Moresil, S.L products

The corn head MR-800 model has multiple options for configuration according to the different needs of each client and market. This can be manufactured at any distance between rows from 50 cm, with upper chain on hoods and side augers to harvest in extreme conditions with all the stalks blown down, stalk chopper, metal or plastic hoods, interchangeable rollers with opposing or alternate blades, chain drive in self-lubricated sealed box or gear groups, fixed or folding frame, etc.

This header can be adapted to any type of harvester. Available in multiple lenghts from 5 mts in increments of 0.5 m, although you can make any measure on request.

The GBE model is a version of the GB model, specifically designed to work at high speed, which allows greater efficiency in its cleaning. The reel is equipped with pushing parts to improve the feeding and avoid any accumulation of crop.

The Moresil sunflower harvesters (4 to 12 rows) leave the factory adapted to the make and model of the combine harvester requested. In each case they are equipped with the elements necessary to achieve optimum performance. The width between rows varies between 500 m/m and 800 m/m. Row spacing: Available in multiple measures, but we can make at any distance on request. Adjusting system to the combine interchangeable and adjustable to change the tilt of work, and adaptable to any combine.

The three-wheeled Moresil BM 300 Buggy is fitted with state-of-the-art technology that enables it to electronically control the movement and vibration of our olive, nuts and fruit trees (almond, nuts, pistachio…), making it possible to choose the most suitable programme for each type of crop. It is also possible to control the power unit which, thanks to its efficient programme, can provide significant fuel savings (more than 30%)

The Magnum multi-purpose vehicle has been designed to perform all necessary tasks in the harvest of olives, nuts and fruit trees (almonds, pistachio, apples…) ensuring a profitable exploitation. The machine stands out for its great agility and manoeuvrability on the ground thanks to a hydraulic high performance and reliability based on the experience gleaned by Moresil. It has a Deutz engine with 120 HP and hydrostatic transmission with 4 wheel drive with independent pumps for each axle.  We use hydraulic components from high reliable brands such as Danfoss, Poclain, Parker, etc.

Machine for harvestingsuper-intensive crops. . Large-sized thinning tunnel for harvesting .super-intensive olives of different sizes. Improves the amortisation of tractors, as it can be used during the rest of the year for other tasks. Better use of the plantation surface area of the farm, as it does not need dividing lanes for unloading the hoppers.

Maximum clamp opening: 400 mm. Recommended trunk diameter: up to 200 mm. Tractor power requirement: from 65 HP.

The machine M-8 has been designed to comply with the present standards for modern installations in regards to cleanliness and selection of such grains and cereals as wheat, barley, corn, sunflower, rapeseed, vegetables, etc. It was devised for procuring high yield and thorough removal of impurities reaching percentages well under the official requirements.