SE 140 TVM is available in four models: 20, 30, 40 and 60. The different models give the following capacities when feeding on upgoing leg side. Remember that every 1%...

• L-LINE - Chain Elevators

• 

  Model KE 40 - Chain Elevators

  KE40 is manufactured from galvanised material and in accordance with the EU Machinery Directives. It can operate with most granular materials, flour and meal and at any angle between 45-90°. There are three different feeding alternatives: A: direct fed from a pit, B: onto a front leg enclosed inlet or C: with side feeder screws. It is as standard a Category II 3D/0D Elevator and complies with the European ATEX directive 94/9EC, when the external...

• L-LINE - Chain & Flight Conveyors

• 

  Model KTF - Chain & Flight Conveyors

  Manufactured from galvanized material and in accordance with the EU machinery directives. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC.Reversing is possible for lenghts up to 25 meter. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21 and the external is unclassified. If the conveyor operates in a plant where the...

• 

  Model KTF/R - Chain & Flight Conveyors

  Manufactured from galvanized material and in acc. with the EU machinery directives. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21 and the external is unclassified. If the conveyor operates in a plant where the external atmosphere is classified as Zone 22, Electrical...

• 

  Model KTFb - Chain & Flight Conveyors

  Manufactured from galvanized material and in accordance with the EU machinery directives. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21 and the external is unclassified. If the conveyor operates in a plant where the external atmosphere is classified as Zone 22,...

• 

  Model KTA - Chain & Flight Conveyors

  Manufactured from galvanized material and in accordance with the EU machinery directives. It is suitable for 15°, 30° and 45° degree conveying. Brush gear for intermediate outlet cannot be used on KTA. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21 and the...

• 

  Model KTAb - Chain & Flight Conveyors

  Manufactured from galvanized material and in accordance with the EU machinery directives. It is suitable for 15°, 30° and 45° degree conveying. It runs very quiet and is totally enclosed and dust free in operation. Brush gear for intermediate outlets can not be used on KTAb. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling...

• 

  Model KTB - Chain & Flight Conveyors

  Manufactured from galvanized material and in accordance with the EU machinery directives. It is suitable for 15°, 30° and 45° to horizontal conveying. Brush gear for intermediate outlets can not be used on KTAb. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21...