Mustang - Manitou Americas, Inc. products

Operating Weight (kg): 9,500 lbs. (4309), Static Tipping with Bucket - Straight (kg): 6,743 lbs. (3059), Bucket Hinge Pin Height (mm):  130.5" (3315).

Operating Weight (kg): 10,920 lbs. (4959), Static Tipping with Bucket - Straight (kg): 7,907 lbs. (3587), Bucket Hinge Pin Height (mm): 136.8" (3474).

Mustang`s industry-exclusive IdealTrax™ Automatic Track Tensioning System eliminates the need for manually tensioning the tracks on the loader before operation The Mustang 1050RT Track Loader is taking performance to the next level. Height to Hinge Pin (mm): 109" (2769). Rated Operating Capacity (kg): 1,050 lbs. (476). Power (kW): 35 hp (26) @ 2800.

Height to Hinge Pin (mm): 119.6" (3038), Rated Operating Capacity (kg): 1,650 lbs. (748), Gross Power (kW): 69.9 hp (52.1) @ 2300.

Height to Hinge Pin (mm): 110" (2974). Rated Operating Capacity (kg): 1,350 lbs. (612). Power (kW): 46.6 hp (34.3).

Net Power (kW) : 33.1 hp (24.7), Maximum Torque (Nm) : 80 ft. - lbs. (108), Rated Operating Capacity (kg) : 1,050 lbs. (476).

Net Power (kW) : 44.5 hp (33.2), Maximum Torque (Nm) : 108 ft. - lbs. (146.2), Rated Operating Capacity (kg) : 1,350 lbs. (612).

Performance: The demand for a Mustang by Manitou 1,500 lbs. (680 kg) capacity skid steer loader has been fulfilled with the introduction of the 1500R NXT2. Net Power (kW) : 44.5 hp (33.2) Maximum Torque (Nm) : 108 ft.-lbs. (146.2) Rated Operating Capacity (kg) : 1,500 lbs. (680)

Load Capacity of 850 lbs.  Lift height of 96”. 24-hp Yanmar diesel engine. Radial-lift arm design. Ground speeds up to 5.5 mph. Operator-friendly Level II-certified ROPS/FOPS. Auxiliary hydraulics of 9.1 gpm. Machine width as narrow as three feet with 5.70 x 12 Chevron tire set. Safety Interlock System requires operator to be seated with restraint bar down prior to operation. A tiltable ROPS/FOPS allows for easy access to maintenance points. Machine shipping weight less than 2,900 lbs.

Load Capacity of 1,050 lbs. and 1,175 lbs. with optional counterweight kit. Lift height of 108` . 35-hp Yanmar Interim Tier IV diesel engine. Fast ground speeds up to 5.9 mph. Radial-lift arm design. Operator-friendly Level II-certified ROPS/FOPS. Spacious operator compartment gives operator more comfort and excellent visibility. Auxiliary hydraulics of 14.5 gpm. Machine height of 70.3 inches and a width of 48.4 inches allows entrance into buildings with low clearance. Drive motors utilize SAHR (spring-applied, hydraulic-release) brakes as standard equipment. Safety Interlock System requires operator to be seated with restraint bar down prior to operation. Excellent bucket breakout force of 2,800 lbs. for extra power in tough digging conditions. Tilt-up ROPS for easy internal service access.