OBIAL - Altuntaş A.Ş. products

Being aware that high-quality production is only possible by specialized personnel, modern production techniques and full-automated production, OBIAL zinc-plated steel silos and conveyance equipment are designed by the product development/design department to address all grain storage requirements and produced accordingly. High-quality zinc-plated metal sheets used in silo production resist 450 MPA and are corrosion-resistant. The custom produced metal sheets used in the production of our silos have a zinc plating standard of 450 gr/m2 and 350 gr/ m². The zinc plating ratio changes according to customer demands. OBIAL offers difference silo options, including flat and conical-bottom silos, starting from a diameter of 4.51 m diameter to 31.60 m.

OBIAL conical bottom grain storage steel silos can be used for multiple purposes. Conical bottom steel silos’ conical bottom angles are produced at 45-65 degrees according to the type and flow characteristics of grain to be stored. Conical bottom steel silos can especially be used in animal farms handling storage operations of various types of grains, and in facilities including feed and flour mills. They are also optimum for short-term and temporary grain storage. Side wall sheets, suspension supports and access doors of all OBIAL conical bottom silos are made up of zinc-plated steel sheet. Steel, due to its structural characteristics, is very resistant in conical bottoms. OBIAL offers you conical bottom steel silo options in various sizes and capacities from 2,11 m to 10,83 m.

OBIAL bucket elevators economically carry the grains vertically. The elevator system is designed for grains and is designed for the heaviest working conditions.

OBIAL chain conveyors are available with capacity ranging from 45 up to 500 t/h. OBIAL chain conveyors transport the grain horizontally or angularly, free of damage and in an economical way.

Produced from Magnelis sheets, OBIAL multipath distributors are used in distributing the grains and are located under the upper cap of the elevator. Thanks to its insulated structure, it doesn’t permit release of dust. Screw assembly system is used on all joints of the distributor. The flow path of grains may be set as desired using a switch. OBIAL distributors are being produced with a capacity and strength to ensure problem-free operating in high-tonnage filling and discharge systems. The motors and sensors used on the distributor can easily be disassembled and replaced in case of any failure. The distributor frame also houses an observation lid to monitor the flow and to detect and remedy any failure and clogging in the distributor piping.

The lower discharge conveyor helps the grains in the silo Tobe conveyed out of the silo. Thanks to the lids over the conveyor system and the mechanism commanding these lids, the silo can be safely discharged. The command center first opens the central lid, not letting other lids to be opened. After the flow from the central lid ends, the other intermediate lids are opened. The conveying system is produced from zinc-plated sheets. The power is directly conveyed from the motor reducer to the drive shaft in the conveyor. This ensures a more efficient and safe operation of the conveyor.

Working Principle Fan aspirates air into combustion room through shutters and forms a controlled mixture with the gas coming from installation. This mixture is burned by the burner. The heat formed advances along combustion room with the help of burner fan and upper aspirating fan and passes through transition channel and is transmitted to air channels of product chamber.

Ventilation systems built according to the silo capacity and the characteristic of the grain to be stored are installed into the concrete during the laying of the foundation concrete. The secanals are coated using specially twisted and perforated Magnelis sheets specially designed for the product.